Non-Ticking Hands Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (1/4 Inch Shaft Length)

This clock said "Made in England", which unusual & it has my family name on it. When the clock movement became erratic, I didn't want to get rid of it. I have never thought about replacing the clock parts on a wall clock, but of course Amazon had a million. I did order one with no hands. It measured perfectly with the original, so for $6 or $7, I thought why not. But my original hands didn't fit. I would recommend getting one with a variety of hands. Installed in about 5 minutes and even has a second hand that the original didn't have. As far as accuracy, don't know yet, but it has worked for an hour or so just fine! I also like that this one is a "No-Ticking" clock.Follow up; it's been several weeks and it keeps perfect time. The second hand is perfectly synced with my a phone.

I liked the option of hand styles offered. I love the red colored second hand. It adds something special! The mechanics work well!

I had to replace the clock mechanism for my 48-year-old Dark Side of the Moon rock clock. The white hands were an exact match, as the original hands from the older clockwork could not be reused. The mounting and assembly instructions are provided and are simple and basic. However. the shaft length is listed as 1/4", and the record is 1/8" thick. There is a plastic washer that acts as a buffer between the back of the record and the face of the clock mechanism. The thickness of this washer is just less than 1/8", allowing just enough thread through the clock face for the front nut to thread on to. There is no on off switch, so if you need accuracy to the second, timing when installing the battery is the only way to achieve that. The movement of the second hand is smooth and continuous, with no jerky ticking motion. Though I rated accuracy at 4 stars, the clock has only been running for twenty hours, but so far, so good

I wanted a quiet clock. All these small battery operated ones typically come with the tick tick motor. It's annoying in a quiet room. I got this non-ticking one in hopes that it would be quiet. It is! Very quiet. You can only hear a hum and you need the clock mechanism next to your ear to hear it. In operation on the the wall you hear nothing. I did not install the second hand as I only want hours and minutes showing. So far it works fine and is accurate. I'll be ordering several more of these for other wall clocks that I have. Great buy.

My clock was difficult compared to many. It had a square stamped box meant to contain the clock motor. I removed it and installed the clock motor. This is working fine.The clockworks seem to be higher quality than many on new clocks.

I have purchased and installed these quartz clockworks in clocks I made and clocks I repaired for over 40 years. I have quartz clockworks in clocks in my house that are over 40 years old that work fine. I bought those clockworks from Klockit and they were manufactured in America at that time. This one I bought at Amazon worked until just outside of the return period. Then, it would stop and start; losing time on a regular basis. I began checking the alkaline battery for power but no problem was noted. I replaced the battery with a new one. No improvement. This week the movement just stopped working altogether before it was 4 months old. I am very disappointed and give my strongest recommendation to others to not buy this unit..

Needed to replace the ticker. Works great!

I have two old 1960s "Standard" school clocks that are 13" in diameter with questionable motors that I wanted to revive. This may cause purists to go bananas but I've messed with keeping old clocks stock in the past and at this point I just want it to work.Two huge bonus points for modifying is not needing to run a power cord down the wall and the clock is now silent.NOTE: I wanted to keep the old hands and did a custom epoxy job to hands from the kit. This is asking a lot of this clock motor to handle the extra weight of the additional material, but the ad claims heavy duty so far it keeps perfect time.Your results may vary if trying this modification.Very satisfied customer.

Used to replace mechanism in favorite clock at the cabin.

Sin problemas para instalarlo. Le dio nueva vida a nuestro reloj de pared. Excelente inversión. Han pasado 3 meses hasta este momento y funciona muy bien, silencioso y preciso.

Para reparar un reloj antiguo

Bien emballé et tres silencieux. Reste a voir si lheure vas etre bonne .

Excelente opción si tienes un reloj que ya no funciona, muy fácil de instalar de hecho lo único complicado de todo el proceso es quitarle las manecillas a tu viejo reloj en caso de que quieras reutilizarlas. Otra ventaja que tiene es que su funcionamiento es silencioso.