Cmple - 1 Port Cat5e Surface Mount Box, RJ45 Cat5 Single Port Surface Mount Box for Ethernet Cables, Screws and Double-

This single port mounting box worked perfectly for me. I couldn't believe this was not available at any of my local hardware stores. It was inexpensive and came quickly and was easy to install.

These break easily. I will add I’m using it for a cable TV outlet, so probably more stress than RJ-11 or Cat 6 cable. That said, I wouldn’t recommend for a jack that needs to be plugged and unplugged often. For my purpose, it works great as I will rarely need to handle it after installation. It looks better, more finished, than the cable just laying on the floor with a female to female connector between the wall and TV. Sticky pad seems to hold well, but I did drive screws in as well.

Need a ethernet jack in room on baseboards. This did the trick. Installed two connections for options in that office. Would recommend.

Has a "hybrid" punch down that is weird. I ended up not using it, I don't have anything bad to say about it. It looks and feels pretty sturdy, appears to be of decent quality.

The product is exactly what I was looking for and is working fine.

The plug came assembled so to use it, it had to be essentially broken apart (that is a locking pin had to be broken to get it open)! Then the plug pins did not line up correctly so it was useless.

They are about what I expected, not the easiest install but not bad considering. The look and fit is decent and they are staying in place well so worth it for me.

1. The good part: Unlike shown in the picture, the box contains a standard RJ45 punchdown keystone, not a punchdown into a circuit. 2. The difficult part: Box is made out a plastic that's not very hard and the tolerances of the lid and the bottom are so tight that in order to pry the cover off to get to the keystone, there seems to be no way to avoid damaging the plastic. It takes a screwdriver and and a lot of prying and pulling. Once the cover is open, however, it no longer stays shut very well, because the little tabs that held it in place didn't flex, they broke. I decided not to use this product, as I did not trust the workmanship enough to trust it with my CAT6 network wiring project.