Spray Upper Engine Cleaner and Lube, SS14, 12 oz, Pack of 2

I'm rewriting this review weeks after my first use of SeaFoam. My first review was about the smoke, the car running smoother, etc, etc... The normal stuff. As of now, this product has done so much for both our cars... I see alot of debate online about its' effectiveness. People either love SeaFoam or consider it "snake oil". They also criticize saying the smoke is actually the product burning off, not carbon. To the smoke part, I say what difference does it make? We have two high-mileage cars. A 2009 Jeep LIberty with 143,000 miles and a 2013 Kia Forte with 94,000. The Jeep has had its' Check Engine light on for almost a year - P0430 code, "Cat Inefficiency, Bank 2." The timing chains and guides have been replaced along with the Thermal Intake Sensor (what Jeep calls the MASS Airflow Sensor), MAP Sensor, and EGR valve. The car has been through alot, running very rich for years as we worked out problems and I lived near the ocean for a long time so I began to accept the Catalytic Coverter was history from abuse and salt. I did run CatAClean through (not cheap), cleared the code repeatedly and the Check Engine light just came back on. I tried Techroline (and others), and SeaFoam in the gas tank, same thing. Two shops handed me $2,200 estimates for an entire Catalytic Converter Y-pipe because the second cat was sure to be next. I've also been told all along that the Jeep's motor looks all carboned up on a scope. I ran this product in the intake, did the whole hot soak and smoke thing, cleared the codes, and the Check Engine light has stayed off for weeks! It never stayed off for more than a day before; returning the moment the car got hot. No more P0430 code for the first time in almost a year and I've driving the hell out of it!!! I wasn't even trying this for this problem, I just wanted the idle to smooth out... this was an unintended consequence and is saving us $2,000 because had the light stayed on, I was going to have to replace the cats just to SMOG It. I couldn't even sell it if I wanted to. Now the KIA... we've had problems with the car pinging LOUD on hard acceleration. I hadn't tried much to remedy it but it was getting very bad. I figured I'd deal with it at the 100K tune up. But because of the experience with the Jeep, I ran this in the KIA's intake and let it hot soak for fifteen minutes - really out of curiosity. When we started it back up, there was no smoke - NONE. For miles nothing and it was still pinging! Then all of a sudden on the freeway accelerating, the car kind of paused for a second (which scared me a little) and suddenly started blowing blue smoke out the back - making it difficult to even see the car behind. It gradually recovered and the pinging was completely gone. It idles so quiet now I have to keep checking it is actually running. Just like everyone, I've wasted so much money on miracle cures hoping to luck out. It never happens. Honestly, I've run a lot of regular SeaFoam in the gas tank and it never seemed to do anything. (although I just ran it in the oil and yes it really helped). But this product is really great. Chrysler sells something identical (for $40 a can) and the guys at Valvoline said they have theirs too. It seems safe for the car as long as you keep it away from your MASS Airflow Sensor. I probably won't use it on the Kia again for a very long time but I'm going to incorporate this into my normal 30,000 mile tuneups on the Jeep. I think many of the people who consider this "snake oil" are people who had more serious issues the than product could help with, or never had any problems at all and expected there to be something spectacular. What I've seen are very real, tangible, quantifiable results and a major repair bill narrowly avoided.

tldr; This stuff works. No more rough idle for my rx8. Be aware your car may smoke for more than anyone online tells you(I was told 10 minutes, and mine smoked for 3 days LMAO). And it will smoke HARD for AT LEAST 10 minutes. It will be hard to see. Do it outside with plenty of ventilation. Follow directions online for YOUR SPECIFIC MAKE AND MODEL! People will point out the smoke, "hey did you know your car is smoking?!" Yes. Yes I know. I daily a Mazda Rx8, the infamous "unreliable" rotary powered Japanese sports car. When I first got the car, it had power issues, and would frequently turn off in the middle of intersections. Took it to the shop, and surprisingly, there were no compression issues. The issue was a failed catalytic converter. Well, after replacing the cat, the thing ran like new. However, there were some rough idles occasionally. After a few hundred miles after the repairs, the idle got worse. I was told by a guy that used to race these things that a failed cat can cause back pressure that can then cause excess carbon buildup. He said to "seafoam it". Following the directions for my specific make and model, it took about 4 hours (only 20 minutes of prep) to let my car soak before starting it up again. Man, DID IT SMOKE!! The car had never been seafoam before, I doubt, so it continued to smoke even after 30 minutes of idling with me revving it to 6k about 20 times, and driving for 15 minutes, hard. I began to panick, however with some research and advice from seafoam themselves, a car may continue to smoke for days of driving, and not to panic. All in all, my car runs amazingly. It feels more responsive, it NEVER idles rough. Highly recommend.

