T101AO 5 pc. 3-1/4 in. 20 TPI Clean for Wood T-Shank Jig Saw Blades

These blades reduce tear-outs vs blades with fewer teeth

Very good blades.

I make backdrops for parties and when I am cutting a prop, I usually use this blade because it cuts pretty clean and has hardly any tearout. The blade is durable and does not break easily. I would recommend going slow on rounded cuts as it can damage the blade, but this is my go to blade for my jigsaw.

This is a fantastic blade for very clean fine cuts! I used this blade to cut a large 3ft tall MN profile planked with hardwood flooring, with a 1/2" plywood backing. This blade did a wonderful job! The cut was very clean and had little to no splintering. Just make sure to go slow! If pushed too hard it will break. I did break one blade because I was pushing too hard....so just slow and steady and it will do a great job!

they fit

This is my favorite blade for al around wood sawing. Long enough to cut through a 2x4, teeth fine enough for cutting 1/8" material, blade narrow enough to make tight turns.

I "discovered" the value of a 20 tpi jig saw blade years ago. These blades are a s good as any name brand. They are perfect for cutting plywood. Like any other jig saw blade, just don't get in a hurry because you can break the blade and it isn't the fault of the manufacture, just the user.

Good scrolling blade. I tried using it on 3/4 ply and that's really to thick for this blade. If cutting 1/2 or thinner it should do well. The smaller width really make tight turns easier to cut.