Grohe 47158000 Non-return valve, Starlight Chrome

They worked great, I wish the description told you that these were updated from the old back flow check valve type

We had a drip in our shower. After watching several you tube videos this part is in many cases is the reason your shower leaks. Make sure you use grease before inserting cartridge. Grohe has great customer service. If you need a diagram or their recomendation call them. Only complain is cost of parts. This is a DIY project. Money saved not having to pay Plummer.

Item had been used or previously installed. Had to spend 1/2 hour to verify it was a legitimate OEM part for Grohe. Way too expensive for 2 small plastic parts. Will never choose to install Grohe Brand products.

I really struggled with this, so here are my notes: Grohe 47158000 Non-return valves Do not replace these two valves unless the faucet is leaking when the handle is in the off position - that leak indicates these need to be replaced. New non-return valves can be faulty and not open - blow hard on the round side to see if they open and work before installing larger end faces the valve body opening use Danco #35 (11/16” outer diameter x 9/16” inner diameter x 1/16” wall) O-Ring if original o-ring tears and faucet leaks because of tear during installation Tightly wrap two layers of pipe tape and add silicone grease before installing Use old cartridge to help seat the two non-return valves (they fit very tightly and there isn’t room to get leverage to seat them). Rated a 3 because I received a bad valve that didn't open and that was really puzzling during the installation process - I learned to test the valve first. Grohe 47157000 Tiief Cartridge Will wear over time. Use silicone grease on portion of the body that will be in contact with the non-return valves - this is a very tight fit and the grease is necessary Install in the off position, then slowly open the cold and hot brass side valves one at a time to see if the non-return valves leak. If they leak, then replace or reseat the non-return valves. If no leak, then close the hot and cold valves, and proceed to screw on the brass cover plate to seal. Slowly open each cold and hot brass side valves to see if a leak occurs. If no leak, then open the cartridge valve body to see if the body fully opens and the correct amount of water is flowing. If good, then replace the remainder of the parts including the chrome parts.

Very important! Each piece has 2 parts external and incerts. Incerts for some reasons installed he wrong way. If installed the way it came it will not work. After I realized what is going on I pushed incerts out, turned and reinstalled. Now it works fine. Just blow in it before installing and check what way flow will go.

Must have for repair or maintenance of Tempress II shower faucet mixture module. My module wore out and my filter broke and reduced my water pressure. Replaced them and got my original water pressure back.

Fixed my shower right away! Great European shower product and will buy more to stock up before they discontinue item. A little pricey but definitely works and is great quality.

Grohe quality control , if any , has once again FAILED ..,.Make sure the filter screen with the little springs in them "come from the manufacturer Installed correctly" .THE X shaped side should be facing towards the inside against the cartridge .They were in backwards when I received them causing MUCH AGGRIVATION AND LOST TIME ,No water pressure ,ALSO the 1st cartridge was broken in the box......this is what a previous customer wrote...Works but with caveat. Reviewed in the United States on May 4, 2026 Verified Purchase Very important! Each piece has 2 parts external and incerts. Incerts for some reasons installed he wrong way. If installed the way it came it will not work. After I realized what is going on I pushed incerts out, turned and reinstalled. Now it works fine. Just blow in it before installing and check what way flow will go...Thank you, I rest my case

Gracias

I paid a bit more for this product but it arrived quickly and was perfect

Exact replacement for my shower.