FPV VTX SpeedyBee TX800 Pit maximum 800mW 20 * 20mm Mounting Hole IRC Tramp & App Support with MMCX Antenna for FPV Drone

I needed a dependable vtx that could do a good distance, without a large price tag. I decided on this one, and am happy with it. The vtx it replaced had lots of noise from the motors in the video, whereas this one almost eliminated it all. I have ran it out to 1.10 miles above corn fields to test it's range, and it started to get some static, but I was forced to turn around because battery life, not because of reception. I am running a simple setup with a NAZA flight controller on a tbs 500 style frame, so wanted a vtx that could be setup manually and easily, and this did the job just fine. I would definitely go with this one again if I have another fpv model that needs it. The only thing I would mention, is be careful of the input voltage, as many cams can take pretty high voltage, but this cannot, so you may need a regulator.

Works good and no trouble with ser up or operation

Accidentally soldered this to the 9v pad on my FC which was directly to the left of the other VTX wires in the same row of pads. I should have connected it to the 5v pad as indicated (my bad, I was in the solder zone). It worked great during the build, and even for a few test flights, but alas, the extra voltage seems to have cooked it. You will be missed, TX800. Gone before you even grew your wings.

VTX works great! You need to UNlock it (in the instructions), then just add the VTX presents for the TX800 in Betaflight. If not the script instructions provided in the manual. DO NOT wire the VTX in the instructions shown. Watch a Youtube video on wiring it

Picture quality works better than some of my 1.5w VTX with this l on 800mw capability to fly far and has solid range penetration, wiring and installation super easy. Every quad I have them on I've never had it snow out or lost one! Not calling these the greatest thing in the world but for the money works out great for me.

Make sure right the way if your item is in a good shape

Beware of the 5V power. This one can be istalled with or without heatsink. Only complaint the led lights for CH, FR, PWR are hidden once the heatsink is installed. If you need to program it do it before install. Smartaudio connects but wont switch channels. The feed is crystal clear and testing the power transmitted pwas far more that 800mw. Got a constant 1000mw and after 5 min running with fan was 910mw. Amazing little fellow. Cannot go wrong with this one.

Fits better than my race ranger in my quad. Ranger put out 1.2w this is 800mw but I get better range. It is a few grams lighter also. Tramp works exactly like smart audio so you can adjust things in goggles with controller. I easily get a kilometer with trees and buildings. Haven’t had a open field big enough to loose picture yet.