I was skeptical about trying it but after all the great reviews I had to try it and boy I’m glad I did. Got this because I had a po420 code on my 20 year old van. It’s a beater and I’m not trying to buy cats for it just to pass state inspection. Just like the youtube guys did I sprayed this into the o2 sensor hole. Won’t get into the story about removing it but it was rough. Anyway sprayed the Seafoam in there and let it sit for a few hours. Half of it ended up on the driveway because of a rotted section of exhaust but whatever. Started it up and it smoked like crazy for about 15-20 minutes. Looked like them LA takeovers on my block lol. As soon as I drove it I could immediately notice a difference. Wasn’t the dog it’s been last few years. I’ve filled up with 2 tanks of gas so far and the light hasn’t come back on yet. This is even with half the can ending up on the driveway! My son’s car now has the code so I’ll be doing this on his car next. Absolutely great product I tell everyone that has an old beater with the light on to try this. What do you got to loose?

Excellent quality and service thank you 👍

I've admittedly been very skeptical of Seafoam, especially because of the "spectacular" white smoke - which really isn't the result of dirt burning off but rather caused by one of the chemicals in the product burning off. I'm also not a fan of most fuel system "cleaners" you're supposed to put in your tank and wouldn't recommend using Seafoam, B12 etc. in the tank for that purpose. What I've seen happen is that those can rather loosen dirt but then plug up the very fine mesh filters on your injectors. Generally Techron is pretty good but changing your fuel filter & getting the injectors properly rebuilt is really the way to go if you want to clean your fuel system. Can be had for as little as $11 or $12 a piece online with a before & after flow bench testing and report. So why did I buy this version of Seafoam? During pretty extensive 100K mile inspection & maintenance work on my BMW V8, I noticed carbon buildup in the cylinders closest to the crank case ventilation valve - which can introduce oily fumes back into the intake for improved emissions. After seeing the ChrisFix' video on YouTube about this particular version - (SS14 is introduced into the air intake) I decided to give it a try and having done a before & after inspection of my combustion chambers through the spark plug holes with a borescope I can confirm this stuff definitely works - actually a lot better than in Chris' video. The carbon buildup in my cylinders 3,4,7 & 8 was a lot heavier before but after, about 2/3 of the piston top were shiny & clean. I believe what makes this product work really well are the oils. I found oils in some cases to be a better detergent of carbon deposits in different applications than "cleaners" or gasoline. It seems to mix & bond well allowing for easy removal.

I'm skeptical about putting "cleaners" in my engines. At the last oil change, the dealership told my wife they recommended a throttle body cleaning and they have her an estimate to do it. The only thing we get at the dealer is the oil changed because I can't even buy the oil for what they charge. I looked up throttle body cleaning to see what I had to do, and came across Sea Foam. At first I was like, yeah, for $10 I'll be able to get done what they would do at a shop or dealership. Then my wife told me they explained to her at the dealership what they do. It was the same process that was described in the instructions of the Sea Foam. So it sounded like it might be the same thing they do at the dealership, so I decided to give it a try. I was adding a cold air induction, so I had to take the intake apart anyway. I followed the instructions on the can. Had my wife help keep the throttle up at recommended RPMs while I sprayed the Sea Foam into the throttle body. Let it sit for 10 minutes in the "hot soak". Started it up and started driving, slowly at first, then took to the interstate. As I entered the on ramp and merged, I throttled down to join traffic. As I did so, a huge grey cloud shot out of the exhaust. This stuff works! Before using Sea Foam, throttle wasn't very responsive, gas mileage was declining, and now, after using the Sea Foam, throttle response in restored, I haven't had enough time to see an increase in mileage yet (I just did this last night). But I was so excited with how this worked, I had to write a review. Use this stuff, it works

