65 Piece System 4 ESD Safe Master Technician Ratchet and MicroBits Set

This is my to go choice for electronics and computer repair work and works well on knives, multi tools, and other tools I want to maintain. It has pretty much anything you could need short of a number of a number 2 Phillips had due to sizes of the micro bits. The bits are wiha’s standards so I have never had a problem with them deforming from pressure and have a long usage life. The ratchet gives you enough torque to do harder work, the bit holder works great and turns really well and is protected against electroshock. I did add a couple,of plastic spudgels to open devices such as laptops without scratching and there just enough room in the metal case to hold,all the parts together and well protected. and all in one good steel case that holds the whole kit together. Any missing bits are going to be really rare,like triangle bits and certain security bits that need specialized tools, but for 99.9% of your jobs this will do.

I'm a computer service technician. I work on laptops, desktops, tablets, cell phones, routers, ATM machines, and printers.. This is hands down my favorite precision tool set. The quality of the case, driver, bits, etc are all top notch. I held off buying these for a while, because the price is so high. At first I went cheap and bought the Home Depot HDX 23 Piece Precision Screwdriver Set for $11. The design and packaging was nice, but the quality just wasn't there. So then I bought a set by Moody Tools for around $43. They were made the USA and from good hard metal, but the design wasn't very good for field work. I reluctantly returned them and splurged on this set, fully prepared to be disappointed. I was not. The Wiha set was packaged very well. The case feels solid, not cheap like an Altoids tin can. It's lined with a neoprene type of foam with easy to read labeling. The bits themselves are also labeled. Every bit is sharp and without defects. The handle is light weight but strong. If I look at these with a super critical eye, my only complaint is I wish Wiha shipped these with the PicoFinish driver instead of the standard driver. Otherwise it's a near perfect set for my use. The bits are a little hard to push in and pull out, but that's actually a good thing, because I hate when bits wiggle. I'll probably never use the little wrench, but it's still pretty cool to have. If your looking for a "computer repair tool kit" and your doing this professionally, this is the kit to have. Don't waste your money on a cheap iFixit kit or anything by Tekton, Belkin, or Rosewill. Those kits are trash. If you need a bit and it's not in this set, buy it as a one piece driver. You'll be much happier with Wiha tools, even though they cost four to five times as much as other sets. The quality is just so much better.

So to sum this up I’m a longtime Wiha fan. They make great tools and some of the best steel used on their bits. However it shows... *country of origin:China* and I contacted KCTools about this. The KCTOOLS rep live chatted with me and told me it’s a German/Vietnam made product... which it was to be fair. So after telling him this he told me he was going to change the listing and HE DID?! But, a couple years back Wiha had moved production to China and with supposedly the same specs and materials as their German branded Wiha. However, we all know China is a quantity over quality and Wiha cleverly announced a “collaboration” with China on a Xiaomi Mijia 24/piece precision screwdriver set. To be fair the set is only $29 (at this time) and I can tell you those bits are NOT Wiha grade. Look at the reviews and you’ll see broken bits and all. My point is after telling the rep this (because I am going to send these back and look into Felo) he insisted on changing the Amazon listing *country of origin:Germany* which is simply it true! This is why I’m leaving a poor review. I can’t (and won’t) speak on the quality because I haven’t used them yet and to be fair the bit set seems to be of quality steel. The ratchet is nothing special and the tolerances seem off. But the ESD seems to be the PICO quality finish I have on an older set. My point being is I don’t know why they’re not being upfront about this? I’m sure people will do their own “due diligence” and see for themselves. But, I refuse to pay $100 for a Chinese manufactured set trying to pass for German made. I got news for everyone Wiha is now MADE IN CHINA... and this listing should not say Germany for Country of origin. But the rep said he was changing it from China back to Germany?! *Poor form KCTOOLS* Edit: So I have a Kershaw Cryo that needs the torsion bar replaced. Problem is I already chewed up two brand new T6 bits. One was a Walmart special (no surprise there) and the other was from an iFixit kit. Well the Wiha bits did there job and performed as I hoped they would, breaking the blue loctite with relative ease. I couldn’t move one of the screws even a little with the other two bits... so the bit quality is definitely there. I lost a good portion of my tools due to a rather nasty breakup so I have some catching up to do, but I will be keeping this set unless something drastic happens. At least the bits were properly heat treated and to be honest that’s really what I bought this for along with the 1/4” adapter. So I’m going to raise my rating because the tools did their duty and that’s all that matters in the end.

I received a set of these as a Christmas gift 5 or 6 years ago and it's become my favorite MicroBits set. I have at least 6 other bit sets (and probably more), but few get any use since I got this. I liked it so much that I bought a second set to keep at work and I've bought two others to give as gifts. The bits themselves are robust and don't show as much wear as you get with cheaper sets. My only minor complaint is that I would prefer if the extender was magnetically attached to the handle. It comes out too easily. Other than that, it's wonderful.

A must have for microwork. Includes virtually everything you will ever need with Wiha precision and quality

Nice set, very much complete!

Great Wiha set when it comes to micro 4mm hex bits. I like that it has the Pentalobe bits Pl1, Pl2, Pl3, Pl4, PL5,PL6 which open Apple electronics. Comprehensive set and really could use Microstik, Triangular and lifter. Best of both worlds purchased Wiha Go-Boxes for Torx iP and WERA ESD complete set of precision screwdrivers. Life is short too be aggravated by inferior tools. Big D

Es necesario decir que se trata de un set de micro puntas de precisión por lo que no está destinado a trabajo pesado. El usuario de este kit serán técnicos e ingenieros que arman o reparan aparatos electrónicos, biomedicos, ópticos u electromecánicos de pequeño tamaño. Las puntas son de excelente calidad, el acero se aprecia sumamente duro pues a pesar de usarse en tornillos apretados e incluso dañados no se nota deformación en la punta, ni siquiera en las más pequeñas. En mi caso, se utilizan principalmente para darle manteniendo a impresoras 3D y equipos de medición electrónicos y parece que el conjunto puede durar años en estas aplicaciones por la calidad que tiene. El kit incluye un adaptador de 1/4 hexagonal a 4 mm que es la medida de todas las puntas. Este adaptador permite usar las puntas con cualquier bit holder de 1/4 o con la matraca incluida, lo que aumenta la versatilidad de este conjunto. En resumen es una excelente compra, espero tenerlo mucho tiempo y desquitar su costo que si es algo alto.

Excelente qualidade e funcionalidade

Covers a wide range of uses. Good quality.