G&S Hypo Watch Crystal Cement

The description is spot on. I used this glue to add a date magnifier lens to my Timex Expedition watch. dried 100% clear. A tiny dot was easy to do with the micro tip this tube has for very precise glue application.

Use it like you would Super Glue. A better adhesive that is much less messy than Super Glue.

I have tried every glue under the sun as a professional jeweler and this is the only one that for the most part works. However, this glue is only good for gluing down your crimps, I wouldn't really suggest if for heavy duty adhesion, for when I've tried, it always fails. Thankfully, resin has helped me in that area. But the glue does NOT turn yellow when it dries like E-6000 glue does.My only complaint is with just how hard it is to put the cap back on. For one the pin that goes into the hole of the tube is so small it makes it almost impossible to get back in unless you look under a magnifying glass. Also, I find that even after cleaning off the tube end and firmly putting the cap in place, the next time I use it glue is built up all in the cap which is a huge waste. I also wish that it wasn't so dang expensive.

Sometimes difficult to recap

Good

Cement works better than superglue, no rush no bonded fingers. Does not fog up with residue and easy clean up. Glad to find this product, thank you.

I attached a sapphire cyclops to a sapphire crystal and let sit for about a day. I tested with a light blow to the side of the cyclops, and it popped right off. IMHO it's not trustworthy. I ended up attaching the cyclops with superglue. I tested that the same way and it did not come off. To remove the superglued cyclops, use acetone.

I like the consistency of this glue. It is not thin and runny, and it has a needle in the cap that fits inside the spout. I usually have to wipe a drop away when I get the needle in the tip of the tube but at least the cap does not glue itself on. I like it better than other epoxy products I have tried and use it on stretchy cord for bracelets and when gluing on findings on satin cord or inside bead tips.

J'ai acheté ce tube de colle pour remettre en place l'écran qui s'était décollé du châssis de la montre et qui ne tenait plus que par le câble électronique qui les unissait.C'est une montre intelligente de plus de 300$ et j'avais beaucoup de peine de devour m'en débarrasser. Le bijoutier l'a recollé avec leur colle spéciale pour bijoux, mais le problème est revenu au bout de quelques jours.En dernier recours, j'ai acheté cette colle sur Amazon et ça semble fonctionner à merveille pour ce besoin particulier.Ça fait environ 3 semaines que j'ai utilisé cette colle et ma montre est comme neuve.Espérons que ça va durer longtemps.Je recommande.

I needed to install a new watch crystal, this cement did the job. The thin needle applicator helped get just the right amount along the edges. The crystal is solidly in place with no chance of falling out. The watch looks like new again.

Happy with purchase, just difficult to recap

glue works well

Used it on my pocket watch glass works awesome worth it 💯