Engine Startup Steps:
1.Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three AA batteries (not included) to close the bottom plate.
2.Fill the fuel tank with gasoline (95). When the filling is completed, make sure there is no air in the oil pipe.
3.On the right side of the engine, slowly turn clockwise to buy more than one turn, its role can make the mixed gasoline fully enter the cylinder.
4.Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine.

Precautions:
1.If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted.
2.screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio.
3.Check if the water tank lacks water. If there is air in the cooling pipe, the pump can't work normally.
4.When the machine stops, the power switch should be turned.
5.Due to the different display and different light, the picture may not reflect the actual color of the item.
6.Please allow little differs due to manual measurement.
7.Kids should be accompanied by adult.

Specifications:
.Material: Metal + Wood
.Product Size: 18 x 12.5 x 22cm
.Product Weight: 1610g
.Package Dimensions: 25.5 x 25.5 x 25cm
.Package Weight: 2340g
.Packing: Box

Package Content:
.1 x Gas Engine Model
.1 x Hand Start Device

Brand	CT-Tribe
Model Number	P112W5E647KJ7XT5446E8G
Product Dimensions	18 x 12.5 x 22 cm; 1.61 kg
Material	Metal + Bamboo
Item Weight	1.61 kg

CT-Tribe Stirling Engine Model, Vertical Hit and Miss Complete Engine Model with Hand Start Device, Stem Toy and Science Engine Kit for Over 14-year-old Teenagers and Adults

Details

Description

Specifications

Common Questions