Spigen Neo Hybrid EX Designed for Google Nexus 6P Case (2015) - Gunmetal

As of this writing, I currently find the Spigen Nexus 6P case to be adequate. I am not in love with it - as it is a piece of molded silica plastic and thereby incapable of love - however - I do find it to be adequate at protecting the rear of the Nexus 6p aluminum, frosted white case. Oh man...frosting...got to have...oh wait - There are not one...but two...yes two strips of faux carbon fiber to show off a little bling bling for your ring ring to flaunt your good taste to the uninformed individuals who may see you using your Nexus 6p. They will obviously say or think to themselves - oh...my ...god...look at that super expensive strip of carbon fiber attached to the back of that Nexus 6p...And is that the Spigen Rugged Armor case? I have got to go home immediately and drop this piece of trash iFone 17 into the sink garbage disposal and grind it into oblivion and order a Nexus 6p...Just so I can have that wonderful Rugged Armor case with attached carbon fiber strip. Just ask yourself - 'Who would turn down the possibility of not one, but two strips of faux carbon fiber on a Rugged Armor Case'? A crazy person - that's who.I would caution the more adventurous individuals before taking your Nexus 6P (which is...of course - equipped with a Spigen Rugged Armor Case) into a trans-dimensional rift - especially one which occurs randomly. You really never know just what will happen once you step into the random occurrence of a trans-dimensional rift. You could end up in some bizarre alternate reality where giant robots are locked in an eternal battle with genetically enhanced prairie dogs who ride fire breathing dairy cows. You just don't know what could happen - however - I am quite certain your Spigen Rugged Armor Case will protect the rear of your Nexus 6p from being scratched. Unless of course you happen to be roasted alive by a fire breathing bovine dairy cow or splatted into goo by an eleven thousand ton giant robot.How about some scenarios?"If my 6P were run over by a car, or a Cat D11t, or KHI 957z would it survive?"Not likely."Would adding the Spigen Rugged Armor case increase the likelihood of the 6p surviving a trip through a molecular disassembly beam?"Doubtful."Would the Spigen Rugged Armor Case provide any protection to my wonderful 6P should it take a direct hit from an Obliterator cannon?"It may provide .0000000082% dissipation of the particle annihilator effect before being deconstructed and phased into a matter energy tap."If I accidentally put the Spigen Rugged Armor equipped Nexus 6P Phone into a microwave oven on high for sixty three hours...Would it survive?"The microwave might survive, however it could overheat at some point during the sixty three hour period. The 6P and Rugged Armor Case may not survive, and may not operate as intended. I do not recommend anyone try this.In summary - you will like the Rugged Armor case.

Thought I would give this case for my Nexus 6p a try. It seemed to for pretty well and snuggly when I first attached it to my phone. It had a decent edge that sticks up past the screen to protect from face down drops. The clear plastic shell send to be capable of protecting the back side of the phone very well. It has a decent grippy feel to it as well. Later, after installing the case, I noticed that I want real happy with the positioning of the buttons on the car. I mean they live up ok, but I find myself constantly having to pull the dude if the car with the buttons up again the phone to properly realitn then with the actually buttons on the side of the phone. This is very irritating and there isn't much of a tactical feel too the buttons. I noticed today (2 weeks after installing) that the bottom of the case where the charger port is located in a big crack. I haven't dropped my phone or even been rough with it since installing this case. That big crack in the surround/border of the case and the difficulty aligning the buttons has made me dislike this case and I plan on purchasing a different brand. There's my review.

