Storystore 8 Pcs 1/2" Thick Foam Padding Sheets with Adhesive Backing - 4" x 4" Closed Cell Foam Neoprene Rubber Pads with Anti Slip and Anti Vibration, Black (4Inch x 4Inch x 1/2Inch, 8Pcs)

I ordered this item to replace the rubberized base on a 20+ year old stainless steel travel mug. So far it's working great, and I now have extra on-hand for other projects. The adhesion is very good, with no peel-back at all.

The adhesive backing is very strong and holds firmly in place. Sometimes removing the backing took some effort but other than that they are good foam squares.

I'm using the 1/8" thick version to add padding to the wrist shelf on my keyboard; I found the 1/4" was too thick for what I wanted. I'd been using dedicated products, but they cost as much as this whole pack, just for two squares of material that really weren't even wide enough to support my whole hand. A really important factor for this is that the pad can't be slippery - the bare plastic is, and that's one of the problems I'm trying to solve. Silicone pads have a similar subtle squish (usually just a bit softer than this foam) but are much more slippery, even the dull/matte looking pads. Silicone is known for being nonstick, so no surprise.These were very easy to trim to size, and unlike trimming something like a mousepad, the top layer on this foam doesn't want to immediately delaminate from the inner layers when you cut it. After a week of constant use they're still looking good.The adhesive is strong, in a pleasant surprise sort of way. I was still able to reposition them as I was fitting them, but even after doing so they're not lifting at the corners or anything and it's a curved contour they have to follow; I wouldn't have expected them to do flawlessly. Here's hoping it stays that way.My only complaint is actually that the adhesive is strong enough that getting the backing to peel away cleanly is difficult - I noticed this on the 1/4" and on the 1/8" both, so I'd expect it on all of the varieties. You need to be very careful that you're actually unpeeling the paper from the adhesive layer, rather than having the adhesive layer stay firmly bonded to both the paper and the bottom surface of the foam --- the middle, soft part of the foam sandwich will try to tear away instead. I found I just had to try a different corner, and sometimes a third or even fourth spot to get the paper to peel away cleanly - though once you can get even a tiny bit of it, the rest comes easily.

Use these for padding in sons go kart. Works great

Fortunately people are willing to share successful efforts online with others so that they too may benefit. That was the case here. I will not go into all the specifics, but the individual linked this product in order to complete the task and it worked like a charm. The foam and adhesive seem to be of excellent quality, price was certainly excellent. Very pleased.

I have 2 12 inch subwoofers in my car trunk. I put 2 layers on the back of my license plate and put screws in the 4 holes of my license plate. It took away 75%-80% of the license plate rattle against the trunk.

I have the 1/8" sheets and since getting them not a week goes by when I think, "hmm, I bet that would work for . . ." I have them stuck to the back of my phone and tablets so they are much much less likely to slip out of my hands.The adhesive works well on glass, metal, plastic and even unfinished well sanded wood. It cuts well with exacto blades and flicking a corner of the backing to peel it off has always worked for me. Remains to be seen how long the material holds up, but the one on my phone which sees my back pocket daily is still going strong after 2 months and I expect it will last at least a year.

I purchased to install on the floor area of a new Kayak for traction on the hard plastic surface. And while it does provide some traction, and the sticky-back is quite secure, the foam itself is surprisingly delicate. It is really easy to tear or "rub" chunks out of it, so it didn't take long to go from looking great to pretty gnarly.

These are exactly what I expected. The sticky is good and the density is decent.

Me gustó el material, coadyuba en la reducción de los molestos ruidos por vibración de los objetos qué guardamos en el glove box, consola central y monedero. Hay diferentes espesores y tamaños, lo recomiendo. Soporta las temperaturas altas dentro del auto. Saludos.

Very handy, odor free with great adhesive will stick just about anywhere and provide excellent bump protection for knees and heads or whatever you keep bumping.

As described. Seem a little fragile but was able to cut and peel backing off without problems. Stuck to back of fan cage and has solved vibration noise. No issues so far. Next going to try to silence washing machine back panel that vibrates noisily when spinning. Don't see any issues. Received a good quantity so will be able to use for a number of vibration issues.

He used them for kneeling down in the canoe when out by himself. He thought they were great and doing the job of protecting his knees and giving some cushion. But whwn the water came in the canoe, the adhesive didn't stick.Great product, just not around water