DEWALT 20V MAX XR Framing Nailer, Dual Speed, Bare Tool Only (DCN692B)

I recently purchased the DEWALT DCN692B 20V Max XR Brushless Dual Speed Nailer, expecting a reliable and efficient tool for my projects. Unfortunately, my experience has been frustrating due to constant jamming issues. From the very first use, the nailer frequently jammed, causing significant delays and interruptions in my work. Despite following all recommended maintenance and operational guidelines, the problem persisted. The jamming often required me to disassemble the tool to clear the nails, which was both time-consuming and inconvenient. Additionally, the dual speed feature, which was a major selling point for me, did not seem to make a noticeable difference in performance. Whether on the high or low setting, the nailer struggled to consistently drive nails without jamming. Overall, the DEWALT DCN692B did not live up to its promises of efficiency and reliability. The constant jamming and underwhelming performance make it a poor choice for anyone looking for a dependable nailer. I would not recommend this product.

Excelente Producto...sin Fallas...muy práctico

Ok so I just bought this to build my large two car garage. There is a lot to know about this tool and it's expensive so people deserve to know the truth. The average temperature was 30F. It seems to work fine in the cold. First, remove the no mar plastic tip. There is no reason to use this for framing. Second, get some nails. I bought these from Amazon. They were the biggest I could find. https://www.amazon.com/gp/aw/d/B00005JRL5?psc=1&ref=ppx_pop_mob_b_asin_title They worked great. Much bigger than the ones at Lowe's and much smaller package. I didn't need 3000 nails lol. For the large nails you set the speed setting to #2. These drove perfectly every time except when trying to nail through 3.5" of solid LVL, which had to be hand finished the last 3/8" which is two or three taps with a hammer; no biggie. For attaching the 1/2" OSB I bought these nails https://www.amazon.com/gp/aw/d/B00005JRL5?psc=1&ref=ppx_pop_mob_b_asin_title They also worked really well. I also tried there ones from Lowe's but those jammed more which I'll explain in more detail now. The manual recommends speed setting #2 for 8d nails but I found this setting in about 1/4" into 1/2" OSB and I wasn't thrilled so I set the speed to #1. This seemed to cause jamming at times particularly when I would anticipate the recoil and pull the gun away. Once it's jammed it can take as few seconds to several minutes to unjam. My arm was getting tired because this gun is heavy. I'm not saying compared to other guns, I'm just saying its heavy and if you're a wimp this might not be the gun for you. I'm 6' 230 and been in and out of the trades since I was a kid but the past 10 years people just use me for me brain and I sit at a desk and do engineering and I'm not in the best shape. Ok so back to the jamming, the nailgun and the directions and I agreed to disagree and I settled on speed setting #2 but i shot the nails at an angle so they would not penetrate the sheathing more than a whisker. This worked great and I had no more trouble. I also tried the bump setting and it worked satisfactory but the gun is so heavy it was difficult to control the aim precisely but it works fine. You still have to let it charge a bit between shots. You can't go as fast as my pneumatic Bostich roofing nail gun but you can go at a good pace. You'll want to keep the clip full. I had a few jams when it was on the last nail before dry fire lockout but it could have been my technique, I'm not fully certain. At the end of the day, I didn't have to deal with my air compressor in cold weather and the noise that a compressor makes and the hose and that drama. I listened to music and worked whenever I wanted with no trouble. I'm not sure what else to say. I'm satisfied with the product and glad I bought it.

resonable pocket handle i like, I like the weight and seems good on battery 5ah. The lock button is right on your hand grip which i dont like because you cant help but to bump it when you go to nail otherwise good.

The Dewalt DCN692B 20V Max XR Brushless Dual Speed Framing Nailer has proven to be an exceptional addition to my toolkit, and it undoubtedly deserves a five-star review. Here's why I'm thoroughly impressed with this tool: Power and Precision: This framing nailer delivers both power and precision, making my framing projects a breeze. The brushless motor ensures consistent performance, and the dual-speed functionality allows me to tailor it to the specific task at hand. Cordless Convenience: Being part of the 20V Max XR lineup, it's cordless, which provides unmatched convenience. I can work without being tethered to an outlet or dealing with tangled cords, improving both safety and mobility. Exceptional Build Quality: Dewalt's reputation for quality tools holds true with this framing nailer. It's sturdy, rugged, and built to withstand the demands of construction and framing work. I have confidence that it will last for years to come. No-Mar Tip: The inclusion of a no-mar tip ensures that I can work without leaving unsightly marks on the surface. It's a small but essential feature that demonstrates the tool's thoughtfully designed nature. Reliable Magazine: The magazine is easy to load, holds a significant number of nails, and rarely jams. This reliability keeps my workflow smooth and efficient. Tool-Only Option: The option to purchase the tool-only variant is great for those who already have Dewalt 20V Max batteries and chargers. It's a cost-effective choice, allowing you to expand your tool collection without unnecessary duplicates. In summary, the Dewalt DCN692B 20V Max XR Brushless Dual Speed Framing Nailer is a top-tier tool for framing and construction projects. Its power, precision, cordless convenience, and exceptional build quality make it a standout choice for professionals and DIY enthusiasts alike. I couldn't be happier with this purchase, and I highly recommend it to anyone in need of a reliable framing nailer. Five stars without a doubt!