Nilight 2PCS 42W Flush Mount LED Light Pods Spot Flood Combo Backup Reverse Driving Headlamp Mount on Bumper Grille for 4x4 Offroad Truck SUV

All good but for the Time test! I bought these as a replacement for another light brand I previously installed and it broke a seal . These look better and are hands down brighter and built very solid. The other brand lasted about 9 months, lets see how long these hold up. Boy are they brighter. Nice units.

What a great buy, these things are stupid bright and the combo flood spot setup makes them hugely useful. Driving in snow recently they light up the road like daylight.

Great back up lights for those dark Alaskan winters. Word to the wise, look behind the bumper BEFORE laying out the great template they send with the lights (or you get to plug the hole with a plate and try again like me). These lights are certainly bright, a lot less "flood" than expected, they project a good beam.

These are bright, but much more of a scattered flood than I was hoping for there's not much focus if any for the light beam. I have other nitlight lights on another truck they are a little smaller and have a more focused beam to them. Install is straight forward and difficult do to my choice of 1/4" diamondplate on my homemade bumper should be easy on anything else just make sure you aren't planning on cutting the holes with a 4.5" grinder there's no room for the corners to cover any overcut. So I started with grinder ended with Sawzall. They look nice very low profile now I just need to figure out how to keep them from lighting up the sky and keep them a bit more tamed toward the ground. This is not a defect just a flood light with a very impressive spread more than my personal preference

I installed these on front and rear of an old mower and they're working well, quite bright. They seem well-built, of decent quality, have large heat sinks to keep them cool. I'll see how long they last over time.

Originally bought these for my plow truck, but never got around to installing them. We bought a 36’ diesel pusher RV and had a two week long cross country trip coming up not long after buying it. Knowing I’d be in dark areas and unfamiliar territory, I felt it was necessary to upgrade the junk factory reverse lights by adding these. They look great, don’t flicker, and are very bright at night! So far they still work great with no moisture or water intrusion even after multiple washes and 5200 miles of driving. Came with everything needed to get them installed on the bumper, but did not include any wiring or switches to get the power to them. Great price though and I’ll be buying more for my other vehicles! So far I’ve had zero issues with any of the NiLight products I’ve purchased

Ordered these Nilight Flush Mount LED Light Pods 2PCS 6 Inch 39W Upgraded Spot Flood Combo Beam Driving Work. Have had a set of LED Nilights on an older jeep for several years and like how well they have held up along with a Nilight wiring harness. Put these new ones on an older lawn mower that I had rescued. Had to make a set of bezel headlight frames to get the right fit and totally happy with finally results. Nice quality and what was expected.

Wasn't too sure about these when I saw them online. I was expecting something cheaply made and something that felt equally cheap in my hand. I was pleasantly surprised when I opened the box and unpacked the contents. Everything was well packaged and nothing was scratched or damaged. The lights are heavy gauge metal body construction and are very sturdily built. I wouldn't recommend using the cardboard template though. U installed the first one without using it and everything came out good. Using the template, the holes were off a little and had to be bored out a little larger in order to get the bolt through the hole. Just slide the light through the cutout you make then mark the mounting holes and drill - perfect fit. I can't wait to see the difference these things make. As you can see in the picture, the bag contains bolts, buts and washers. It also contains an allen wrench to tighten the bolts. I could barely tell when my factory reverse lamps came on. After installing these lamps, I can clearly see when I am backing up. I get great illumination at least 50 feet behind my truck now; more than enough to safely back up without worry. I hope to get a long life of use from these, but if I were still deciding on which set to buy, I'd choose these. As I was installing them, a neighbor came by and said they looked great on the truck and that they didn't look aftermarket or out of place at all. All-in-all I would say the install is fairly easy with minimal "mechanical knowledge" required. Tools required: 4 1/2" grinder to cut through the bumper, needle nose vice grips, marker, drill with bit. On a 1 (easy) to 10 (hard) scale I'd give the install procedure a 2. The last picture shows the lights on. You can see the OEM reverse lights under the tail lights Huge difference. ******UPDATE****** About a week after installing the lights, I noticed one light was not working. I have not figured out yet what the problem is. I was thinking it was shorting out but that doesn't seem to be the problem. If I tap the back of the light, it will turn on (as long as it is suppose to be on). Now I am thinking it is defective.

Se sienten bien aúno los instalo pero se ve de buenos materiales después actualizo la reseña

Bright lights easy to install

Purchased to install as auxiliary back up lights on my truck. Very happy with them, very bright, nice clean white light. More of a spot than a flood, but really nice lights. Not sure on reliability yet, but seem like pretty decent quality foe the price.

Straight forward installation in flush mount Trailfx rear off-road bumper for additional lighting while in reverse. Very bright and perfect if you are looking for a reverse lighting solution that blends right into a flush mount installation. Splice into reverse light wiring to turn on when in reverse and off in Park/Drive/Neutral.

broke after less than a year.. i am unable to claim warranty because i could not find their contact ..order it if you know their contact only