LANSCOERY Acrylic Display Case for Vehicle Models, 9.8x5.9x7.9 in

Very pretty. Does not hold together very well. Upon putting it together will need glue to keep secure.

So i read some reviews that concerned me and almost did not buy this item.#1 plastic covers hard to remove, but after purchasing i found there is a tiny plastic coin that help remove that plastic from the acrylic sheets, if 1 corner does not work try a different location the coin helped but make sure you remove the protective plastic from the coin first.# 2 that had me concerned was, hard to assemble the prongs do not fit corectly. So i found my self in some difficult moments where a second pair of hands would have been welcome, however it all fit without force just needed to move the frame back and forth and make sure it was in all the hole fixtures at the same time, a thin blade also helped with the prongs in the middle of the longer sides.I built mine standing with the bottom on the back so i used a glue gun with clear glue to hold the sides together i am sure clear silicone would have been better but i used what i had on hand.i am extremely pleased with this display, it took me about 1 hour to build, i left it in a way i can remove the black panel when i need, but i would prefer never have to open this again lol.My only complaint is the price, if this was not for an item signed by stan lee i would never spend this kind of money over $60, however if the price was at least 50% lower i would buy these for all my collectibles.

These are attractive and nice for the price, also great that they come in different measurements. I have had five of them. This is the only one that cracked. I think maybe the pieces were extra tight or something. I’ve not had this happen before. But I just ordered another one and will just replace those panels. It takes a while to peel the protective film off them. But be careful not to scratch it- use the round piece they enclose. It’s a really clever and sleek design. The only problem is once it’s put it’s not super fast to open and move things around, there’s no door you have to remove a panel and then lock into the adjacent ones like jigsaw pieces.

It looked flimsy in the photos, because of the way it fits together, but it is very nice. Use the round piece of piece of acrylic to remove the plastic film. I didn't read the instructions so I had a heck of a time getting the film off. My fault.

Cheap and nasty Chinese junk that is dishonestly represented - it's not a box but a flat pack of crappy plastic sides that cips together and is not solid. If you pick up the box later - especially if you forget how nasily it was made - it will likely disintegrate in your hands and break what's inside. And whan I say "cheap and nasty", it isn't actually cheap - I found a proper solid display box for $12 that is ten times better.

The first case I ordered was damaged during shipment, which is no way shape or form the fault of this seller. I reached about it and they were quick to respond, asked for my address and sent me a new case ASAP. The contents that come with the case are professionally laid out, and the instructions are extremely easy. I really love the LED lighting that comes with it too. It's very long so you can literally hang it around your collectible shelf if you don't wish to use it in the case itself.Thank you so much!

I liked the concept; however, it is fragile and if to much pressure is applied this will snap. I didn't think that I was applying to much force to gently snap it together and I broke the plexi in 2 places. Very cheaply made. Look for something better.

The plastic film was a little tricky to peel off at first. It’s easy to assemble. I wasn’t expecting 2 stands of lights to be included, so that was a very pleasant surprise when opening the box.

Good brand, no scratch and perfect size.

I have ordered a couple of other display cases from Amazon, all of which were fine, but this one is the nicest quality. Other reviewers have commented that it does not snap together and can fall open if you move it or touch it. I think you would have to give it quite a jolt for it to fall apart and since it's meant to sit in place and display items, I have to wonder why you would be moving it anyway? I'm really happy with it.

A nice product

I am so impressed how nice is look any kind of Ithem that we want to show or enjoy every day ..I just love the black base that is my Favorite ...THANSK TO THE PROVEEDOR FOR THIS SPECIAL SHOW CASE DISPLAY¡¡¡

La finition laisse vraiment à désirer. À comparer aux autres présentoirs, celui-ci semble être de qualité inférieure en raison de angles qui dépassent et des joints avec encavures. En revanche, le format est idéal pour des articles hauts et minces.