WaterCop LeakStopPlus Single-Point Leak Detection, 1/2 In. (WCLSLFA12)

Description

WaterCop LeakStop .5 In. Single Point Detection and Automatic Shut-Off WCLSLF Single appliance LeakStop PLUS WaterCop system with 1/2 inch lead free valve detects water leaks and moisture accumulation at a single location :automatically shuts off the water supply. Recommended for appliances like water heaters. Two moisture sensor probes included to reduce or prevent water damage if a leak occurs. Hard wire the LeakStop PLUS unit to connect to third party devices via conduit at the unit's bottom. Notifications: light, buzzer, auto dialer device or security/automation system. Homeowners or maintenance personnel get immediate notification that the water valve is closed. Please note this unit does not operate with other WaterCop sensors. The WaterCop LeakStop Plus .5 inch Valve System: Designed for a plumbing supply line installation. Install upstream of the appliance or area you wish to monitor. Place the two sensor probes where water is most likely to accumulate if a leak occurs. Ideal for water heaters which are vulnerable to leaks sometimes within a few years of installation. Nearly 8-million homeowners replace failing water heaters each year. LeakStop PLUS Specifications: Max working pressure - 125PSIG Ambient temperature - 35 degrees to 105 degrees F. Voltage - 12VDC 1 phase (includes 115V wall transformer, 20 foot cord) Valve - Full port brass NSF61G 'Lead Free 1/2" NPT - 19 GPM (Gallons Per Minute) Sensor wires are each 10 ft. long Requires 110VAC power: power cord is 20 ft long. The WaterCop LeakStop .5 inch Valve System: Constantly monitors for accumulating moisture Valve remains closed until it has been manually reset .5 inch low lead brass valve. Manually open/close the valve with soft touch buttons on the actuator Made in USA