TrendMortise and Tenon Jig for Perfect-Fitting Joints, Ideal for Furniture Construction, Fully Adjustable for Compound Angle Joints, MT/JIG

Tenon jig from Trend do the job it should do, however it is very sad that the dust kit cannot be delivered at same time as it is a most to have . Trend Tenon jig without the dust kit is incomplete, the dust kit is as much important and the jig should not be sale with the missing kit.

El realizar la mortaja en diferentes ángulos

I feel for the price it is of poor quality, the clamps are very cheap. Also I found play when you cut a mortise.It will the job done so I give it a3 out of 5.

J'ai utilisé ce jig pour produire des tenon et moratoire dans du noyer noir et cela a été très facile et d'une excellente qualité de travail.

Not ready for use out of the box. It appears that the top pieces where stamped out. The edges are rough and has dimples on the edges which require filing. You have to adjust the spacing for templates as not set from the factory. The instruction are well written and explained how to adjust this. The tilting back plate was not strait on the top. What I found was that tightening the tilt lock screws pulled the top outside corners in so when using the outside camps angled the middle of the timber away from the back face. A washer between the inner body and the and back plate fixed this for me. The F clamps must be a upgrade as they have pads on each end and the pad supplied to use the forth clamp does not fit these. They are of a high quality. I only gave four * because of the work involved to make it usable. All in all it is worth getting. Remove the clamp pad from the fixed end or the clamp will be at a angle. I had problems using the set up bar on the center line. it never came out right for me. Reverted to using a dial indicator from the back side. That must be why Trend recommends doing the tenon first. I do this by raising the piece above the table for center line fine tuning. Now that I have done all of this I am happy to say it makes a perfect mortise and tendon. I would highly recommend it.