Junction Box for Dome IP Cameras, RLA-JBL1

I was doubtful whether to buy these as 4 came in at over £100 where a similar Chinese counter part was around £50. All I can say is I'm glad I did, I bought a NVR and 4 reolink 12mp cameras and these made it so simple to waterproof the connection. The Ethernet cable supplied by reolink fit through the cable glands so no need the cut and reconnect.They are a bit fiddly and what I've realized is you can install the camera on the ground, then install the back plate above with Ethernet cable.Then connect camera and screw the front plate to the back plate. If that makes sense?Reolinks own supplied Ethernet cables appear to be about 6mm.Inside the box is instructions, find which set of letters fit your camera and align on the front plate.Anyway basically these boxes will make your life easy, the install looks nice, tidy and without a doubt durable. They are really well built and I can trust they will keep the connection waterproof for well, basically ever.

It’s perfect

Great fit on the cameras. Has plenty of hole options. Feels water tight! It is very functional junction box!

Good quality box.Paired with a RLC-1240A (B pattern on box).Very close to edge screws to fix to backbox but the can br tightened with a smaller driver.Water tight and good seals provided for back entry to box or bottom entry.Best to use right box else you'll find water ingress over a period - also put silica sachet in to help keep it dry.Would recommend and about right on price for quality.

As you’d expect it fits well for my RLC-1224A.The quality is good, made out of sturdy powder coated alloy.My main issue with the product is surrounding the grommets.Firstly, if your cable is entering the housing via the rear port you aren’t given a grommet to seal that hole. While the gland will screw into the M22 thread there is obviously no space for the gland to sit due to its size. It would have been nice to have a second grommet specifically for this configuration.Secondly, the grommet on the front hole (the one the camera tail comes through) is too big for the cable, the seal is obviously poor. I expect that I’ll need to add thickness to the cable with some tape to ensure it keeps water out. Given it’s a compression grommet you’d have thought they have undersized the hole.I’ve seen reviews mentioning the sticker on the front of the box, this can just be removed (though the unused mounting holes are still visible)The box comes with;- the box itself- 2x M22x1.5 blank grommets (with o ring seal)- 1x M22 cable gland- 1x cable grommet- 1x set of wall mounting screws with wall anchors. The screws each have an o-ring to seal the hole.- 1x short set of screws to mount the camera to the box (with o-ring)- 1x long set of screws to mount camera to the box- hole drilling guide- instructions

The quality is very good but the price too high,

Genuine Reolink part. Not available at the moment direct from Reolink so very pleased to find these.

it is well built and this year’s version has more holes yet it still does not support some cameras. Like 840a - how can you get a mount which does not support all new cameras coming out. Makes no sense. There is a leaflet to indicate which holes for which cameras. I understands if you can get a different junction box like b10. But no.

De prime abord, on se dit que c'est cher pour une boîte de dérivation... Mais la qualité est au top. Le boîtier est en aluminium ce qui le rend insensible a la rouille extérieur. On peut placer la caméra facilement, et il est fourni avec un gabarit pour le placer... Gabarit qui est même autocollant et c'est top ! Il y a largement la place dans la boîte pour y faire loger le raccordement étanche, avec du rab de câble... Dans un boîtier étanche. Enfin pas étanche sois l'eau, mais au ruissellement, etc... Mais tout ce qu'on demande puisque mettre une caméra sous la pluie... Bref. Même l'arrière du boîtier et recouvert une mousse plastique étanche, et qui aide très bien a maintenir le boîtier en place sur n'importe quelle surface pendant le montage... C'est vraiment un produit bien travaillé et on sent la recherche derrière. J'avais fait le test avec un boîtier et une caméra reolink et j'en suis pas déçu ! Il équipe maintenant toutes mes caméras alimentées en PoE, depuis plus de 3 ans maintenant pour les premières. Au top !

L'articolo è molto buono, in metallo e massiccio. Peccato per il prezzo non popolare ma avendolo in mano capisco

This Reolink Junction Box RLA-JBL1 is an excellent addition to Reolink cameras. The combination looks very professional and provides a clean and secure installation.It helps protect cable connections from weather and keeps the installation neat, while also making the camera mounting more stable. The build quality is very good and it fits perfectly with compatible Reolink models.A highly recommended accessory for anyone installing Reolink cameras and looking for a clean, reliable, and professional setup.

High quality, nice design.

Passade perfekt till min Reolink RLC-833A.Inga problem att montera. Får dock inte 5 stjärnor pga det höga priset.