SE 30-inch Telescoping Magnetic Pick-Up Tool, Extendable Magnetic Wand Pickup Tool for Mechanics, Household, Office & Industry, Stainless Steel, Black Handle

I have had a Craftsman magnetic wand for years and thought it was about time to order a couple more to keep in my car. They are very handy when you lose steel screws, washer, etc in the grass or driveway. These are slightly different in design than my original, but still good quality and the magnet is now stronger though a little larger.

nice and strong

Christmas gift, great buy. I will go ahead and buy a couple more of these. Nice find

I bought 2 of these, one for myself & another as a stocking stuffer. I tested mine out a couple times & so far it works for what I need. It has a pretty strong magnet on the end. It opened my refrigerator door when I stuck it on there :-). The magnet isnt very strong around the side; which is probably a good thing if you are trying to get at something in a highly metallic area. You may still want to wrap something around the sides of the magnet if you're trying to get something from under the stove or any other tight spot as it may still get stuck to the metal from the sides. This has a fairly large end on it, maybe an inch or more, so keep that in mind as you won't be able to use it if the space is more narrow than that. I haven't tested it out in anything close to the 15lb weight limit, but my refrigerator door test suggested to me the magnet was pretty strong while the telescoped handle seemed durable. Hope this helps!

I think every tool box, tool bag, and maybe on your person should have a tape measure, a telescoping magnet. a Sharpie, and a flashlight; but that's just me. I'm not as young as I used to be, and you get the picture. I hate wallowing around like a beached Orca, just to get up to get something that easily could have been close by. I got this as an add-on item, and am pleased with it. The more I use it, the more I appreciate it. I thought it would be comparable to the ones within the price range at the parts house or hardware store; but it is better. I look at those when I'm at the store and now I think they are crap. This has a better feel in the hand, and is much sturdier than those that I have seen and touched. The telescoping is a bit stiff and I expected that stiffness to loosen up with use. It hasn't so far, and now that stiffness is one of the things I appreciate about it. You extend it X inches, and for the most part it stays extended X inches. Do notice in the item description it has a 15 lb. PULL capacity, not lift capacity. I haven't done any Myth Busters testing, but it will pull that brake caliper from over there to right here. It is good for passing parts or nuts and bolts when my son is working in a wheel well, and I'm supervising from over here. As far as lifting capacity, I don't know what it would be rated at. I have picked up some heavier things and lifted in the horizontal and it stressed my wrist more than it stressed the telescoping tubing. My son's went missing, and I thought I'd get a couple more before mine went missing too. He needs one for his work truck and also for his garage. I almost went with the 2-fer offer (notice the "Size" radio button in the listing), but then among the recommendations was also a slim Tekton one, and there is also a bundle offer of one of this SE, and one of the slim Tekton. One of each equals more versatility. So that is the current order preference for me. SIZE: This is about an 1-1/3" in diameter. It's not in the item description, but is in the specs tab. You will notice many round items from China or Taiwan listing by circumference instead of diameter. I do not think I have met a single person who wouldn't use diameter. It is bizarre to me, but might just be a cultural thing. (Excel spreadsheets will offer to plot a "radar chart" and the Japanese love them and think they are intuitive. I look at a radar chart and see an incomprehensible spider web.) This is about 7" in length when collapsed. Fits well in corner of front or hip pocket of jeans. MATERIAL: Like I said earlier, the grip feels good in the hand. some texture for traction, and a Goldilocks amount of cushion. The shafting is stainless, but I do not know the alloy. It has not flash rusted, so it is not 400-series. (400 has good strength, but it has enough free ferric in it that it rusts and it is still called stainless. Go figure.) The magnet is set in the knurled sheath, and it has gotten some good whacks and is still seated fine. - - - SE and TEKTON brands: For the most part, I have been satisfied with these brands. If you are of a certain age, the phrases "Made in China" or "Made in Taiwan" causes some hesitation due to quality issues from the past, or if you want to buy American. Good reasons. However, you'll be hard pressed to find this at anything near this price point that is wholly sourced from the US; and also anything short of Critical Service, like an oil refinery or gas cracking plant, or a rotary tool's SOLOOP branded saw blade mandrel*, should be okay with Chinese or Taiwanese metals. [* see my other review about that unfortunate little purchase. It could have gone very bad. I should have read through all the reviews.] I do have an unrelated ding against Tekton. their deep well 1/4" drive sockets do not have a recess in the receiver end to accept the detent ball that most socket extensions have, including their own extensions. Odd omission on their part; but hey, if you use those you'll want a telescoping magnetic retrieval tool to go find that socket!

