WALI Monitor Arm Mount for Desk, Single Extra Tall Computer Desk Mount, Monitor Bracket Mount Stand Single, up to 32 inch, 22 lbs (M001XL), Black

The Wali Single Monitor Desk Mount works better than I expected. First, the basics. The mount comes well packed and the instructions are very simple to understand. There is so little assembly required that the instructions are almost not needed. Assembly and installation can be done in less than ten minutes (not including cable management if you choose to use that feature). Adjusting everything is easy. Overall quality of the parts and the assembled product are quite good. I have two monitors that I wanted to mount on a flat desktop. I needed to be able to get the monitors right next to each other and still have the desk flat against the wall. Most double monitor stands will not allow for this unless your monitors are the perfect size for the spread of the arms. The movable arms will usually flex toward the wall if you want the monitors to be edge-to-edge with each other. The result is the desk having to be offset from the wall to accommodate this. By using two single monitor stands, I am able to move the posts to positions that allow the arms to be extended in such a way that everything is flat with the wall. The other frequently stated issue with most monitor stands is that the arms have hydraulic pistons and/or springs to deal with the weight of the attached monitors so they are easy to move up and down. These pistons and springs are often of poor quality and either fail quickly or don't work as expected from the get-go. This is not a problem with the Wali Single Monitor Desk Mount. The arm is solidly attached to the 16" pole and only moves up and down by loosening the arm mounting and sliding the arm up or down on the pole. The arm, once set to the desired height, can be move forward, backward, side-to-side and tilt. This makes for a much sturdier setup with no pistons or springs. This system works very well, since I (and I think most people) have little need to move a monitor up or down after the initial installation. I leave the included Allen wrench stuck in one of the vertical facing screws behind a monitor so that it is always handy but out of sight. If I do need to move the monitors up or down, the tool is right there. I will buy two more of these for my wife's desk.

This is the monitor mount I should have had all along. The extra tall pole allowed me to mount my 32" monitor at the correct height (something I couldn't do with the spring-mount I previously had. It came with good directions, everything needed for install except for a Phillips head screwdriver and a 10mm wrench for one cap nut. The arm that holds the monitor is highly adjustable, and once everything is tightened down, very sturdy. I recommend this one without reservations.

I bought the 31.5 model to mount a 27" monitor above a 32" monitor on my desk. This is the first monitor mount I have ever purchased and I am thrilled with the entire mount! The installation instructions were simple to follow. All hardware was clearly notated and packaged by part number. The mount holds the 27" monitor (which isn't all that light) perfectly above my desk monitor and is very stable. Adjustment is easy and effective and It doesn't wobble one bit. The cable routing clips work well and are literally a snap to install. I used the clamp mount but a screw-down desk mount is included.

Its definitely sturdy and works well but it kind of feels very rigid in positionality. It does stay where you position it but I feel like it should be easier to position it.

It seems to be a well made and sturdy unit. I've been using it for about a year now and I am still pleased with it.

I wanted a mount that worked with a desk grommet while still allowing cables to go through the hole, would work on a narrow (22") desk attached to the wall without making my monitor stick out past the front of the desk, and was under 20" tall so it would fit under the overhead cabinets. This mount hit all of the marks! Installation was fairly straightforward. The only issue I had with the whole install was that the VESA mount screws were a tad too long, leaving the bracket a little less than snug. I grabbed a couple spare washers from my garage, and I was back in business! I like that I can lock in the height (have to tighten it with the allen wrench, but I don't intend to move it often), the arm articulates well, and it supports rotation. I also like that the VESA mount is in two pieces, which allowed me to mount it to my monitor and then slide it into place on the arm, securing it with a cap nut. It feels secure, AND I get to recover the space underneath the monitor (and permanently evict the dust bunnies!) I paired this with a small rectangular USB 3.0 hub, which I was able to zip tie to the arm, allowing me to hide all my peripheral attachments. The included cable management is simple and does the job. Super happy with this purchase!

I recently purchased an LG 32UN500 monitor weighing ~17 lbs. The included monitor stand was not great according to the reviews so I opted to purchase another stand. The WALI would take the load and it appeared solid. Assembly was straightforward. I opted to put a hole through the desktop for the stand. The monitor came with its own screws for the VESA mount so I used those. Once assembled I adjusted the arm height and tightened the arm to the stand so it would not slide. I then placed the monitor with the attached VESA mount in the arm mount and attached the nut to secure it all in place. Adjustments are easy with the supplied Allen keys. The stand allows me to tilt, swivel, and raise/lower the monitor height. Solid product that does the job it was designed to do at a reasonable price. Adjusting the height does require loosening the fastener so if that is required frequently you might consider another stand. One last point, the attachment to the desk requires so little space that I have regained all the space I lost to the stand for the previous monitor.

Bought this to hold 32in monitor above imac 27in, does the job and very good quality.

Good product

This is great - all metal and very solid. It’s probably not as adjustable as others, but for the price it’s great value and works best for a monitor that won’t be moved often.

You can buy cheaper items than this but the arms sag. This is solid as a rock. My only caveat is that if you should want to return it because you have changed your mind you will end up paying the postage back to the States! Also note that the pole on these items has a larger diameter than some other makes so beware if you are adding extra arms etc.

Brazo robusto. Todo metálico a excepción de las pinzas para cables. Algo limitado en los ángulos de las articulaciones. En mi unidad el tornillo que ajusta el soporte VESA al brazo no encaja del todo bien y queda una pequeña holgura, pero parece solucionable poniendo otro tornillo y tuerca que ajusten mejor.