NuvoTP170 Parts Track, 12, Black

Works as expected. I'm happy.

On time. Great job

This live end cord is just ok, pretty average Chicom crap. The problem is the poor description. The length is never listed. The black one by the same manufacturer says it’s 15 ft so you would assume the white one is too..NOPE! 13ft 7in is all it has, approximately 1 foot shorter than I needed. Bought a 20 ft extension cord, measured, cut and replaced the cord in the unit, worked fine after that. Oh and since it’s never stated in e description either, it’s for H type track. Hope this helps some other intrepid DIYer out there! You’re welcome.

I think many have had the same problem I did--the track heads do not light if you do not install them properly, and the installation instructions fail to tell you that you need to hold the slip collar back before you place the head into the slot and keep it retracted until you have twisted the head 90 degrees to lock it in place. This is not very easy to do because the slip collar is hard to hold out of the track. If you do not retract the head, it will not make full contact with the copper power strip inside the track housing. Once I figured this out, I had no problems, but I got very frustrated before I did.Addendum: If you are using this with the Live End Cord Kit (plugging into a wall socket), insert it into the track with the steel metal prong on the side of the track with two copper strips. If you place it the other way, it won't fit. Another gap in the instructions... I suggest that you slide in the Cord Kit Before you attach the track to the ceiling.

This Novo TR120 four-foot, Halo-style track worked excellently for a track lighting installation. You'll need some kind of end power feed to attach to the end of the track. This will supply power to the strip. I purchased the  Nuvo TP169 conduit live end power feed , and it worked excellently. The TP169 snaps into the end of the TR120 and has wires in an enclosed area where Romex attaches.The Halo-style track has two contact ridges on one side of the channel and one on the other side. When inserting the light, you match the two contact side of the light to the two contact channel, then twist the light in place. If you install it in reverse, the light won't twist in place. It's probably not as easy to visualize through this description, but when you see it, it's easy to understand. Be sure to purchase a Halo-style light and you'll be all set. We purchased dimmable LED lights wired to a Lutron dimmer switch, and it made for a perfect installation!This product worked perfectly with our installation, so we have no problem recommending it to others.

The track head was practically falling out of the mono point socket. 2 stars because it did technically light up, but just buy the WAC version which provides an extremely secure fit.

Light connector works but is very flimsy, way overprice for the quality of the materials

I bought a track lighting set (lights, track etc.) from a big box store but wasn't ready to install it. When I finally did get around to installing it, I could not get the track to work. When I went to return it I found out it had been discontinued and I couldn't find a suitable replacement, so I took a chance and bought this compatible H track on Amazon. It was really easy to cut to the size I needed and worked perfectly. Is still working perfectly months later.

works fine, trap for young players on all the attachments for this rail, you can force them in backwards (none are keyed to make sure they go in the right way)

Poor quality but does the job

I find them a nice solution...wish they came with all the pieces...like power feed and light heads...

product came missing parts & broken.