NEIKO 40464A Cordless LED Work Light, Multipurpose Portable Light with 350 Lumens, 5 Hours of Run Time, and 4,000-mAh Rechargeable Li-Ion Battery

I can't imagine living without this! Feels & operates like a tool that would be much more expensive. Two brightness levels, multiple ways to position the light for different applications, including a magnetic clamp & a detachable hook similar to the swivel hanging hook on the top. The power switch is a high quality rocker switch that's in a protected inset in the bottom of the handle with the charging port. I would like there to be a 6 Star Category for SUPERIOR Products like this 💚

Update June 5th 2018, have used extensively since Jan 24 2017 and up'd from 4-5 stars, still holds charge for at least 4+ hours, probably longer, I use it extensively for auto repair, that led cover is constantly banging against engine components with no worry. I stand it on its base on my garage floor and have knocked it over countless times right on led cover, no issues. Last light you will ever own, Id never buy a "flashlight" again. I initially complained it didn't seem so bright on my engine in daytime, dumb complaint and removed it , this may be best auto light out there as Its thin and I can weave it into tight spots in engine bay. This really is an incredibly well made product, you don't see that very often today as nearly all mfg's are priced concerned much more than quality concerned, however this is an an example of " If you build it they will come". Brightness. Wow! My first test was up in my master bedroom at night. I stood near one corner point this away from me, Its 27x35 with 16 foot ceilings, this lit it up completely and lit up the 16x18 bathroom through its open door as well. I pointed it up to the ceiling and it light the room up well. Extensively used for auto work on 4 cars, It lights up the engine well and I dont have to worry about shattering glass going into my intake manifolds, certainly puts out alot of bright light unlike my 6 inch reflective enclosure and way hot bulb you cant take that under the car and hang it in tough places, like I could with this light. The led's are also high quality, you may find a brighter light but you won't get the time of operation due to cheap LED's sucking major power, these are not cheap led's, super bright and stays COOL. Manufacture Quality. Gets an A+ I'm a hardware engineer, this is high quality. The on/off rocker switch is at the bottom if you look at the picture show when its standing up on its own. A super high quality rocker switch that will easily last your life time, I know because I spec this same style in products I design. Rather than going "disco" and putting a USB style charge connector on it, it has a heavy duty barrel type interface made of hard steel with a nut securing it to the base. A USB interface would be a poor choice despite the marketing appeal of using "USB" but as far as life time and reliability and ability to carry a large charging current USB falls far short, a sturdy barrel type connector is entirely the proper choice here. The handle is covered with heavy duty "rubber" for lack of a proper name for the material, very thick, has ridges for grip and 2 - 6 point socket style molded ridges , one near the bottom by power interface and power switch and one near where the leds starts to keep it from rolling when you lace it down. The leds are to bright to look at and its great that half the led length tube is blocked out so light only goes one way otherwise you'd be blinded. It may have been better to make that inner surface silver reflective, but I doubt it matters much. I haven't dropped it yet but it seems the most critical component which is the clear cover over the leds seems pretty solid and not a very brittle like material which would easily fracture. Accessories. The top hook will swivel 360 degrees but you should grab it down where it actually connects to the top of the light, the 360 swivel is tight which is good so it doesn't move on you but if you try to rotate it 360 by holding onto the hook you will probably eventually warp or break the top hook. The top hook also can rotate and fold down along the body if you want it out of the way and that rotational directing is very easy. The hook itself has flex in it which is good, you don't want stiff plastic that will brittle fracture. The second hook clips on the handles any where you want it to and I found this great to hang the light horizontally as I had freedom to place that 2nd hook to exact position needed. The magnet is same type of clip where you like it, its very strong, no worry about it not holding to metal like many other cheap magnetic hold products I've seen. Only thing is you cant clip it such that you can make the light stand up, the magnet will always be 90 degrees to the light. The charger has red led when charging , green when done, you will see an label "LED1" on a horizontal led at bottom of led tube near the handle, this comes on when your charge gets low, some other reviewer said he wished it had a warning feature and this is it. Other Stuff: Some ask if it will get "dim" as battery discharges. No it won't, led's do not work that way, they are basically on or off when proper minimum voltage is present. Warning. Do not try to charge this with other barrel type chargers, this charger has a low voltage about 4.4 v and it needs to be what ever it says on the charger to avoid your battery blowing up. One question asked was " Can you replace the batteries". This is not made to easily replace the batteries that are used internally. But to me, it seems like the rubber handle that makes up the bottom half of this light was slid on to probably a plastic frame during manufacturing.MY guess is you can slide this off, of course that will be very hard. Best thing would be to heat it up slowly so it becomes more flexible then work it off, maybe spray some WD-40 down the slides as it becomes flexible. You can also just cut it and band-it back together. But I suspect it doesn't matter, this will probably last a long time and you will more than get you money's worth. Mad Scientist Engineer's like me do this type of thing. Definitely buy, don't try to save 10$ on a cheaper unit, this is the real deal.

Sooo.. First off, this is a review on the NEIKO 40464A Cordless LED Work Light that is rated for 350 lumens. I don't know if I missed something somewhere, but the light I received came with paperwork that claimed to have a High and Low mode rated for 1000/500 lumens? Which appears to be more accurate than the advertised listing lol. This light is very bright, (like shockingly bright) and definitely has 2 light settings. I picked the "350 lumen" work light because I like the size, style and simple on/off switch. I really don't like lights with a bunch of buttons/modes and overly complicated operation. Just wanted on and off lol. But turns out, this light has a high/low setting. Its a simple rocker switch that you press once for high and again for low. This was actually a pleasant surprise, because the low setting alone is brighter than I was ever expecting the light to be in the first place.. It's awesome The light feels solid. The back of the light housing is metal. The hook/hangers work well. The magnet is more than strong enough for what I have used. On high setting, the light runs continuously for nearly 2.5 hours before the battery dies. I have not tested how long low setting will last. I would imagine a fair bit longer.. It will get a little warm when running for longer periods, but not hot by any means. Overall, the light is way better than I could have imagined. My expectations were definitely exceeded lol. Its cheap, solid and super bright.. I have zero issues or complaints. I have ordered 2 more The flashlight has been well used at the time of review.

A decent work light that will last for several hours on a charge. Pros- +Does not get hot. +No glass to break if it is dropped. +Included magnetic attachment allows it to be stuck to any metal surface with enough force to hold its weight but still easy to get off. +Lasts several hours on a charge. +LEDs stay full brightness throughout a battery charge. Does not dim as battery drains. CONS- -The battery is not easy replaceable, if at all. Overall a decent work light. I don't have two holes that line up with the two end hooks but the magnet held it just fine. Not super bright for a work light but it will put decent light on the engine area when attached to the hood. Battery powered allows it to double as a very bright flashlight so that is good. What is not so good is when the battery eventually wears out there is no easy way to replace it. When the battery does go I will cut into the rubber handle and see if I can get at it but a user accessible battery compartment would have been better. If I can get 5+ years out of the battery I will consider it a decent trade off. If the battery dies in less than that I won't be happy with it. Time, and a future edit to this review, will tell if my review bumps up to a 5 or down to a 2.

Very bright. Love it.

El material es bueno y su iluminación también. Vamos a usarla por un tiempo a ver cómo es su desempeño con el tiempo. Calidad precio bueno.

Light works well. Full brightness until batteries dies. Very decent battery life. Well built and durable. Note: no brightness adjustment.

Nice and bright Good battery life

Me gustó mucho voy a pedir otra

Solo le agregaría más lumens si tienen oportunidad compren el de 700 a 1000 lumens para taller o traer en el coche