In recent months, each of us here have lamented about the different things that fall behind washers, dryers or any of the other hard to move pieces of furniture and end up with a Real Rube Goldberg retriever. Sona Enterprises provided a relief from some of those lamentations. From its comfortable handle to its 30-inch telescoping magnet, I can retrieve almost anything made of steel. When I need to pull in a non-metallic item such as a glove or hat, I rigged a barb-less fishhook to dangle from a 3 foot piece of monofilament attached to the end of the Sona. A few seconds of fishing and here comes the big one. I cannot stand single purpose items and constantly seek alternative uses for them. I recently had to measure the inside dimensions of a box and I use Sona. When expanding the tool, I get a quality measurement that does not change because the two ends are kept in place by the amount of friction used in the telescope. I can easily take the measurement to the point of cutting and get 'er done. On occasion the attached magnet is just not strong enough. An added rare earth magnet is and is a great addition. A fairly large hunting knife found a nice hiding place under a Hoosier cabinet and refused to permit the attached magnet to do its job. The addition of a rare earth magnet worked beautifully.

I work with a lot of small parts in my hobbies. This magnet is very useful for retrieving them when they get adrift, especially if in some hard to get to place like under my workbench. You don't even need to see the parts to retrieve them. Just extend the wand, move it about where you think the part is, and often it will be retrieved without further problem. Very useful! I don't believe anyone is gong to be picking up 15 pounds with this magnet, it's not designed for that. However, it's plenty strong for hobby use, and will lift a standard hammer, and at least three pounds, see pictures. It will lift lots of parts, but you will likely break the wand if you regularly try to lift heavy things. I received a similar tool years ago as a gift and it was very useful. However, I didn't take good care of it and the wand sections began to stick together, eventually pulling apart. If I had occasionally wiped a bit of WD-40 or some persistent lubricant like Break Free CLP on the wand, no doubt it would still be working fine. I highly recommend that if you buy this or any similar telescoping tool, you keep the wand lubricated. I kept the head of the old tool, still with plenty of magnetism, to hold small parts while working on this or that. That has an advantage of slightly magnetizing the parts, and then they will then hold on the end of a screwdriver making them easier to work with. In summary, this is a very useful little tool. If used with its design abilities (don't try to lift 15 pounds!) and occasionally lubricated, it will last a long time.

Bought this almost as an afterthought with another order and now it's honestly one of the most grabbed tools in my box. Dropped a bolt way down inside my engine bay and this thing fished it out in about 10 seconds flat without me having to take anything apart. The telescoping part stays extended without sliding back in on itself which is something I've had issues with cheaper versions of this same tool.

Since I can't seem to hold onto screws this tool is great. can be difficult to navigate around engine area but with perseverance comes success.

ممتاز جدا والمغناطيس قوي

Great product, especially for the price. I use those for picking up nails and screws that I drop around the garage or in the grass after projects. Works perfectly like a magnet should. Only downside is that the fave of the magnet is a little bit small. It still gets the job done, picking up at least 7 to 10 small nails, but it would be nice to have a bit bigger of a surface. But, for the price, and the fact that you get two of them, these are a no brainer.

Works very well as expected. Compact, has a good weight to it, magnet is strong, telescopes well nothing feels loose, good build quality and the handle feels good in the hand. Will come in handy when I drop a bolt or a socket in my engine bay. Highly recommend, very useful gadget to have around.

Sencillamente es un accesorio que no debe faltar en tu caja de herramientas, sumamente práctico a la hora de recoger tornillos o llaves que cayeron por un espacio reducido.