Triplett 8150 CamView IP Pro 5 CCTV Security Camera Tester | 5" Touchscreen - 4K / 1080P IP, Analog, TVI, CVI, AHD

Hard to believe the quality at low cost! So many features in one device It replaced three testers. Ip cam, Poe, cable testing, ping, port flashing. Tough case included

This turned out to be an awesome tester at a low price. It does all IP cameras, supplies POE to the camera, and also does older coax and 485 PTZ control. Very nice touchscreen and operating system.

Pros: Works well with most cameras, nice touch screen interface, battery time is good Cons: 2.4 Wifi band is weak and 5ghz is not supported at all, No HDMI IN port which should be available for a tool at this price point. Interface gets hung up at times and the unit runs a specialized version of Android with no updates from Triplett. Very expensive for what you get. In Retrospect: I would have returned this unit because of it short comings but ended up going beyond the 30 day mark so it's mine. Plus there is no real phone based tech. support you can speak with. It's really no better then a Chinese model. Would I recommend this for a cctv professional? It has a number of advanced features but NO! It's good for advanced home use but that's about it that want to work on their own systems. But for the Professional, there are other units for just a few bucks more that will do more. Bottom line, do your homework and buy one that fits your exact needs.

This might sound more like an open letter to Triplett tech support, but I actually purchased this device on the recommendation of a fellow CCTV technician. It turns out that he, too was aware of this issue with Axis cameras, but unfortunately for me, many if not most of the cameras I'm assigned to work with are Axis IP models. No matter what I tried, I could not get the Triplett 8150 CamView IP Pro 5 to login after discovery - using any of the IPC/ONVIF functions. There is even an Axis app included in the rather impressive software list, but still no video due to login failures. Absolutely no amount of camera resets, or any combination or Axis usernames and passwords would allow the tester to access the cameras. I tried it on 3 different models, both on the LAN port and on a network. Even after updating all the application firmware, I spent hours trying to find a solution. I would like to mention that the tester worked perfectly on the 2 other models I tested, a Hikvision and a Honeywell, so I honestly have no other issue with this device, and I would happily recommend it, so long as you're not working with Axis cameras.

This by far is not an overly advanced device but it gets the job done. I've only had it a few days but have used it to adjust a camera, reset IP addresses on preconfigured cameras and to enable DHCP on cameras already placed on the network. I've also used the PoE and OTDR features which worked flawlessly. One of my customers was so impressed with the ability of the device for the price their installation coordinator/lead purchased one and is make the recommendation to their install techs. The cameras I've worked with so far have been from various manufacturers and I've had no problems connection to any thus far.

having used a different model of the triplett IP tester that worked very well for years. This new ones battery lasted around ten minutes and never brought up the camera to view. The camera being a standard OnVif camera. I'll be returning it.

Great product! Being android based and coming with chrome installed was a huge benefit. In cases like with Axis cameras they don't natively allow for ONVIF control but can view setup properly using Chrome and to configure ONVIF through the cameras ip address and the default username and password. Only thing I don't like is that it claims to allow for use with 4k cameras, which isn't actually true because it cannot display 4k camera views and the stream must be changed to 1920x1080 to view it properly.

Log into IP cameras and get them set up just as easy as using a laptop. Nice screen that you can read, POE output works well, DHCP server works and seems quite sturdy and well built. The interface might take a little getting used to but this is a MUST HAVE for IP device installers.

El equipo funciona muy bien. Tal y como viene en la descripcion.