Cat6 Bold with Transparent Strain relief -50-50

I have been doing IT for about 20 years now and I can make some nice cramps, but with these ice cubes, I make pro cramps all the time! It takes some getting use to, but we'll worth it!

This is the kind you want to use if you make cables occasionally (make sure you have a cutting tool) If you make cables every day the blind end connectors are slightly cheaper... but not much. If you make a cable every week or two then these will be cheaper because you can make sure your wires are correct before you crimp saving the cost of the mistakes.

A must have if you do any type of custom Ethernet Cable runs. I've used this same brand for years at work. I must have made 1000s of cables. The only time the cable failed after testing was because the proper wiring sequence wasn't followed. It never failed because of the connector. The pass trough makes it so much more unproblematic to see that your wires are in the correct order, and if the wires are sticking out, it's long enough. Many fails from other types where the wires must bump up to the back wall inside. Multi-color boots make identifying cables easy and helps save the cable as well. Hint: Purchase a Pass Through RJ45 crimper as well, saves time trimming excess wire.

Easy to use. Work as described. Older crimper tool doesn't cut wires that pass through, so extra step to trim wires if without newer crimper.

I love the finished product once everything is terminated. They look and work great!

Bought these for CAT6 cable, and while the connectors are perfect, the boots are too tight to fit over the wire. I suppose I could hear the boots or use lubrication, and I may try that. But for now my cables are bootless.

Good value for the combination of the jacks and boots together. The pass through jacks work great, easy to pass through the heavier CAT6 cables and keep twisted closer to the jack. I’ve used on both solid and stranded cable, both worked good. Pass through is the way to go, though you do need a special crimper unless you want to manually trim the ends.

Is about every 3rd connector the pins would fallout. Overall not too bad have had worse. These are not good for using shielded cable a salmon withey solve them with the cable ends but they don't work with a thicker shielded cat 6A cable that they describe it as Is very unhappy would not purchase again

Aceptable para trabajos sencillos y buena resistencia.

Why had it taken so long to make them so easy to use

Bonne qualité de produit et facile à utiliser avec le bon outils pour connecteur passe-fils.

Nice pass-through 23awg connectors. The included strain relief works well and isn’t one of those rubber boots that harden over time making it impossible to remove the cable. Very happy with thesr

The ITBEBE 100/100 RJ45 Cat6/Cat6a Pass-Through Connectors for 23 AWG cables offer robust performance and reliability for high-speed network installations. Featuring a pass-through design, these connectors allow each conductor to extend through the tip of the connector for precise alignment and easy verification before crimping, resulting in faster, more accurate terminations with reduced errors. The 2-prong 8P8C design ensures a secure connection with standard RJ45 jacks, while the gold-plated contacts provide superior conductivity and resistance to corrosion, minimizing signal loss and ensuring optimal data transmission rates for Cat6 and Cat6a applications. Additionally, the strain relief boot protects the cable from bending and stress at the termination point, enhancing the longevity and reliability of the connection. With its focus on high-quality construction, ease of use, and reliable performance, this product is ideal for both professional and home network setups, delivering consistently strong connections for demanding application