Dynofit 3" Front Leveling Lift Kit for 2014-2026 Ram 2500 4WD, 2013-2026 Ram 3500 (4x4) Pick Up, Heavy Duty Steel Strut Spacers with Shock Extension Brackets

Great kit, put it right where I wanted it to sit. Great look easy install and Great price!

The leveling kit quality is fine, and once you figure out how to install it, it’s pretty easy, but the instructions are not clear at all! On the passenger side, you use the flag bolt through center of the spacer and the additional bolt to secure it, then put the spring back together. On the driver side, atleast on the 2021, you can’t use the flag bolt because the abs module is there, so you have to drill another hole and secure it with another bolt in the back (not supplied and make sure you don’t drill into the module). If you’re only securing with the one bolt because the instructions aren’t very good and don’t show the flag bolt, I would say you probably have a safety issue. We didn’t feel comfortable and did more research and found additional instructions from other kits. Once we got that figured out, the install took less than 30 minutes. If you have all your information this can easily be done in under an hour. Instructions seriously need to be redone… but for under $100 I guess you really can’t complain. Once installed the truck rode great, no issues at all even at highway speeds but had it aligned right away.

Fits an works great

Great product

So far so good! Great route to keep stock geometry.

Lift works exactly as it should. Word of advice. Make sure you have 2 jack stands and have the truck jacked up high to allow the front axle to drop way down. Remember if you barely have enough room to get the spring out, you will have to fight it to get it back in once you add the 2” spacer. It lifted my truck exactly 2” leveling it out. The back bolt on the drivers side can be a little tough to tighten due to no room. Specialty tools are not required but sure help

It works and gives you the 3 extra inches that you need however o notice when I tightened the driver side spring extention the top squere braket where the screw is holding bended significantly nor sure if that supposed to happen and instructions aren't the best, also the shok extention on the bottom side shrink as i was tightening not sure if a was supposed to use a torque wrench or something , the spring on the driver side looks diferent from the passenger side seems arched . Im gonna test at low speed but I don't feel like is supposed to look these way

I'm sure this was the most perfect thing I've bought so far for my truck , I really liked it and I'm happy with my 2021 ram 2500 I did this myself for the first time, following some YouTube videos, and it took me three hours.

These arrived in good time and well packed. There was clear instructions and they fit my Ram 2500 perfectly. It was an easy install maybe 3hrs but I am old now. Makes the truck look level now. Measures 5mm higher at rear. perfect.

Work great easy to install

Perfect