For German cars this is THE good stuff. I was getting rough idle and crappy performance on my vw New beetle. Before the treatment I took a look through the spark plug holes and the pistons were BLACK with buildup. After infusing this through the intake and letting it hot soak I got a huge vape show through the exhaust. Even My neighbor, who is quite passionate with his vaping, jokingly asked what vape juice my bug was using. I took a look through the spark plug holes again after the treatment and DAMN! there was still a little bit of buildup here and there I’m not going to lie, but I could see the shiny piston crowns. This stuff does it’s job! I got my mileage back and the car felt like I had taken a huge weight of its shoulders. One small thing though. I am being nit picky here, the process of spraying this through the intake is very long upwards of 8 minutes and holding the spray button for that long kind of hurt. Better get some gloves to protect your hands. Also, I don’t know if it was because my car had a lot of buildup, but the engine shook and vibrated like crazy while I was spraying it in. Even after raising the rpms to 3000. But hey, kind of like a cancër patient getting an infusion, the process is not pleasant at all but the end result is worth it 100%

I had done everything I knew of, including using carburetor cleaner, to get my small lawnmower engine to start up and stay running. I was about ready to give up when I read about this Sea Foam on a forum. Since it was inexpensive, I tried it as a last resort. The instructions say the engine needs to be hot for it to work, but since I couldn't start my lawnmower, I was skeptical. I sprayed some Sea foam deep into the carburetor using the provided nozzle, and managed to get it to start for a few seconds. I was then able to get it to start for a couple of seconds, then sprayed more Sea Foam in at 0.5-1 second intervals to keep it going. After a couple of minutes the engine was able to then run on its own. I waited for it to get hot, then followed the rest of the instructions on the can - a hot blast and then turn off the engine for 10 minutes. The engine started up just fine after 10 minutes, then I ran it for 15 minutes and mowed the lawn without issues. After that I turned it off until the next day, and it struck up fine the next day by itself too. 10/10 would buy again. Update 2019-04-16: While it helped, my mower is back out of business. Time for a lawnmower repair shop...

Incredibile come cambia una vecchia automobile dopo l'utilizzo di questo prodotto, sia nell'olio motore (prima del tagliando) sia nella benzina. FANTASTICO!!!!

Does exactly what it says on the tin.

Glaubenssache....für mich das Beste...

Certainly did everything I hoped it would do, wished I'd kept my eye on the elbow piece to help with keeping the hose around the throttle body hose, it snapped while installation and I only got to use about two thirds of the product. It did however do what it is supposed to do, it cleared out so much build up in my recently purchased 16 year old land rover V8. The amount of smoke and foul smelling gasses that flowed out of the exhaust pipe was alarming. I had to find an unused corner of a factory car park to do the job as per instructions. The run on the local bypass caused alarm for many of the other drivers I'm sure, and for a few days afterwards it would smoke even after getting up to temperature. And the smell is quite awful so try not to have your heater blowers on when at a junction waiting in traffic. The immediate effects were a noticeable acceleration performance, the faster start on ignition, the noticeable holding of temperature without any peaks and troughs between idle and high load. I inspected the spark plugs before and after the treatment and the condition of the cylinder chambers were noticeably shinning more than before and by changing the sparks for new, the noticeable misfire it had before has gone. All in all, it has reduced the fumes, increased the performance of the spark and a believe, been part of a thorough service that has increased the efficiency of this old engine. I'm seeing an increase in fuel economy, a smoother ride, a lot less of a visible wobble at idle and after a combination of other essential jobs (oil, filters, MAF, sparks, belt, coolant and new exhaust / O2 sensors) it's feeling like a new car. I'd suggest using SeaFoam on an old engine that has limited or very poor history, but do it away from your neighbours. The results are awfully antisocial.

Gran producto. El mejor que he probado.