Chestnut-YX Balloon Stuffing Machine With 800W Electric Pump and Expander 46cm18.1 Stuffer a Classy Way to Wrap Your Gifts Tool Kit (Green), 18x18x17.1in

Description

Operation method: 1. First inflate the small balloon for use, or prepare a small gift.2. Cut the ball mouth: wide mouth bobo ball must be cut short, 18 inch latex ball does not need to be cut, 36 inch is recommended to be cut short,so that the ball and the filling machine mouth wall will fit more closely after inflation, and the mouth will be larger.3. Balloon Expander: Use the flaring device to expand the ball mouth, put the ball on the filling machine, and turn the balloon out from the inside.4. Fasten the upper hemisphere to the lower hemisphere, align the edges, and evenly lock the 2 spring clips (remember not to lock all the spring clips at this time to facilitate the air discharge!), start to inflate, and quickly remove the remaining springs after reaching the required size Once the clip is locked, you can stuff a small ball or stuffed toy.5. If the operation time is too long and the big ball runs out a lot, it can be inflated twice. Before inflating, release the spring clips (12 reserved evenly), and then perform a second inflation. After inflation, quickly lock the rest of the spring clips.6. After filling the ball, take out the big ball and use the air pump for final inflation. The operation is complete. Note: 1.It is normal for the big ball to slowly spread air inside during operation. The physical seal used by this tool cannot be absolutely airtight. Generally speaking, one inflation of the big ball can complete the entire process of stuffing the ball and the toy. If the operation time is too long and the big ball has too much air, just perform a second inflation.2. In the process of putting the bobo ball into the mouth of the packaging machine, try to cover it as deep as possible, otherwise the mouth will be too small after the ball is inflated and it is not convenient to insert a balloon or doll. Review: Damaged - Received damaged, burst open in several areas. Unusable. Review: The removal of the balloons from the expander is hard, the ballon keep popping…. - The balloon removal from the expander hate it. It should be a easy way to do this