UTSAUTO2Set 9005 9006 H10 Wire Connectors Female & Male Adapter Wiring Harness Sockets Wire 12V for Headlights Fog Lights

These harness pigtails are good quality. When my headlight harness decided to fall into my serpentine belt, it ripped the male connector off and spit it out. Leaving the female side still attached, but mangled. So I chopped them off and spliced in the new connectors. To my surprise, the replacement connectors were better than OEM. The wire was thicker & full copper. Although it looks like the same gauge wire, there was physically more metal beneath the insulation than stock. And the weather proofing on both sides of the connectors was good quality as well. I was very pleased with these connectors. They fixed my headlights. Now I can drive at night again with no drama or fear of getting pulled over.

Do not buy this product if you need the wires to be 14 AWG. The gauge of the wires is actually about 20 AWG, maybe smaller, which is only useful for very low current 12 or 24 volt applications. The answers to questions about this product are incorrect: the wires are *NOT* 14 gauge or anything close to that. Perhaps this is why the product description conveniently fails to include this specification. The only lights these would work with would be low draw LEDs, otherwise the small wire gauge will likely impose excessive resistance. The connectors themselves are basically OK, but the wires leads are a joke unless you're working with a very low current circuit.

Bought these to wire in an accessory on my UTV. Wired them from fuse box to new lights but didn’t notice the factory wiring is backward, connecting positive to negative (see picture). I guess I should have noticed, but I made the mistake of assuming that they came wired correctly. Connected them and tried to turn on the lights. Instantly popped a fuse. I replaced the fuse and took these inferior connectors out. Lights work now, but I now have a big problem. When I turn on the high beams it now kills the engine. Something inside the fuse box or a relay is now fried and I have to troubleshoot to make my vehicle work correctly. All of this trouble because these plugs are carelessly assembled. Who knows how much these POS plugs are going to cost me in time and money to fix the problem they caused!!!

This isn’t a true 9005, which is why I originally bought it for. A 9005 plug has two channel tabs on the bottom and this has only 1. So if you’re needing a male 9005 plug, this isn’t it.Secondly, the pinning of the red/black wire is very inconsistent. See picture. But you get what you pay for.

Used to install/replace pods as fog lights. Good for the application, let’s see if it holds up to the elements.