PSP Go N5-KADW-ICGO LCD Screen Replacement with Backlight for Psp Go

The media could not be loaded. The PSP Go is becoming harder and harder to find these days. One in decent shape is around $150, boxed ones will cost you over $300. I had a PSP Go sitting around for a few years I picked up for $80 back when they weren't so expensive. The issue is that these get tossed around in drawers, pockets, backpacks, and the plastic lens that covers the LCD gets scratched so bad you can't see the game very well.For $20 this is a no-brainer solution. The disassembly is fairly easy and the whole process takes maybe an hour as there are tiny ribbon cables that can be a pain to reassemble. I recommend the following tools before starting.- Phillips #00 screwdriver- Plastic guitar pick- At least two spudgers with the tips bent at an angle- A rubber mat that can organize your screws- Plastic tweezersThe screen looks fantastic and I can't tell the difference from the original. If anything it looks a little better since it's brand new. I can't recommend this replacement enough.As for anyone mentioning that the screen "blows fuses". It's not the screen's fault. Either your PSP was already damaged or had an issue or you did the damage yourself. A screen with no backlight is either a bad LCD with a dead backlight (just an unfortunate dud) or something got short-circuited, or a ribbon cable became damaged or isn't connected properly. As long as you don't damage the tiny ribbon cables you should be good.Update: Bought another for a second PSP Go and no issues. Quality panels.

Works great! No issues what so ever. Looks really clear and nice, colors are decent. Looks better than my OEM screen but that one had tons of deep scratches. So this was awesome upgrade.

Bien

Replaced the original LCD on my psp GO and it looks just as good. The original one did have adhesive and this one didn’t but it didn’t really matter it stayed in place after screwing everything together and you can’t even tell it’s an off brand LCD

Looks to be exactly what the old one was.

Item came defective and would light up and display nothing when installed.Ordered a second one in hopes of the first one just being a dud.

I used this screen to replace the oem psp go screen and it worked. My only complaint was that the newly installed panel looked very different compared to the oem screen

Repair difficulty: Medium. There's a pretty good guide on ifixit. I had the ifixit toolkit so everything went pretty smooth. Lots of small ribbon cables to unplug and plug back in. Avoid the repair if you aren't comfortable with that.Looked slightly warmer than the original screen but I assume that is just a difference in batches. Very awesome to still be able to find screen replacements for an eleven year old console.