60‘’ Triple Row Tailgate Light Bar

This one is awesome. Super bright and I really like the fact that all functions work independent and keeps working when other functions are enabled. The turn signal continued to flash when the brakes are applied. Other light bars can have only one function at a time and the turn signal stops flashing when the brakes are applied. The sequential turn signals add a lot to this light bar and looks awesome when flashing. The reverse lights are very bright.My Nissan had a 6 blade trailer connector. I used a 5 pin converter to the 6 blade connector. For the reverse light connection, I connected a terminal pin to the light bar reverse light (red wire) and inserted into the 5th hole in the 5-way connector and pluged the attached plug in the remaining pin holes. (photo-3). The attached 4-way plug appears to be not standard in width. See attached photos 1 & 2. The spacing between pins are slightly narrower. You can still insert into a 4-wayor 5-way receptacle, but it won’t go all the way in. The light bar does comes with a matching 4-way receptacle (match perfectly) that you can hard-wire to the truck which then allows you to disconnect the light bar by just unplugging it from the supplied receptacle.The only minor complaint is with all these lightbars besides the plug being undersized, is that the wires to the plug should be 6-12 inches longer, to make it easier to route to the trailer receptacle when one is available.5 stars for price, fully functional in all mode, exceptional brightness, great backup lights, extra mounting clips, matching 4-way receptable to facilitate hard-wiring without removing the attached plug on the light bar.

The installation was easy and the led lights are very bright, especially at night. I installed the led strip in my new Chevy Silverardo and it gives it a much nicer look. My truck is a dark blue color so even in daylight, the led lights shine bright. Once I took off the red film from the tape, the light strip stuck to the metal really well. I found that by cutting the red film in the middle, It was easier to align the strip by peeling the film outward to the ends. It's well worth the price.

Fits on my Ram Rebel 2016.Took me about 5 mins to install. Wipe clean the tail gate bottom. Peel and stick nice and easy. Plug into the Hitch eletrical outlet and works like a charm. Make sure you have some Zip ties and eletrical tape to secure the exposed wires. Will see how it functions in weather and few months of use. For the value, you cant go wrong

I purchased this light strip to install on the rear of my travel trailer. It really looks nice on the back end and seems to work well. With all the lights on, the circuit board appears to get overloaded and show some signs of hinky lights! But if I'm careful, I think it will add some safer lighting to the rear of the trailer.The problem shows itself when the running lights are on, the brakes applied and the brake lights are showing, and I have the four-way flashers flashing. At that point the amber four-way lights on the bar don't work quite right and are intermittent in their flashing. Almost all other situations have the light bar working correctly. I will see soon how well they work since I'm about to take off for a three-month trip.

First off, this bar exceeded my expectations. The reverse light alone is worth the price of the product. The brake and running lights are what I expected. But the turn signals sequencing? That sent my review over the top. I would have rated a solid 5 if not for the fact that I had to do a little more than just hooking up to the existing trailer wiring. In the late model F150's (and I'd assume other F-series trucks) have computer integration to the trailer wiring and the truck thinks there is a trailer attached which disables the backup camera and backup assist, not to mention a constant warning that there is a problem with the trailer wiring. My remedy for this is to run the majority of the wiring to the drivers side tail light and tapping the passenger tail light for the right turn signal wire. This addded a half hour to the install, but I could not be happier with the end result. Now, to see how long it lasts, fingers crossed.

For some reason my display keeps showingTrailer plug disconnected/ Trailer plug connected. This is about every 45 seconds.Can’t get it to stop. Everything is connected well. What could be the problem?Everything works great on the light bar.

The light has three led strips yellow for turn signals, red for brakes and white for back up. The lights are bright and the backup lights makes reversing at night great as it lights up everything behind you. They installed right to my tow harness with a spliced connector making it easy to install. Much better features than other items selling at the sam price or more!

It was very easy to install. However the wire for the backup light tried to use a quick connect but the size of the wire is two small compared to the wire for the back up light on the truck spliced them together and it works great