Question 1

is this food safe?

Accepted Answer

The technical answer is our products are not food-safe. Although we are currently working on getting our epoxies tested and certified for food-safe uses. All our products are as safe as epoxy can be for food contact but are not FDA compliant as they don’t offer this approval anymore to any products containing BPA. To put this into perspective, there’s less BPA’s in our products once cured than what’s in plastic drinking bottles but it does have a small percentage that is worth keeping in mind. It’s safe for incidental food contact but not recommended for anything where an alcoholic beverage or anything that can be a solvent is introduced.

My advice would be to use them without worry about anything that dry food is going to be placed on (apples, meats, cheese, etc..) but if there’s something like a beverage or a wet food such as a sliced orange or similar product then I’d avoid that.

You can also coat it with a food-safe oil or wax, you can also use a polyurethane finish which won't wear as fast as an oil or wax finish will. but you have to allow it to fully cure before it is considered food-safe, The rule of thumb for full curing is 30 days at room temperature (65- to 75- degrees F).  then you can be 100% worry-free with your project.

Question 2

does it yellow over time?

Accepted Answer

I haven’t had it long enough but I really don’t think so only thing like that I came across was I made a huge bar top in kinda a dusty basement so my last laying was a little foggy

Question 3

what is the mixing ratio?

Accepted Answer

2 parts resin, 1 part hardener. By volume. The 60L kits includes 40L of resin and 20L of hardener.

Question 4

Is it better to use liquid or powder tint with flowcast when pouring a river type table?

Accepted Answer

That's a good question. Both have merits. In our shop, we personally prefer metallic powders from EcoPoxy due to the depth of figure that transpires during the cure and the ability to create a wide range of shades by mixing various powdered pigments. Powders allow more freedom to adjust the degree of transparency that you are seeking as well. Metallic powders also reflect light, again giving more interest in the final product.

Liquids are relatively easy to work with, but there is less variety in the liquid pigments for color and they tend have a higher opacity (e.g. less see-through) final product. They don't give you the same "swirl" effect that metallic powders due in the final cure. That can be a positive, depending on the end result you're looking for. They blend well into the resin/hardener mix and have less risk of pigment clusters, which sometimes occur with pigment powders (though that tends to be negligible and not usually an aesthetic issue).

Both work well, and it's a matter of preference.

Powders = generally more variety in color and transparency options and more figure/swirl in the finished product. Liquids = consistency, easier to achieve opacity (no transparency) and less figure and swirl if that is what you desire.

ASIN	B0829T7Y5D
Best Sellers Rank	#54,185 in Arts, Crafts & Sewing ( See Top 100 in Arts, Crafts & Sewing ) #471 in Sculpture Molding & Casting Products
Brand Name	EcoPoxy
Color	Water Clear – UV / Yellowing Resistant
Compatible Material	Wood / Wood Slabs, Metallic / Mica Pigments, Various Fillers
Container Type	Can
Customer Reviews	4.6 4.6 out of 5 stars (913)
Full Cure Time	7-14 Days
Item Form	Two Component Epoxy: Resin (A) & Hardener (B) - 2:1 mix ratio
Item Package Quantity	1
Item Weight	1 Pounds
Manufacturer	EcoPoxy Inc.
Material Type	Deep Pour Epoxy Resin: Low Viscosity, Bio-Based
Model	FlowCast 1.59 Gal / 6L - EPFLK10-6L
Other Special Features of the Product	Water Clear, Bubble Free, Warp / Crack Resistant Casting
Part Number	EPFLK10-6L
Specific Uses For Product	River / Ocean Tables, Furniture, Dioramas, Flower Preservation, Resin Lamps, Resin Art
UPC	628199906677
Unit Count	202.8841 Fluid Ounces
Viscosity Level	Low
Volume	202.88 Fluid Ounces
Water Resistance Level	Water Resistant

EcoPoxy FlowCast Deep Pour Epoxy Resin Kit - 1.59 Gal / 6L: UV/Yellowing Resistant, Bio-Based Resin | Water Clear Epoxy for River/Ocean Tables and Other Deep Casting Bubble Free Epoxy Projects

Details

Details

Description

Specifications

Common Questions