Aquafaucet Tall Bathroom Sink Vessel Faucet Lavatory Mixer Tap Chrome Lavatory Faucets

Would have been nice if I didn't have to uninstall it, fix it and reinstall it. The spout is a separate piece that is held on by a couple OD Allen set screws from underneath. Upon installation it leaked badly at the junction. I uninstalled it and pulled the spout off. There are two o-rings on a tube that projects into the spout. They weren't damaged and ere lubricated. I relubricated them with food grade silicon grease and reinstalled the spout. I was pretty concerned that the set screws we're going in too far without biting into anything but they eventually caught. Reinstalled it and it is no longer leaking. Threading the supply lines into the facet was pretty dicey too. They just thread the ends of copper tubes which are buried inside the faucet. Be VERY careful you don't cross thread or over tighten them. The curve in the supply lines adds to the challenge. I had to hold the faucet between my knees and use both hands to hold the line straight while threading. There is absolutely no way to get a wrench on the fittings...but I just used the hose to apply enough torque. No instructions at all by the way and nothing on the box. Looks just like the Chinese faucet I replaced ( i knowingly bought it from directly from China) which after a few years developed a leaky supply line at a crimp. I couldn't get a line from a hardware store (they do sell them on Amazon) and when I tried to re thread one of the old hoses into the threaded copper tube on the old faucet it broke the tube. I probably should return the new one and find a better constructed unit as I am confident I will be replacing it within five years. I looked at an Aquafaucet at a big box store of similar design for $120 and $45 I though it worth a shot. It is perhaps worth $45....but it may be pushing it.UPDATE 27 Dec 19 - It's probably dead in 4.5 years not 5. It is leaking down the supply line from inside. It has also corroded already so if I have to take it apart anyways I might as well just replace it.

We had to apply stop leak product to sink. Leaked from the package. Looks nice though

This faucet leaked EVERYWHERE. The handle, the downspout, the hoses all leaked. In addition, the set screws that attach the downspout to the riser part were stripped from the factory so I couldn't even try to address the leaking issues. Definitely would not recommend.

Works quite well which I was kinda of surprised considering I was inexpensive. Looks stylish. Price was right compared to Home Depot or Lowes.

Looks great but it leaks. I just now got around to installing it and cannot return. I would not recommend.

Perfect!