Vibra-TITE 213 Red VC-3 Original Threadmate, 250ml Can

Works great. Not a thread locker. Service removable.

Had great luck with this stuff... it's just EXPENSIVE. But used it on a bunch of stuff and had no issues. Works as advertised!

This is the best threadlock on the market . It remains pliable & can successfully be loosened & retightened several times before a need of reapplication .

I love my Smith & Wesson SW22 Victory .22 pistol, but from day one I was unable to keep the takedown screw from loosening after 50-100 rounds. That screw is a major design flaw in the Victory, and I had resigned myself to stopping after every 50 rounds to tighten it. Then I came across a suggestion on the S&W forum to try this Vibra-TITE thread locker, so I ordered a tube here on Amazon. This is truly the answer to the Victory's takedown screw. I covered about half the screw's threads with this stuff, waited 15 minutes, then put the gun back together. I went to the range and ran 200 rounds through it and that takedown screw never moved. Here's the problem with the Victory's takedown screw as I see it. When you insert that screw and begin tightening it, it offers no resistance whatsoever until it reaches its final 1/8th turn or so. Because of that lack of early resistance during the tightening process, if it loosens even a tiny bit during a shooting session there is no resistance to keep it from unscrewing itself. Enter the Vibra-TITE thread locker. With this stuff on the threads, there is instant resistance when you go to tighten the screw. You can feel the resistance, and you just know that screw is not going to easily come loose. And just one application is good for several shooting and cleaning sessions; you don't have to reapply it after every removal of the screw. It is the perfect fix for the SW22 Victory's poorly-designed takedown screw, and I highly recommend it for that purpose.

It works great. It's better than standard thread locker since the fastener remains adjustable and it can be removed and reused several times. But I think the price is absurd.

It works but close the jar fast or it can dry out. It may be better to buy the smaller squeeze tubes.

I love this Vibra-Tite VC-3! I like it that I don’t have to wait 24 hours so the blue loctite I used to use will cure before I can shoot it! I won’t use anything else! Thank you!

After reading some reviews and with the recommendation of a couple of g-nsmiths, I decided to try this. I've yet to use it on a fire arm or optics, but I've used it on some outdoor power tools and on a wood chipper/shredder where the manufacturer recommended "blue" thread locker. This seems to work better. There is a delay since you'll have to wait for the product to dry before assembly. Then it somewhat feels like you're using nylon lock nuts when you're threading the nuts on. There's definitely resistance there. So far it seems to hold the nuts and bolts in place. There hasn't been a change in torque values (for the fasteners that have such requirements).

Works really well. Locks the threads but still easy to remove.

It's good

Small quantities, only air in the tube

This product makes bolts & nuts secure from loosening against vibrations. It is easy to put appart and reuse not more than twice.

This was recommended to me for use on rifles where blue locktite just wasn't keeping screws from backing out. I tried it on a couple particularly troublesome pieces and it has so far held tight past the point where the blue would have failed.