SmallRig cage with grip for sony zv-e10 3538

best to buy

Ideal for rapid shooting and for a small mobile production team. Like all Small Rig gear, excellent build quality

Quality of material is very good. It gives good grip to hold the camera. But felt it is over priced. It fits perfectly to the camera. No need to remove the frame for battery replacement, charging and SD card removal. Once you fix the frame no need to remove it. Will not guarantee it will protect your camera. will give more confidence to hold camera without any fear of fall.

One of the interesting things about purchasing products that have been on the market for a few years is that they have been tested. This discovery of the most insightful benefits and most woesome issues has informed the development of the SMALLRIG Camera Cage for the Sony ZV-E10. And the cage makes the experience of using the Sony ZV-E10 a lot more enjoyable knowing which insights, both bad and good, have come to light. This camera cage is the latest in design from SMALLRIG, at least it is in April of 2025. Including the larger cut out for the hot shoe mount and the arca plate swiss mount made right into the bottom of the cage. I don't want to restate all the improvements it's made, but rather point out this is better buy now, than it was a couple years ago. More bang for your buck! And out of the box, what you get is the cage and small baggie containing the securing clip, screw, and allen key. No plastic, I like that. I bought this camera cage mainly for protection of the Sony ZV-E10. The aluminum construction feels great and will protect the corners of the camera from falls that would have caused major damage. Even being aluminum, this will make the camera even more heavier; although, this is the case for all cameras. The cage also makes great use for extra mounting points to turn this little guy into a entry-level "Rig". With the addition of a cold shoe mount on the bottom, 1/4 - 20 and 3/8 inch screw points, you could mount monitors, stands, lights, and microphones. Three 1/4 - 20 threads along each side, four on top with one 3/8, and five on the bottom with a single 3/8 thread as well. I like that it comes with a small silver flat head tool that magnetizes itself into the bottom of the cage. Convenient. I like the fact that it has both 1/4 and 3/8 female threads. Versatile. The camera in it's stock form comes with a very subtle hand grip, I absolutely love the feel and added girth the cage gives you with its silicone grip solution. Incredible. A few drawbacks I noticed. I mount a Arca Swiss plate on the top of the cage with a 1/4 - 20 thread and clamp it to my overhead rig. If you want it dead center, you sacrifice the ability to switch the camera on/off because the switch itself becomes blocked by the overhang of the plate. I remedy this by just shifting it over one to left, and it works fine. And if you have tiny fingers, or small plate this could be your remedy! The depth at which the cage makes the battery compartment can be tricky to get the SD Card and Battery in and out. It's really not a big deal, just takes some time to get used to. Lastly, I may be very well doing it wrong, but the mounting clip that secures the camera to the cage, doesn't fit as tight as I would want it. Meaning, when securing the clip by inserting it into the camera's original dongle mounting location and using the provided screw to fasten them together, the clip doesn't look flush. I tried keeping the bottom screw loose and doing it again, but was unable to flatten it. I'll include pictures for you fam. These really are minor nuances and make no impact on overall satisfaction on the SMALLRIG camera cage for the Sony ZV-E10. Don't get it twisted, I love this thing! It's almost a necessity. Unless you want a really sleek and slim look. It's incredibly useful, with all it's mounting options and the protection it provides alone, is worth the reason to get one for yours. It's worth the cost compared to a new camera. No exaggeration. This cage is for anyone with this camera and I wouldn't recommend anyone to go without it!

Great camera cage — holds a lot of gear, the grip is nice and sturdy, and it protects the camera really well. Exactly what I needed.

J'ai acheté cette cage pour plusieurs raisons : - Déjà j'ai mis un peu d'argent dans mon appareil et même si ce n'est pas un modèle de photographe, je tenais à le protéger. - J'ai pas mal d’accessoires et je n'ai qu'un seul pas de vis sous mon appareil. Donc impossible d'en monter deux simultanément. - J'ai des lampes pour faire des éclairages d'appoint et comme l'embase est en métal, je ne tiens ABSOLUMENT PAS à les monter sur la griffe à dégagement rapide de mon appareil et que cela fasse un court circuit. J'ai donc commandé cette cage. J'ai bon nombre de produits de la marque Smallrig et je n'ai JAMAIS été déçu. Ici, le produit est dans la continuité de ce que propose la marque. On est sur une cage en aluminium à la finition parfaite. Tout est pensé, on a un revêtement caoutchouc sur toutes les parties en contact avec l'appareil. La cage se monte au moyen d'un outil qui est dissimulé dans la cage et qui tient avec un aimant. La poignée en silicone offre un maintient bien supérieur à la poignée native de l'appareil (un peu plus imposante mais le grip est bien meilleur tout comme la préhension de l'appareil). Tout reste accessible à 100%, les boutons d'enclenchement vidéo, photo, réglages etc... Et bien entendu toutes les connectiques et logements pour batterie et carte SD. Et pour finir, on a des pas de vis absolument de tous les côtés. Je ne saurais dire combien d'équipements on peut monter simultanément mais on peut upgrader sa config de manière vraiment significative. Et on a une griffe de dégagement rapide directement sur la cage. On peut donc monter un éclairage d'appoint à base métallique sans aucun risque pour l'appareil. Alors oui... l'appareil prend 75 grammes au passage. Mais au regard des tous les avantages derrière, c'est vraiment un tout petit désagrément. Personnellement c'est un coup de cœur pour moi ❤