A-Premium Power Steering Pump, with Pulley & Bracket

Perfect part. I purchased this for my 2014 Nissan Maxima SV and it works perfectly. The quality seemed just as good as the OEM clutch and installation was relatively easy. I really couldn’t be happier with this part. The quality for what it cost is Really impressive. Just make sure you have a small gear puller if you are attempting to swap your clutch with the compressor in place. On the maxima theres not enough clearance for a full-size puller and the clutch was on their tight. The only other thing to note is that I had to add a shim over what was in the factory clutch. Luckily I had a small washer that was the right size but you might want to make sure you have some on hand just in case. They fit inside of the small splined section in the middle of the outer clutch plate if that makes sense. Mine had a regular thickness washer and very thin washer. I replaced the regular size washer with two slightly thicker ones and that seemed to do the trick. Before that the two clutch plates were rubbing on each other slightly.

Pump fit fine- install is a real pain in the a##!! (2013 maxima 3.5. Ended up pulling motor mount and raising engine to access top bolts- Took a few hours with a lift and two of us. So far so good!

Perfect fit works great.

Fits perfectly. After bleeding out the air, performed as expected. Whining pump replaced with this quiet, properly working pump. Real pain to replace but two bolts at back, one in front and two very hard to get to on top and it comes out pretty easy. Sure hope don't need the one year warranty. Price 1/2 auto part stores. Now 30,000 miles later still performing quietly with no issues. Everything I was hoping for so far.

Noisy

Note that pumps just like this offered by several sellers. You are better off buying the Hitachi OEM pump. You have been warned!!! Died after 1-month. Suspected it’d be an issue b/c pulley openings not correct (see images - common amongst “value” brand pumps), making it nearly early impossible to reinstall tensioner pulley. The sadists at Nissan made it hard, but stilldoable with normal tool. This pump needs custom tool to get at upper tensioner pulley bolt from side. The pump back bracket bushing waaaaay too thick to fit (see image). Bolts holding back bracket on have different size heads.

Installed on Jan 27, 2024. It was worth the conversations I had with Jesus. You'll need the patiences for sure on this one. Largest tools needed was 22mm & 24mm wrench. A car lift would have been nice too. Jack it as high as you can "SAFELY" get it all around. Also installed Power Steering Swith and Rack and Pinion. All working fine for now. Dealer wanted over $4,000. Saved me $3400 doing it myself. Bleeding the system took some time. Look it up on YT how to. Good Luck!

Appeared to be a good OE quality replacement however I could never find 2 of the 4 mounting bolts to remove the pump so I never installed it.

Worked out great great product an exact fit Thank you so much

It is exactly like the original in the original and has a difference of 92 percent out of 100.

La instalé en un Altima Coupé 3.5 V6 08 y trabajó muy bien, los materiales me parecen de buena calidad!

Perfect fitment for my 2010 Maxima

It replacement for my car,and working great