Mcbazel RGB Scart AV Cable for SNES GameCube(NGC) N64 NTSC

I got this because I knew it would be better than composite and it was cheap, so for the price paid as is its a great cable that gets the job done. If you want a bit of a project and have a spare VGA cable and are handy with a soldering iron you can convert this to a fully shielded cable. Here's a before and after photo.

Modding all my old systems RGB SCART, even though I am in America. I was going to import some of those recommended UK $40+ cables, but gave these a try as UK was out of stock. Modded SNES with Lord Voultars RGB bypass and plugged this cable into the Retrotink SCART. Earthbound title came on and my jaw dropped. I have both RF out and SCART via hdmi hooked up to my Samsung LCD. RF out looked blurry and rainbowed, with ghost images and off sound. Switch over to SCART RGB and you can see every pixel, with straight lines and no blurring. I have no reason to upgrade to those expensive ones. I bet I would not be able to tell the difference with my 15/20 eyesight. Maybe so impressed just with the price I was not expecting much. SNES seriously looks like its emulated on PC. I am still awestruck. This company needs to make a Genesis 1 SCART w audio jack, id buy it!

This is a very cheaply made cable that is not wired for CSYNC. However, if I don't put it near any unshielded speakers, it puts out a great signal from my 1CHIP REV. 2 SNES. People here have talked about rewiring it for CSYNC, and you can certainly do that unless you have a 1CHIP REV. 3. However, I felt no need to do so. The image quality I have is almost perfect and rewiring would be a waste of my time. You can get much higher quality cables from elsewhere for about $40 at this time and they are great, but with these you can get almost the same signal quality for 1/4 the price.

Black screen on my PVM. Basically this cable is extremely low quality, and the wires inside are SUPER thin with no shielding. I'm keeping it to use the connectors. Fair warning, no clue how people opened up the the nintendo multi out connector without completely ruining it. Maybe I don't have the proper tool, but I work with electronics engineering and have plenty of fancy tools. Multi out connector looks like it was glue together, because it popped open and yeeeeeeeea.. I would avoid this and build your own cable or just pay up for the reputable brands if you can find them in stock.

When I first started getting into RGB on retro consoles, I was just happy to get SCART -> HDMI so my SNES worked on my big new LCD, I thought I was living the good life reviving an old console... Well after I got this working I figured I'd start trying to get my other consoles on the RGB train, starting with the N64. This led to tons of research and I ended up finding a little something called C-sync (Composite Sync), which I thought was the same thing as sync on composite. OH NO MY FRIEND.. DO NOT CONFUSE THESE TWO. If I had to compare them, I'd say its like going from the old RF adapter and channel-3 to S-video... Buy this cable, and then do yourself a favor and move pin 9 to pin 3 (on the SNES AV connector side) and install 330 - 450 ohm resistor on pin 20 (SCART side), this was a yellow wire on mine. After this, you will basically unlock god mode for your SNES console and see ever bit of detail in crisp amazing color and sharp edges. My eyes still have tears in them after seeing the sprites that had been hidden by terrible video quality my whole life. Literally the best $8.99 I ever spent. I see people complain about being unsheilded but so far I haven't noticed a problem. I did go ahead and buy some metal tape to wrap around it at some point.. but I can't imaging the image quality getting any better than this. FYI, I was fully prepared to drop $50 on a pre-made cable, but they just don't exist right now, none of the retro sites had them in stock. So glad I didn't wait and just did it myself.

Using this to connect SNES to a Scart2x scaler and it works perfectly. Note that if you plan on using this for an N64 it must be Rgb modded first

An okay cable with some video noise and Audio buzz. It can be fixed with some modding, but I only bought It Because I had already ordered a different one and was looking for a temporary rgb cable. This is okay in a pinch and can be modded to work better. But only if you know what you are doing.

I used this cable to connect my Super Famicom to an OSSC upscaler and its great. Bright crisp clear picture with no signal issues.

Awesome works perfectly with the retrotink 3xpro. I do live streaming of retro games, and this helped me play via the Retro tink laglessly and effortlessly, while keeping a great sharp visual and sound, for the Genesis, in this case which is not listed by the seller, but it for sure works. I also have the same cord for the SNES and again works flawlessly.

Es un buen cable para su precio. Sirve para SNES (saca compuesto y RGB -el SNES Jr no tiene salida RGB, por lo que en esta consola solo sacará compuesto-), N64 (saca compuesto en contola sin modificación y RGB en consolas con la modificación) y Game Cube (saca solo compuesto, el RGB no lo detecta, por lo seria mejor conseguir un cable de video componente con salida por el puerto digital). Lo recomiendo para salir del apuro aunque obviamente hay mejores opciones en el mercado como los cables de HD Retrovision, Retro Gaming Cables o Insurrection Industries. Probé este cable con la Retrotink 5x y no hubo problema. Solo tener en cuenta que no es el cable con la mejor calidad, pero repito, para su precio, cumple.

I was sceptical and rightly so since the major brand ($60+) scart cables are praised for being so wonderful. However, if scart is your preference, this sub $20 scart cable will do. Though I am very pleased and experienced no issues at all, it is always a good idea to place your power cables and video cables separately; keeping them from running side-by-side or overlapping. Doing so helps to prevent any electrical interference from power cords that are not shielded well. I have found that keeping the power and video cables apart has always proved to be helpful when enjoying my retro game console on any tv.

Para compatibilidad con OSSC se tiene que mover el pin 9 (Composite) del Multi-out al pin 7 (Luma Sync), al menos esto me funcionó con una SNS-RGB-01. Tuve que desensamblar el cable completo para encontrar el problema. La calidad del cable es pobre y la salida del video también. Muchas veces parpadea la imagen, otras veces se va por completo. El audio también tiene problemas. Considero recablearlo por completo usando RG-179 (mini-coax 75ohm) y solo usar las terminales. El audio y video no tienen tierra. Muchas cosas por mejorar.

I rarely do reviews but this cable deserve it. I have other scart cables for genesis, saturn etc... But this one is really cheap made and once I open up the package, the scart plug fell off. Look for another one/brand for this particular Gam3Gear cable for N64. Returned it and didn't ask for replacement.