Rear Either Side Chrysler 8.25" Diff Chrkee/Durngo 5-Lug 29 Spl 29-13/16" Long

Nice good quality actually worked great and showed up in a quality box and good condition.

If you have a press and thickness gauge this is a great axle that comes with almost everything except the wheel studs. Don't be fooled that the studs are in the picture of both the Amazon listing and the Yukon website it does not come with them. Frustrating when you are getting everything ready to assemble and the vehicle is apart and you find no wheel studs but everything else is their including quality Timken bearing.

Fast courteous service, fast shipping, as described, Super deal, Thanks very much. Remember, these are cut to length shafts. A hacksaw blade won't even scratch these shafts. Used a lathe and a angle grinder with a sixteenth inch thick cut off wheel. Took an hour for each shaft but was polished and fit perfectly when done. These are reduced diameter 12 inches out from the flange which really really helps when you are converting a 30 spline D60 to accept the 35 spline shafts.

Bought both sides (975007 and 975008) for my 2009 F150, and neither fit. Contrary to the title for the product, these are for '04 to '08

Overall this is a top notch kit. Unfortunately, the package I received was damaged and was missing one bearing set. I reached out directly to Yukon and they were on point, and got me a replacement no questions asked within 2 days. The install was relatively easy, but the bearings did not come pressed onto the shafts. A visit to my local 4x4 shop and $50 later, I had the bearings pressed on and everything was assembled. Here's to making a ford 8.8 about as bulletproof as a dana 60!

Couldn't get wheel hub off old axle and damaged the threads hammering on it. Had to get new axle in a hurry so ordered these with 2 day shipping and they worked great! Install was easy, used a bearing press to push in u-joints and axles slid right in and are working great so far. Also love that they are chroemoly which are stronger than the original axle shafts. Highly recommend these!

I bought two of these and neither one of them have the Yukon sticker or whatever it is supposed to be on the end which is kind of a bummerBut the axles are I would say a third thicker than the originals and the splines also just seem to be cut with much more precision and this is also after comparing to my old axles to who knows how many miles are on them but for the money these axles seem to be pretty awesome I don’t see how somebody could break one with the diameter that they were in unless you’re using slicks in an incredibly monstrous engine

All I really needed was new seals to stop the differential fluid leaking. But by the time I bought the parts and had them pressed on the old axles, I would have spent nearly as much as buying these. They fit fine.. Make sure you order the correct wheel studs for your Jeep.Very happy with the result. Hope they don’t leak!