FXC 10x 3/4" Round LED Clearence Light Front Rear Side Marker Indicators Light for Truck Car Bus Trailer Van Caravan Boat, Taillight Brake Stop Lamp (Amber, 12V)

Added blinkers to a golf cart. Extremely bright.

Perfect for my application. The wires are a good thickness and the brightness is bright enough for what I used them for. 3/4 drill bit was the perfect fit. Nice and snug but you don’t have to fight them in. The rubber grommet around the light comes off, you stick in the the hole you drilled and then feed the wires and push the light into the rubber. Easy stuff. Would recommend.

So bright

Work great, nice and bright. Well made and easy to install. I used a 3/8 inch spade bit to drill my holes instead of a 3/4 inch. The rubber part around the light fit much tighter and had a cleaner look. If its too tight, just file the hole a little bit. Wiring on the lights themselves is cheap and when stripping the ends, the tends to break, so be careful.

I bought these yellow lights to give a more robust touch to my jeep, I love how it looks and it looks beautiful.

These are very bright and easy to install. Just as described and they were shipped quickly.

In the attached image, you can see that I used these nice little lights for turn signals. I was apprehensive about their brightness, but I shouldn't have worried. They are very bright. Also, they are versatile and very easy to install. The layout took much longer than the installation. Make sure you have a good 3/4 hole saw and paint the fresh metal to prevent rust. The lights pop into the hole without too much effort. If you want to tighten them up in the holes, place a plastic cable tie behind them and tighten it while pushing gently on the lens. This works well. Buy with confidence.

When I first received these, I was immediately concerned with how small they were. The grommet that holds them in place is 3/4", so the lights themselves are more like 1/2" diameter, and so they're pretty tiny. Based on the reviews of how bright they are, I installed them at each corner of my trailer, and are they ever bright. Nobody will have a hard time seeing this trailer at night. They're so bright that the red ones are about the same brightness as my brake lights which are also LED and about 5 inches long. They're much brighter than the old school incandescent brake lights on my pickup truck too. This makes it really nice for visibility when I'm backing the trailer up at night. They even help illuminate the ground beside the trailer a little so I can see obstructions that my truck's reverse lights don't help with. I did have one light go out right away, but when I looked at the wiring, I found a rodent of some kind had chewed it, so it had nothing to do with the light itself. When I spliced the wires back together, it lit right back up. I've had them on for a few weeks now and they're trouble free so far. I will update if I end up having any issues with them, but so far so good.

The light is more in the pink side for the red, but the amber is great.

I bought a 10 pack of red and a 10 pack of yellow. Absolutely fantastic. Drill a 3/4" hole in steel, aluminium or plywood and pop the grommet then light in. Wire as you would any other 12V light. Heads up though, the lights do not work if you reverse polarity. This means that you need your hot wire and ground wire to be correct. Unlike incandescent lights, these guys go one way and that is it. If you are looking for trailer lights, here you go. I am just about to order more.

Bright enough, easy to connect but they are not water proof, two have been damaged from washin the car only, and I double checked the wires and connectors to make sure they are sealed.

Like

Satisfait du produit