Dust Shroud Angle Grinder 7 Inch Dustless Vacuum Universal Surface Cover with 4pcs Locating Ring,for Concrete Stone Granite

This is totally worth the money! It’s not the most expensive but durable & does the job keeping the dust level down.

Did not fit what I needed so returned, does it work, don't know.

I was ready to leave a scathingly bad review since this was clearly not going to work simply by looking at it after installation. The grinder sits a half inch below the bottom of the shroud so there is no way it will keep the dust inside. I decided to get some painters tape and tape a half inch skirt around it to help give it a seal and it works now. Hopefully others read this and do the same thing. They should have given this a brush skirt, but this is the next best thing. Yes, you will need to re-tape it every half hour, but this takes less than 2 minutes. You also need a double layered bag in your shop vac, so don't even bother with this if you don't do that.

Not universal. Also so large that it impedes the disk from contacting the surface evenly.

Buen cubre polvo en relación a precio - calidad

Is not the best.

Good product holding the dust and convenient with the lip. But the screw always comes off. So i have to put a washer and and a longer screw

There are far better shrouds out there. This one doesn’t fit right, doesn’t lock into grinder. I had it move while using grinder and melt. It was extremely difficult to get it off the grinder.