CHURERSHINING EVA Teak Decking Sheet for Boat Yacht Marine Floor Carpet Non-Slip and Self-Adhesive Bevel Edge 94.5"x35.4"

Low quality Chinese product. The glue let go from the product itself (stuck to the boat floor well). Didn't last two weeks. Don't buy this product, the seller was less than helpful...It has been a year and the product is in terrible condition. The silver has worn off and needs replacing. DON'T BUY!

I picked this up to see how well it would work on the cabin sole of my old sailboat. The boat isn't high class, and not warranting much money thrown at it's feet, so I picked up a roll of this to see what it would look like.The back is VERY sticky. That said, a lot of people mention it doesn't stick well. I imagine a majority of that is due to surface prep. I also used 3M spray adhesive in addition, mainly for the edges just to be on the safe side. It's been down for about a month and a half now, and so far, the corners and edges are still stuck just fine.I laid it out in the sun for an hour or so before installing, with weights on to flatten out, but would definitely recommend longer. The other thing to note is that once the backing is peeled off, you might have a little shrinkage in overall length. I lost about an inch once the backing was off. It might be possible to stretch it while installing after this, but in my case it wasn't needed and I felt like letting it lay naturally would be my best chance at adhesion. So far I'm happy with it, though it would've taken a lot more time to do a good job if I was more concerned about proper fit and full coverage.So far it's holding up well, the first thing people say when they step on is "oh this is foam?" so I take that as a good thing. It does tend to collect little bits of garbage in the grooves but a small vacuum takes care of that simple enough. For as low cost as it is, it definitely seems to cover nicely, and since I didn't need to worry about perfection, it's perfect for me.

Right now, Im giving this 4 stars because it looks great and was easy to install. There were some corners that didnt stick very well, so we used some marine adhesive. We also put a bead of deck caulking around all the edges to cover the raw edge. Based on some scuffs that appeared during the reassembling of the boat, I question its durability. But will update if needed. Have received compliments on it though!

I was very skeptical after reading some reviews, but this product was amazing. Very thick, feels great on your feet. Easy to install (with the exception of cutting templates). I have taken the boat out several times, and it is still completely in place. Very happy with it! Equivalent sea deck would have been 2k. Worse case scenario it comes up and I spent 200 bucks. But I really think it’s a good product that is going to last!

Looks as good as the expensive custom made ones at a fraction of the price. I made custom borders to my install to make it look a lot better and more of a custom look. Takes some time to do but in the end, the results are amazing. Like others have mentioned, They do start to peel off after a while. I suggest you use the 3M Spray adhesive or similar during installation so that it holds better.

My 15ft aluminium flat boat has a smooth aluminium floor. Everything would always slide around and my dogs hated taking boat rides because they couldn't get any kind of grip anywhere. Not t mention if it was the least bit wet then it was VERY slippery. This product fit perfectly and solved all of my problems.

After several near misses and finally actually slipping and falling into the lake, I decided I needed to do something about the surface of my boat’s swim deck. When I received the product, it wasn’t quite what I was expecting. I was expecting a more rubber material, but this pretty much foam, not very rubbery. I was concerned it might not be very durable, and might need some additional adhesive to make it stick. So far, my concerns have been unfounded. If you clean the surface well (I used acetone) it sticks down quite well on its own. You can cut complex shapes with a razor blade, and I found it to be tough enough to dull a razor blade pretty quick. Seems to withstand shoed foot traffic surprisingly well, but it’s still early yet. I used a couple strips of it on my boat trailer fenders too. I’m sufficiently impressed with it that I’m considering re-doing the entire boat floor with it, but I’m going to wait a while and see how it holds up on the swim deck. The traction improvement is significant, and it provides a little cushion too, which is nice when kneeling.

We refinished our boat floor with this and it has been EXCELLENT! It’s soft to walk on but not slippery at all when it gets wet.

Glad we read the reviews. This is a Kingfisher Aluminum boat. We acetone and then windex’d the floor before applying. We also sprayed the 3mm adhesive down before putting the flooring down. The backing paper and adhesive is “ok”. The cut outs of the flooring aren’t square which wasn’t a big deal for us as we had plenty of extra.We outlined the position of each piece with painters tape. The. Used a large sheet of poly caper barrier to trace and outline the pieces. Took the Polly and put the foam flooring underneath it and cut it out. It took us about 4 nights to do all this but turned out great.The flooring is comfortable and durable. I have dragged coolers, fish, crab traps, and prawn traps across it. It never tore or lifted but we spent a lot of time carefully applying the flooring down. Our dog really liked it when we put this down as she has way more grip so do the kids.One of the only complaints I have is it’s hard to clean. If you have dirty shoes or even walk from the dock onto the boat and dirt gets on it it takes a bit of elbow grease to get everything cleaned. It doesn’t hold stains but does take a bit to scrub it. I never had problems with it lifting or bunking in the sun.I would use it again.

Excellent product however when into the second roll the paper backing had a seam which appeared to be part of the manufacturing process. After cutting our template we pulled back the paper and it pulled the glue right off where the paper backing was connected. Waiting to hear back from them and will update with a review on the customer service.The product is easy to cut, easy to install, looks great and feels great on the feet.

Le voilier à pris un coup de jeunesse !!! s'installe facilement le seul hic du moins pour la première été il dégage une poussière brun sable qui colle au vêtements lorsqu'on s'assoit dessus ......... bon c'était la première été on verra bien cette année !

Très bon rapport qualité prix s'installe assez facilement resiste au tache de vin rouge mais l'ennemie de ce tapis est le tison de cigarette déconseillée de fumer lorsque vous êtes sur ce tapis. Très satisfait de la pose et de la qualité de ce tapis. Pour l'endurance le temps le dira.

Les deux tapis ne sont pas de la même teintes et de plus ils ont été coupés croches.Dommange j'aurais bien aimé les utiliser dans mon bateau.Norman.