Color:yellow ✪ ApplicationInstruction: 1. Pick you design2. Reversethe pattern and cut it onto the vinyl sheet with a craftcutter3. Weed out the excess to revealthe pattern4. Heat an iron on mediumsetting Pre-heat your iron to 150°C~170°C,NO STEAM5. Warm the material on which the design is to betransferred6. Make sure there are nowrinkles on the material7. Place thedesign, glossy side up, on your cloth8. Place teflon sheet over the vinyl sheet9. Use the iron with medium pressure on the pattern to transfer itto the garment10. Press for 5–10seconds over the entire pattern and remove the iron11. Check the design, if any part of the design lifts or peels,replace the Teflon sheet and reapply pressure for another 5-10seconds12. Cool peel off the backingand your garment isready✪ How to heattransfer? Transfer Time:5-10s Peeling method: Cool peelingTransfer temperature: 150-170°C Transfer pressure: 3-4P  (Above0.2kgf/cm^2) ✪ Note:1. These vinyl sheets are COLD PEEL2. If you are having trouble, try turning the shirt 90 degrees andpressing again, this should eliminate problems from coldspots3. If you've already ruined oneshirt, keep using it to experiment. Cut small pieces of heat transfer and tryraising or lowering your temperature, or pressing longer or for lesstime4. Keep in mind that more is notnecessarily better. Often when people have trouble they raise the temperaturebut that may be the wrong thing to do, sometimes you need to lowerit5. Not suggest to make tiny picturesor thin lines (because if the picture you want leave the layer, it should be stickagain by glue)
M**L
Great deal on great vinyl
I love this vinyl! We used it to make onesies for our gender reveal. It is very thick - but honestly I think it sticks to the clothes better. I had the change my silhouette settings to a 10 for force and a 10 on the blade but it worked perfectly after that. Definitely play with your settings before cutting a big design
M**Y
It’s okay. Not my first choice.
This stuff is thick, so you have to adjust your blade settings accordingly. Once it adheres to the garment it’s great, but it does better as a cold peel. I had to press a couple of times to get it to stay on the shirt. It’s get hard to weed. My advice would be to set it on the bottom part of the heat press, get it warm so it will loosen up the glue for easier weeding.
C**C
Great packaging
I love the extra steps they took for packaging, loved the orange color. It's exactly what I was looking for. Only giving 3 stars because it was a bit difficult to weed and the once on the garment, I followed the instructions they provided, it was pretty difficult to pull the backing off. Once it was on the shirt though, it looked awesome. It just took a little more effort than say Siser brand.
B**Z
Needs better size explanation
Packaging is cool! Loved the detailed instructions on here. Disappointed in the size of the glitter sheets. I was expecting all 12×12 sheets. Description does not depict anything different. When you read the detailed description, almost the last line says 12×12 & 10×10, but even there does not say in this package bundle you receive 16, 12×12 sheets of solid colors and 4, 10×10 sheets of glitter.
M**0
Perfect
Easy to cut, durable, great color. We made our own logo and ironed these vinyls on to some drawstring backpacks and they were wonderful.
P**Y
Nightmare To Weed!!
I’m not sure what was wrong with this vinyl, but it was very difficult to weed. I’m thinking it was old or something. I actually HURT MY HANDS trying to remove the vinyl from the sheet. Most of it I had to tear off in pieces. Hard to weed, and peeling after pressing was a nightmare as well. Will not be purchasing again.
A**Y
Great!
Loved this starter pack!!Worked great! Holds up through washing and drying
M**E
true color
Easy to weed. Iron on time was minimal with maximum results. Colors are beautiful
Trustpilot
3 weeks ago
1 month ago
