EZDIY-FAB GPU VGA PCIe 8 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card-Reverse Type 3-Pack

Don't let some other reviews fool you about these being unsafe. It seems that there are some people reviewing these that understand how to use a multi-meter, but don't really understand how GPU's are powered. Yes, all of the ground pins are common as are the three 12v pins. This is NOT dangerous, and it is NOT a short as these people are implying. It seems they decided to use a single ground plane and a single 12v plane on the circuit board. The GPU only uses 12v and ground. As long as you're getting the proper signal on the proper pins, which all five that I've bought do, you're perfectly fine. If you were finding the ground and 12v bridged... that would be a short, and would be absolutely dangerous. Not a single one of these that I've bought have had a short. You can ignore the reviews saying these are unsafe because the grounds are all common as well as the 12v, and that's perfectly safe for this applications. These people simply do not understand what they're talking about. As to the rest of the product. They do what they do well, they're constructed about as well as you can expect them to be and they look quite good... much better than the majority that just put some foam on the back to protect the exposed circuit board. Above all else, they're safe to use. My one complaint is that there is no latch, which makes sense if the latch is on the inside of the connector as it would be very hard to reach. However, once connected, the connection is pretty snug and they don't back out easily. I'm using a different set on a 3070 Ti and they've been working great. I was using this set on a 3080 Ti, but opted to go with the Thermal Grizzly WireView. Not for any shortcomings of this product, but the way I have the GPU setup and my custom cables, it was pulling on these in a way I didn't like and the WireView is a single block making it more ridged for this application. It's also nice that it can display how much wattage and current the GPU is currently consuming in real time. However, it is quite a bit more expensive. If you need a 180° adapter and you don't want to spend a lot, but you want it to look nice, these are a must. Just be sure that the orientation is correct for your GPU. A lot of people are giving these bad reviews because they didn't read and bought the wrong kit. If you're willing to spend more and you'd like to be able to see the current power consumption, I highly recommend the Thermal Grizzly WireView.

I give this product 5 stars without hesitation. The build quality is excellent, very sturdy and fits perfectly on my GPU setup. It makes cable management so much cleaner and prevents bending stress on the cables. For the price, it’s honestly one of the best accessories you can get. Simple, effective, and works exactly as described. Highly recommended!

These are handy little adapters. They connect easily, are of high quality and they are very durable.

I didn't need this to solve Nvidia connector problems, but thought I'd try the different look of the adapter. They plugged into cable and gpu clean and easy, and the manufacturing quality looks great. It's been 4 months with no issues and I now love the look with no bending cables. The 8pin cables now lay flat against the gpu backplate

these things saved my ass. they work great, exactly as expected, quality is great as well.

Just got these because my CPU cooler (Noctua D15...BIG BOY) is a little too big and causes issues with the power cables for my vertically mounted GPU. These work fantastic so far. They are a great fit to my Saffire Pulse 7900XTX. My only issue with them is that the build quality is a little meh. If these were to be frequently reinstalled I feel like they might eventually fall apart but its really just the outer plastic housing. Since its for GPU, that shouldn't be a thing though because you should only ever really have to remove these if taking your GPU apart to re-paste the chip. I don't see me needing to remove these anytime soon. Will be buying some more for my wife's GPU next. Great pricing too!!!

Did a minor upgrade to my computer to get ready for Windows 11; Intel i7-6700 to AMD 3700X. The new motherboard, installed in a horizontal case, had the PCI-e x16 right under the 200mm case fan. So, after installing 6750X GPU and plugging in the 2 x 8pin (split), the cable loop was hitting the fan, preventing fan to spin. The 180 Degree Angle Connector is low profile and moves the cable downwards towards the motherboard. The fan now spins freely. The secondary effect of the connector is that it makes the GPU more aesthetically appealing. As if there are no cables connected to the GPU when looking down.

DO NOT USE! You would thing a simple power pin passthrough would be no problem for power delivery. Wrong! For months my computer would randomly crash while gaming. I uninstalled drivers, reinstalled drivers, rolled back drivers, reseated ram and cpu, reinstalled windows. Nothing worked. I finally thought, well let's just simplify and remove unnecessary parts. These were the first to go and all my issues have been fixed. These were not delivering appropriate power to my Radeon 6950 XT and was causing a wide range of crashes from crash to desktop to full system crashing. I've always read across multiple sites to not use these kinds of adapters and also never use power cables not made for your power supply. They are correct and I am lucky these did not fry my graphics card. DO NOT USE!

worked fantastic, worked on my rtx 3080 for about 2 years now working on my rx9070xt, don't get hot, good quality, look good for my case to make it better on the angles, very good value, and brilliant durability

Con este producto los cables van directamente a la tarjeta gráfica y no se notan, parecen se buene calidad y no he tenido problemas para ahora

A me piace qualsiasi accessorio che serva ad aumentare l'ordine dei cavi e dei componenti all'interno del PC, qiundi ho acquistato questi connettori sicuro del risultato. E infatti è stato proprio così, adesso i cavi della mia scheda video RX5700xt sono ordinati e ben allineati nel PC. La versione "reverse" comprende 3 pezzi da 8Pin, mentre nel mio caso ne servivano soltanto uno da 8 e l'altro da 6 ma nessun problema: è bastato tagliare con un taglierino una parte della plastica che unisce gli 8 pin e via, entra nel connettore della scheda grafica lasciando fuori i due contatti che non servono. Il terzo connettore l'ho subito adoperato per un altro Computer, quindi non è avanzato niente, e anche se fosse avere un connettore di riserva non fa mai male. Un buon prodotto.

Bought these on a whim and had them kicking around in my small parts box. Ended up using them on a I 7 14700k/9070XT build my company Deadseacustompcwurx.ca was commisioned to build. They helped bring the look of the build up a notch!! Wouldnt hesitate to use them again!!

Use estos adaptadores en dos maquinas diferentes, en una máquina (la principal) mejore la estética moviendo el cable hacia atrás del Gpu, en la otra maquina (pc de recamara) el panel de mi nuevo gabinete Home theater Pc horizontal no cerraba por los cables de alimentación (muy arqueado y tiesos, ahora con el adaptador el panel del gabinete cerro sin problema. Justo lo que necesitaba.