By far, one of the best camera cases that I have used on any phone. I previously had another Spigen case that was included with the phone from the previous owner, one of the clear cases that Spigen makes, the Spigen Ultra Hybrid case  Nexus 6P Case, Spigen [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Nexus 6P (2015) - Crystal Clear (SGP11796) The clear case fits perfectly and has all the proper cutouts. No fault on the quality, but what annoyed me was that the clear backing showed fingerprints/smudges/etc. Just looked dirty all the time (but that is just really an indication of how dirty cellphones are - google it if you don't have a weak stomach.The fit and finish of the Spigen line prompted me then to look for a replacement and I didn't have to stray far to find one. This case combines all the pluses of the other and has a very sharp looking black finish to it. Personally I'm not looking to show off the design aspects of the 6p, it's a phone, I just want something that hides the dirt and smudges that are prone to any phone better, this wins in all categories.The case is made of a softish plastic material that appears to be more than enough protection for your average drop that happens with any of our phones at some point. Material has a nice feel in hand and is not overly slippery. Fit is dead on with a snug fit to the phones body. You have to make a conscious effort to remove this case from your phone as it's not just going to pop off.Access to all of the major phone functions is perfect - fingerprint opening on the back/ speakers/noise canceling speaker on back/microphone/charger opening - 3 different types of USB-C cables I tried and there is no issue. I am awaiting on a stand mounted charger so have yet to have one to report how it fits with that.The power and volume rocker are both completely encased and extremely easy to find with your finger. I personally like that it offers a tiny bit more resistance to use both of those keys as it stops the accidental bumping of them while in your pocket or use that you can notice when the buttons are bare.The design of the case provides a faux carbon fiber finish at both the top and bottom. There is a slight lip around the back camera area and also on the front of the camera around the screen. Very nicely done and offers protection to the screen in the event you drop it. I find it hard to find an angle that would compromise the integrity on a drop.If for some reason I needed another case for this phone I would not hesitate to purchase the same thing again. Great fit, finish and looks. Well done!

I bought this case and I was not really expecting much due to the low price, however I have used Spigen cases in the past and the build quality and protection has always been excellent.The case arrived sooner than expected and I must say that amazon delivered this by courier even though I had only paid for standard Royal mail (thanks amazon).Now this case is a really great fit, cut outs are all perfect and aligned correctly, holds my Nexus 6P nice and snug and it looks great and feels premium as well.I am using a glass screen protector and my current case was causing the edges of the screen protector to lift at the bottom even though I had fitted it correctly, this case has resolved that issue. so I am very happy indeed :) This case makes the phone look like it is in stealth mode, it just looks really cool and macho...Highly recommend it!

Works perfectly. Just so happens that the day after I put the case on my phone, i drop it twice and there wasn't any damage at all. It looks very nice and professional. The grip has improved but it's like a smooth matt texture so it's not going to have a massive grip improvement like rubber would provide. It doesn't increase the phone's size by any considerable amount, don't worry about that. The phone also feels nicer to hold now but just my opinion. Definitely worth the money.One nit-pick which isn;t even anything worth mentioning to be honest, is the charger hole at the bottom of the case. It's not the smoothest cut, it can feel kind of sharp but nothing really uncomfortable. Though that'll only be recognisable if you happen to hold your phone in a way that your little finger overlies the charger slot. Still worth a 5* in my opinion

The case fits the phone quite well and it feels good. The case definitely adds a bit of grip comparing with a bare back, but only "a bit of". The cut is fairly precise although the fingerprint scanner cutout is slightly off-centre. Spaces left for the usb connection and earphone plug are comfortable. The covers for the side buttons are OK, but they shorten the pressing of the buttons, which I took some time to get used to, I still prefer the original pressing though. Ample space is also left on the front glass for a screen protector. In particular, I use ilover TGS.As for protecting the phone being damaged, I think it will work - that's said I haven't had the chance to see my phone dropping on the ground, but the material feels premium and will protect the phone in the case of a drop.

Have always bought a case for my smartphones and after browsing through a few options settled on this one. It's made out of a flexible strong plastic that snuggly fits around the phone. Cutaways for headphones, camera and fingerprint ready are great, no issues from me. Power button and volume controls are covered by the case rather than cutaways, which i thought might be an issue but never had any problems and always responsive.As careful as i try to be, i have dropped my phone and number of times and the case has always protected it. Not a single crack on the screen and i bought the phone in Nov. It does add a little bit of bulk to an already large phone, that is the norm with any case, but in my it protects the phone well and i'd much rather make that the priority!

I opted for this case after my previous 6P case broke. I've dropped my phone several times since and it's protected it well (and got a couple of scuffs in the process, but I can't fault the case for that.) It's not too heavy or bulky either, which is a bonus.I only have two minor issues. The first being that the power and volume buttons aren't exposed, and covered by buttons on the case, which seem quite sensitive to touch. This has sometimes lead to my phone turning off because the case has been pressing into the power button.Secondly, the case is a matte finish, which, if you have dry hands like me, can make your phone difficult to hold on to at times. Again, not a huge issue, but certainly worth bearing in mind if you hold your phone quite lightly.