NR200P V2

This case is awesome and cheaper than its main competitor the NCase m2 and others. Great features for cable management and accepts most air coolers. I have a D12L in mine and the temps are great with having vented side panels that snap in easily. Comes with dust filters and top I/O.

Seriously one of the best ITX cases you can buy for the money. If you don't care about RGB puke and just need a great looking, SFF case for your hardware but dont want to spend $200 on a Fractal case (with worse airflow), then this case is for you. Fits my full sized 9070XT and 6 120MM fans. GPU temps under full load are UNDER 60°!! That is INSANE for a SFF case. CPU temps stay under 70° under sustained full load. I cannot recommend this case enough. Its such a breathe of fresh air to have a company not put a ridiculous markup on a product just because its SFF.

Really easy to build in. Lots of space while still being a small form factor case. The metal chassis is sturdy and the weight is not to heavy. I love the minimalistic look and how little space it takes on my desk.

Review is for Black, standard version of the NR200 SFF (no riser cable, no windowed side panel) I was looking for a compact case with room to run a long 3 fan 2070 card. This case worked nicely, was easy to build in, and had some decent cable management options built in (like little tie tabs along the framework of the case to tie off to, and velcro straps under the PSU). Other thoughtful features are there are two positions for the PSU bracket, if you are using a standard SFX, or an SFX-L. The side and front covers come off without tools, but they're nice and tight until you're ready to pop them off. The top and bottom covers come off easily as well, but are secured with one screw each. The only conflict I ran into with this case is I used an NZXT Kraken X63 280mm AIO cooler -(RL-KRX63-01) and the radiator doesn't actually fit inside the side mounted radiator bracket. The bracket bolt pattern allows for 280MM radiators, but the top and bottom edges of the bracket are bent at 90 degree angles and the resulting opening is slightly smaller than the Kracken 280 radiator's top to bottom dimension. I had to spread the bracket's folded sheetmetal edges back a bit on the top and bottom to squeeze the cooler in place, the solution was not elegant, but it allowed the cooler to fit. This 280 cooler also barely fit with-wise within the opening of the case's frame, but it worked so long as the cooling lines were positioned to be on the hing side of the bracket (and not the side that the bracket bolts to the case-frame). Biggest negative for me was the thinner sheetmetal where the motherboard actually bolts into, the tray has a nice big cutout on the back to access cooler backplates, but the but the thinness of the metal, plus the big opening makes the motherboard tray flex more than any other case I can remember building in. Not a deal breaker, and shouldn't make a difference once the machine is assembled, but I thought it was worth mentioning. Also, the case is pretty heavy for it's size. I was planning to buy one of the windowed versions of this case as well, but they sold out early. My build (general purpose & moderate gaming): Asrock Z390M-ITX/ac motherboard Intel i5-9600K CPU Crucial Ballistix Sport LT 3200 MHz DDR4 RAM Mushkin Pilot – 2TB PCIe NVMe EVGA Supernova PSU 123-GM-0650-Y1 NZXT Kraken X63 280mm - RL-KRX63-01 Zotac RTX 2070 AMP ZT-T20700B-10P I'm running 2 thin 120mm x 15mm bottom fans blowing up/in, and one thick 120mm fan in the top cover blowing up/out CPU is overclocked to 4.8GHZ, GPU is overclocked slightly (MSI Afterburner's "Curve" maxes out around 2280 core speed), The case has good airflow, so far thermals when gaming have been: CPU Max 72 degrees (@125w draw) GPU Max 64 degrees (GPU @99%)

I purchased this case when it was on sale for a mini ITX PC build that I wanted to do. I got this case because it was the best version of the NR200 despite being a few years old. Overall, I enjoyed building in this case. All of the provided components, such as panels, screws, motherboard connections, and fans, were all quality. The case layout was well thought out, specifically the location of the power supply. Being able to take apart the frame of the case is very convenient and helpful and is a feature I wish more cases had. Also, there is a part of the frame under the side panel that you can mount fans to. This is something that I have not seen a lot (have not done too many mini ITX builds), but was a nice feature. On the side panels, there is a magnetic mesh cover that you can remove too, another great feature. There are a few things I don't like. The first issue is the location of the power cable extension. Because the power supply is mounted near the front of the case, there is an extension of the power cable to the back of the case. The problem that I have is the location of this extension makes it nearly impossible to secure the motherboard in the top left corner using the screw. Furthermore, the extension cable is also nearly impossible to remove in order to actually secure the screw. Another problem I have is the lack of cable management options. I know it is a small case, but there are very few places to cable manage at all. This isn't a problem for me, but it is something to consider - there are no USB C ports on the case, likely because it is older. I liked the case, I liked building in it and what it offered. There are a few problems for me, but I would absolutely build in this again and would recommend to interested buyers.

I love the look of this case. It fits a triple fan rx 7800xt GPU with room to spare. Cable management room is a little tight, but it can be done. I recommend running extra power cables around the power supply cage. I also like the way the SSD attaches inside the front panel. The back of the motherboard is accessible, so it is easy to get to any m.2 slots you may have on the back of the motherboard. Plenty of ventilation all around the case and screens that can be removed to easily clean the dust. Everything runs nice and cool and quietly inside this case.

Great case. It had space for everything I wanted

Its fairly easy to build in it and there’s a fee good places for cable management. It’s parts seem high quality and overall seems sturdy. An RTX3070 fits great and has just about enough room at the bottom (underneath the gpu) for 2 slim fans.

تركيبه سهل لانك تقدر تفك كل شيء وصل من الصين بحالة ممتازة راكب عليه مروحة 92 وفي مروحة 120موجودة تركب كبس بدون براغي مع شبك حماية وفي شبك حماية أضافي اذا بتشتري مروحة اخرى

I would say this case is a work of science and art. Easy to install and lots of room to DIY. One downside for my order is that the power button is soft and flimsy. If I press it down sometimes it doesn’t pop back up. And I have to press down the top panel with a little force for it to return to original position. 10/10 nonetheless

Great case with good airflow. CPU cooler has to be nothing bigger than 55mm or the side panel will not close. Arrived as an assembled frame and easy to set up and install all components