LINKUPPSU Cable Extension Sleeved Custom Mod GPU PC Power Supply Braided w/Comb Kit | 1x 24 P (20+4) | 1x 8 P (4+4) CPU | 2x 8 P (6+2) GPU set | 30CM 300MM - Black

Perfect... Item looks premium and it's stiff that can hold shapes and twist you prefer. Only the delivery from the courier is so disaster! Almost lost my package and no one can even track where it is.. And after 2hrs found in front of my flat. Front door. Without any confirmation from delivery guy.. Plus they confirmed on the tracking that customer received the package.. Worst delivery guy. Incompetent can lead to more problems in the future

Hi, As advertised its tested with different graphics card but they did not detailed what kind of test they have performed.I installed it, as far as normal display is concerned, it worked fine. As soon as i started CSGO (Game) session, display hanged after 2 minutes. Had to restart my PC, started CSGO again, hanged again.Removed the extension cable, started CSGO and problem is resolved. So i think this cable is not capable of load.Regards,Mazhar

This cable seems designed for very specific screw placement on the motherboard. Mine has that screw 1cm further from the back panel, and so the card isn't fastened to the case. They coud've made the mounting board a bit longer with more screw placement options (and perhaps a perforation to break off any excess). This would make it perfect.

These cables are pretty handy and somewhat stylish, however if you compare them to other products that serve the same purpose they're a bit overpriced. first if all the cables are made of rubber plastic not cloth, i was expecting them to be cloth extension cables but they were made out of rubber. second the combs for the cables are made out of transparent rubbery plastic, I understand that there was a look they were looking for, but having metal combs or hard high-quality plastic combs goes a long way. overall decent but expensive, if it is the colors you want this brand offers a variety of colors, but other than that i don't recommend if you are just looking for cable extension i would rather take the corsair ones.

After many failed attempts this Riser cable really does work on a PCI 4.0. Thermaltake cables no so much.Test rig:Asus Rog Dark Dero Crosshair VIIIAsus Strix 3090 OCAMD 5900X

First of all I would like to thanks LINKUP , Family they help me purchase the product.I tested LINKUP riser cable with RTX3090, Asus, Zotac & Palit @ full throttle speed and LINKUP Riser Cable working fine with best performance...

Looks really premium. Satisfied with the build quality and works fine without any issues as of yet. The extension is pretty long and can be used for a clean cable management.

Really high quality extensions, did not expect them to be this good. Nice thick metal cores. If you have a full height tower go the 50cm. Will buy this brand again for sure.

Im somewhat confused by this cable, and definitely expensive for what it is, its marketed as a PCI-e 4 cable but its not really that, so think twice before buying it, its an over priced PCI-e 3 cable that allows you to connect a PCI-e 4 GPU to it without getting BSODs and WHEA errors that PCI-e 3 cables might give you, this cable still requires you to set your GPU slot in your motherboards bios to PCI-e 3 mode, not PCI-e 4, so even if you're running a PCI-e 4 card, you can expect it to loose some performance running it on this cable.

Bonjour,J'ai acheté ce kit afin de modder ma config du moment.Le peu de retours semblait bon, le choix suffisant et le prix très intéressant.Au déballage la qualité semble très bonne, la rigidité des câbles est moyennement importante, les peignes sont du plus bel effet et efficace.Premier achat, je constate que mon manque d'attention me coûte une rallonge 1x8 pins d'alimentation CPU (ma MSI X470 en réclamant 2x8 pins pour alimenter le 2700X).Face à ma négligence et fort du constat de qualité du produit j'engage la conversation en contactant leur service client afin de demander si la vente séparée de la rallonge qu'il me manque est réalisable. Réponse très rapide, ils me proposent plusieurs solutions, bref je suis RAVIS !Tout reçu rapidement, remboursement éclair, ils sont très sérieux et ça fait très plaisir.Au final j'ai monté 3 configs avec ces kits (rouge) et chaque fois c'est nickel ! Je vous joins ma dernière config montée et qui tourne encore actuellement, un plaisir à voir à chaque fois !Je récapitule :+ qualité au top+ service client disponible et à l'écoute+ solutions adaptées, remboursement éclair+ prix très intéressant= gaine épaisse et rigide, donc angles trop bruts attentionC'est une recommandation sans concession de mon côté !!Si mon commentaire vous a été utile, merci de me le signaler en votant.

Thought very worth while sharing my experience here as I'm certain many will be looking for the same solution.First up, the setup - 3080 connecting to X570 Unify board - GPU mounted vertically in a Thermaltake P3 curved TG case and 240Hz TN monitor - eSports setup clearly.So PCIe 4 GPU & PCIe 4 mobo.My previous Thermaltake cable worked perfectly with my previous 2080Ti (PCIe3 GPU) - same setup.Had issues with the Thermaltake cable (poor performance, no image, low, varying FPS - so researched... PCIe cable issue seemed most likely - I did also try switching to PCIe3 on the port in BIOS, no avail - so found this, watched their own videos, read reviews (MANY reviews - Reddit and elsewhere) - looked this could be a fix.It didn't work for me unfortunately. Exact same issues - Tested using 3DMark PCIe bandwidth software (I paid for the suite, it was reduced on Steam) it just never reached the performance of PCIe4 throughput (along with occasional FPS dips etc.)So, just plugged the GPU directly into the board! Voila! Astonishing, simply astonishing, FULL PCIe4 bandwidth throughput, no drops, no glitches, just lightning fast performance - I may never mount a GPU vertically using an extender again - THIS is how it's designed to work.** Please understand, this in no way is meant in detriment to the actual quality of both this AND the Thermaltake cable, they both on the face of it do their jobs admirably, but did not fix my issue.Hope this helps someone - as I lost a lot of time researchingTake care

Very good quality and at a very good price, only one thing really but its nothing to do with the product is perhaps a few extra cable combs as I am a few short and couldn't find any on amazon so maybe linkup may read this and help me out. So overall if you want some quality extension cables at a good price go for it and purchase them !

Update: I upgraded to a rog monitor and I cant run 100hz without a crash, at 90hz it works but if you connect another monitor it crashes fast ! I don't think it can really handle the bandwith...Thank you for making this cable ! Upgraded from a corsair one, but i tested several they don't work on PCIE 4.0 !A few months back I decided to move from a I9 9900k, Aorus master, and Rtx 2080ti to AMD and I bought a Strix 570 F mb, a Ryzen 3950x a Msi 6800xt GPU and paired them all up with 32 gb 3600 corsair.2 X M.2 Samsung pro pcie 4.0I kept getting crashes, assumed its the CPU ( and it was a bit) as was getting errors on top of errors and a unstable system. ( the CPU had a few issues, tested on a friends system and it kept crashing, unstable at stock speed and Ram stock ! .. )Upgraded to 5950x and system seemed better, but sometimes refused to boot (Cpu errors and white light).Bought a crosshair hero Viii (used) , 1 boot achieved after 5 resets and 2 power offs, worst after long period being off ! Assumed its a faulty MB as the errors were different.Changed to x570 Aorus master, that one flat out refused to boot, tried different ram, same thing.Changed to another Crosshair Hero Viii, this one worked much better but still hard to get it started, eventually I tried the pcie on gen 3 and worked but with a lot of whea errors. (occt test)Was at the point where I thought it must be another bad CPU, honestly weeks of stress, I have build a lot of systems in my life and I do have a bit of I.T. knowledge..Stuck the new pcie riser cable today and so far very stable and no errors, just make sure you push it in well as I didn't the first time.The cable is well built but the red accent ruins the look, PLEASE MAKE IT BLACK !Lets see how it works and ill update !