Bioluz LED 10 Pack MR16 LED Bulb Dimmable 50W Halogen Replacement 3000K 7w 12V AC DC UL Listed High CRI

I've worked with a lot of LED bulbs over the years, trying to make my lighting designs as energy efficient as possible. It can be very hit or miss with these bulbs. However, I am very pleased with these bulbs. Their color is bright and white... they definitely look good and do a great job showing things in their natural color. THeir temperature is 3000K, and it is accurate. 2700K bulbs have a little more yellow tint to them. But I like the bright white of these lights. HOWEVER, if you have regular bulbs in the room, or other light sources, there will be a noticeable difference in color. These lights are brighter and cleaner and white than most home lighting. (After all, a tremendous effort was put into making LED bulbs not have that blue-ish tinge that makes them look weird). These bulbs are also aesthetically pleasing -- they are a nice design and look good. My application has the bare bulbs exposed in a cable lighting system. I thought of using shades over the bulbs, but I like the look of just the bulb in the fixture. Finally, DIMMING... the bane of so many LEDs. These dim beautifully and have a wide range of lighting levels. Color temperature stays constant when dimming. Also, there is no flickering in these bulbs... they don't randomly do strange things by flickering like many bulbs do. There is a slight flicker when dimming, but minimal and acceptable. For reference, I have these installed in a Tech Lighting Kabel lighting system with an electronic transformer, connected to a Lutron wifi enabled dimmer.

All 10 mini pin bulbs worked as they should. So much better than halogen. They are bright and illuminate at a much cooler temperature, increasing the life span of the bulb significantly.

I replaced 30 Phillips high intensity bulbs with these LEDs. They fit perfectly into the existing two pin sockets in my ceiling cans. The biggest challenge was pulling out the old bulbs as some were twenty years old and their pins were stuck in the sockets. A needlenose plier extracted them and I then inserted the new LED bulbs after cleaning the existing glass plates that sealed the old bulbs. The new LED bulbs seem a bit brighter than the old high intensity bulbs they replaced. Either that or it was just cleaning the glass plate of the accumulated dust and grime that makes the difference. I would say there there is somewhat more glare from the new LEDs as compared to the high intensity bulbs though it isn't unpleasant and the temperature balance is fine. The package says the LED buibs will last 23 years though I probably won't be around that long to find out.

Each bulb was well packed in an individual box and shipped in a compact carton of 10 bulbs. Everyone of the bulbs worked. None of the ten bulbs were defective. I installed all ten bulbs in recessed ceiling fixtures. Because these Bioluz bulbs have ribs around the bulb instead of the smooth glass of the halogen glass bulbs, they were a little tricky to install into the spring clamp that holds the bulb to the fixture. I was able to wrestle the bioluz lamp in place and by the tenth bulb, it was easy to do and they all fit fine and securely. The light from the bulb is cooler (whiter) than the halogens they replaced. I also thought the bioluz bulb was brighter. Still, I was happy with the result and loved the fact that I was spending a fraction of the energy cost after finally switching over to LEDs. I have almost all my fixtures on dimmer and yes, the bioluz bulbs dimmed and did not flicker at all from full brightness down to the lowest dimmed level. However, the lowest dimmed level of these bioluz bulbs are not as dim as the halogens. My wife complained that it was too bright at the lowest level and she wished the bulbs could go a bit lower. I agreed that the bulbs were not as dimmable, but I felt the low level dim was acceptable. I went with the Bioluz because after careful review, I felt that the quality would be better than some of the lest costly, off brands on the market. After these 10 bulbs, I felt I was correct and the higher price I paid was worth it. I am going to order twenty more bulbs to continue with my LED transition but I’m also going to experiment with a few cheaper bulbs to compare. (always searching for value) In closing, I don’t think you can go wrong with Bioluz. I recommend them.

We like these bulbs. They do go quite bright. We have a Lutron Homeworks system which we love and these bulbs dim nicely however will not go below around 15% otherwise they go out. Have purchased many with only one bad bulb out of the box and the manufacturer promptly sent me a new bulb. Nice service.

At roughly $5 each, these MR16 LEDs are an amazing value! I have compared these against 20 watt halogen bulbs, 50 watt halogen bulbs and Green Creative Titanium LED Series 4.0 LEDs. My contractor price at lighting unlimited is $16/each for Green Creative Titanium LED Series 4.0 (Green Creative 40759 - 7W - LED - MR16 - 3000K ). These $5 Bioluz MR16 LED have a better color tone and better spread than the Green Creative. The Green Creative is almost slightly white/pink where as the Bioluz is closer to a true white (not warm white). I am saving $100 per 10 lights and honestly think these Bioluz have the best look. I have attached a photo to show you the color and look. These photos are taken at night in a 30 x 30 room with 14' ceilings. The lights in the background are TCP LED8R20D27K Dimmable 8W Smooth R20 - 2700K R20 base bulbs in the 4" cans. I can also highly recommend the TCP 8W if you are looking for something just slightly brighter than a normal 45 watt incandescent in your R20 base fixtures.... You will see the 4" can lights in the background (The TCP LEDs) are more warm yellow. The Bioluz MR16s will be more of a white halogen look. Again. They are the best 50 watt equivalent MR16s I can find. I consider them to be better than a standard 50 watt halogen. Great value. In this one room, we are going from 11 lights x 50 watts (550 watts) to 11 lights x 7 watts (77 watts). I will post updates if the bulbs burn out or I have problems. I've spent hours swapping and comparing lights so please click the link below if this review helps you save time or money.

This is a superb LED light bulb with exceptional color and brightness. I replaced 50 halogen bulbs over the last 60 days, throughout the house and tested all in different dimmer setting using the Lutron HomeWorks home lighting controller. I did not experience any light flickering or issues as reported by other. The bulb is built very solidly. The color of 3,000 Kelvin is brighter than the halogen incandescent bulb. The lighting is now brighter than the GE EXZ 20835 50W MR16 with 25 degree angle. I have tested these bulbs over the last 60 days and did not have any malfunction. I am very pleased with the product and plan to purchase additional product from Bioluz Led.

Purchased as "Used – Like New." The packaging had clearly been opened previously and was heavily resealed with tape, although the bulbs themselves appeared to be in acceptable condition. My electrician installed most of the bulbs in recessed 10-foot ceilings, but we discovered that 2 of the 10 bulbs were defective and would not illuminate. The other 8 bulbs worked properly and produced good light. Because most of the bulbs had already been installed, returning the entire package was not practical. I also contacted the seller in hopes of resolving the issue but did not receive a response. Overall, the working bulbs perform well, but a 20% failure rate was disappointing.

Great price good quality

Easy to install and gives off the amount of light/brightness I was looking for.

Ruined my dimmer switch. I bought this as one of the few "dimmable" options out there, and the product I wanted wasn't available. They installed fine but did NOT get along well with my dimmer. On full power, the transformers in the light sockets were buzzing, and the lights were flickering. I took them right out and put back in the old bulbs but my dimmer was cooked. Glad I got them out before something more serious happened. I will buy a better brand next time!!

These LED lights seem to be a great replacement for our old pot lights. They don't dim quite as much but if you are replaceing all your old pot lights at the same time, this won't be a problem. If just replacing one in a set of lights, you will notice a difference in the level of brightness/dimness.

These bulbs have grooves, which I discovered means they're impossible to install in my recessed trims (which have a clip that expects a smooth surface). Product works if I connect it to power source, but entirely useless order to me as physically incompatible with socket. Make sure to check for this before ordering.