KATSU Tools Two Jaw Gear Bearing Puller Extractor Ultra Thin Claws 3" 75mm | Carbon Steel, Mini 2 Arms Special Thin Claws, Car Engine Repair Belt Pulley Wheel Removal Tool, Model 450461

I had to remove this stuck inner bearing ring to replace with a new one and no amount of WD-40 or beating would loosen it. At first I had ordered a 3 jaw puller from another manufacturer but it turned out too thick for my use case. Luckily I found this one, with its thin jaws made it very easy to grip given the small amount of space I had. After getting a firm grip, I had to use a spanner wrench on the hexagonal nut as the supplied rod wouldn’t budge the bearing ring. Ultimately, it’s good value for money and extremely strong and well made. Another useful tool for my garage.

I needed to remove the wiper arms on a Skoda Superb, having removed dozens of arms over the years I never need a puller before, but these they were particularly stubborn. So I bought a puller (locally) designed specifically for wiper arm removal, it bent (pressed steel design jaw opened) and the arm did not budge. Oh well I thought, I can do better, so I whipped out the welder and fabricated my own puller using 50mm angle with a 5mm wall and an M12 nut and bolt. Appling more torque then I was really happy with to the bolt, and the 5mm thick wall on my homespun puller bent - and the arm still didn't budge. Left it alone for a few days and got this puller from amazon, result? Absolutely, both arms off within 10 minutes of opening the box :-) A neat little pullers which will remain a welcome addition alongside my regular bulkier, heavy duty ones. If I would make any criticism it would be that the ball inserts to retain the legs on the cross slide use detent springs that are so weak as to render the balls useless. They provide zero resistance or holding ability for the legs, but really it’s of no consequence and does not affect the pullers use in any way - Highly recommended.

It's a bit fiddly to use but it works once you've got the hang of it. The point is too wide for really small bearings, but I just use a M3 bolt placed in the centre of the bearing and the head of the bolt under the pointed tip of the puller and it works fine. Easy to take off bearings etc once you get the hang of it, the quality is great and reasonably priced. Would reccomend.

Nice little bit of kit! I purchased the 3 inch option to remove some stubborn window wiper arms, it worked really well, removal was simple. Got them off in a heartbeat. I had very little room around my cowl so I slid it around from the opposite side. Great value for money when you compare it with the other options available on the market that seems to bend easily. This is pretty sturdy and the bar to turn the screw is made from decent metal. No doubt I'll end up using this for a bearing or two in the future, so a useful tool to have in the box.

Not high quality. If the bearing or sprocket is a tight resistance fit then this isn't up to the job. Threaded rod just collapsed and destroyed thread in cross bar when under high load and I had to throw it away. Maybe my expectations were unrealistic at this price point.

Destroyed my vice trying to get a bearing off, this thing did the job perfectly, got the largest size for more wiggle room, highly recommend, super simple to use and held up to the task

I needed to remove two 1' diameter small bearings off an electric motor shaft and didn't want to spend lots on a tool I would use once. Well this tool couldn't even be used once as the prongs won't stay aligned on the bearing and when you torque down on it they slide off the bearing. So basically it is a bearing non-puller and cause scratches and cursing tool. As I had used it in this brief capacity I don't think I can return it. This is definitely a new brand of Japanese motorcycle, a "SackaKakki". Steer well clear.

Brilliant bit of kit very well made excellent quality. I purchased this to remove some very stuck wiper arms on my car the narrow arms fitted underneath and with its wide range of width adjustment i managed to line up the puller perfectly. A few turns eventually the arms came off.i honestly dont think I colud have managed without it I fully recommend this product

You get what you pay for; a wobbly assembly. Do not think you can really put a strain on what you want to remove, the whole thing will flex away.

The steel is of poor quality. I bent the tool using it twice. Would not recommend.

Buono abbastanza maneggevole,ben fatto.

Très bon

Qualitee 10sur10,et beacoup d'utilitee sur moteur et roulement .Tres content moi👍👍