Table Mount Compatible for Logitech X52/X52 Pro/X56/X56 Rhino/Throttle Quadrant/Thrustmaster Warthog 10C & throttle/T.16000M FCS/TCA Officer Pack Airbus/TSSH Handbrake/VKB Gunfighter MK.lll etc

When i originally bought this item i thought the price was a little steep and it came in and i was pleasantly surprised, it's HEAVY weight coated steel and i mean HEAVY, it's very sturdy and mounts to the desk super easy, you do have to put it together and it looks a little daunting as there is a few pieces and 2 bags with ALLOT of bolts n things but with the easy and i mean easy to follow guide it's a breeze, if anyone is on the fence thinking of buying this just buy it, there is literally no flaws, the quality is top notch overall it's a rare 10/10 !

Amazing product, made from solid metal, quality parts and options galore, enough screws and nuts for every HOTAS on the market. Price better than most, but don’t let the low cost sway you, the quality is fantastic, definitely recommend.

I love this setup for my Logitech X-52 HOTAS. I did have to improvise a bit to angle the stick and throttle because my desk is V shaped. They are still very solid though. My only real complaint is that all the metal corners are very sharp and they HURT if you bump into them. I would think including some slip-on rubber stoppers and corner guards would go a long way. I also improvised my own solution for this with some adhesive pads and electrical tape. It's not pretty but it works. A minor issue is that I would like to see at least two screw holes on the mount for people who want a more permanent setup. The clamping mechanism is decent but there can still be a little wiggle. There is one screw hole but I think it's intended to mount an accessory on top. I actually used that to drive a screw into my desk for a little added stability. a second screw would really eliminate all wiggle but I haven't tried to drill through the metal to put one in. Happy flight simming!

Pros: 1. Very well built, 5 mm steel mounting plate 2. Good strong adjustable clamp 3. Good quality nuts and bolts in mounting hardware, including spring loaded captive t-buts for extrusion. Lots of mounting options with including install plates and bars, with a big con mentioned later. 4. Mostly pre-assembled, just needed to install horizontal mounting plate to extension with 4 nuts and bolts. And the stick and throttle mounting plate and cross bars. Cons: 1. Heavy, moving it around is a little laborious 2. Extrusion is a little skinny, a wider and thicker extrusion would minimize the little flex it has 3. Clamp screw should have a locking nut, so it won't accidentally change when moving the mount 4. Locking action in clamp happens at the end of the travel, so it's easy to bump and unclamp it. I used a couple of velcro straps to secure the clamp handle. 5. This is the bigger con, the mounting plate is too short for Orion 2 Throttle body, which is based on the Thrustmaster Cougar hotas. It was good for my very old but faithful Saitek X45, but short by a half an inch for the Orion 2. I bodged it by tilting the front mounting cross bar at an angle and mounting it with 3 screws. For the price, I am not happy with having to hack the Orion 2 throttle install. If you have that or a Thrustmaster this won't work for you. If you have something else, this pair of mounts is pretty good for the price.

I was a bit hesitant as there are a bunch of these exact-looking mounts on Amazon, all with differing reviews. This set seemed to have the best reviews for the price, so I purchased them and they are fantastic. I am using these with the "Thrustmaster TCA Sidestick Airbus Edition" together with the "Thrustmaster TCA Quadrant Airbus Edition" and "Thrustmaster TCA Quadrant Add On Airbus Edition" (copied and pasted the names exact from Amazon) and they all fit and work perfectly. It is amazing the difference in immersion when the sidestick and throttles/controls are at a manageable height on my desk, as opposed to being up on top of the desk. I can naturally let me arms sit relaxed and my hands can easily reach all controls. They are a bit of a pain to put together ... took me about 15-20 minutes for the 1st one, but the 2nd one was very simple once you know how everything goes together. It does also take a few tries to get the positioning right on the desk so it all feels comfortable, but once that's all done, they are so easy to setup and pack away for use with the quick-release handle.

Its actually a well built set of mounts. I recommend it for sure. On the heavy side, which is ok. Its exactly as pictured. Has extra mounts for both Flight stick set ups HOSAS, and a traditional HOTAS set up. I do recommend using washers to add to all the bolts. Over time it starts to come loose, and move around. Another tip for easy adjustment. Buy some Wing nut style screws, the ones that have bigger plastic grips, so you can move things easier on the fly. I have mine attached to about a 3/4 inch desk, this thing could attach to something 8" im sure.

After doing a lot of research, I decided on these mounts. Glad I did. Very heavy duty. Came with double mounting plates and brackets to configure anyway you would need. Will work with most all joysticks and throttle HOTAS setups. Came with two huge bags of nuts, bolts and washers. Great quality.

I’m giving this two stars for the decent build quality. But since it doesn’t actually fit the TM Warthog throttle like as advertised, I can’t give it anymore stars. The problem is you can’t mount the throttle as it’s too long for the provided cross brackets. The mounting holes on the end of the throttle don’t line up with the holes on the mounting bracket. I guess I’ll use some mounting tape. The kit comes with tons on mounting hardware which is nice. However I wish they would add some extra spring t nuts as one could take advantage of the profile piece and mount more accessories.

Reçus et montés aujourd’hui : il y a bien 2 supports dans la boîte ! Montage simplement à terminer. Support de table déjà monté, reste l’équerre horizontale et le support adapté à votre joystick ou manette. Bien assez de visserie pour permettre de tout fixer. Construction solide. Aucun regret. Merci à ceux qui avaient fait des commentaires positifs avant le mien, ils sont mérités. Je partage des photos au d’emballement et après installation. Bon jeu à vous o7 Citoyens 😉

When I originally bought it, I didn’t think it was gonna be so good, I was looking at other mounts, especially the monster tech mounts, but they were very expensive so I decided to give this one a go When I originally bought it, I didn’t think it was gonna be so good, I was looking at other mounts, especially the monster tech mounts, but they were very expensive so I decided to give this wanna go erase, and I wasn’t disappointed. The construction is very sturdy and it is very durable. It comes with several types of mounts and you can basically fit any joystick in it which makes it perfect if you don’t know which kind of joystick you want to buy or if you intend to buy other joysticks in the future The clamp mount is very solid and it’s very fixed, actually, the whole construction is extremely well-made and you can see it is made to last. One point to notice though, is that you will have to assemble it yourself then if you’re not very good at assembling stuff, then you should probably need help, but this is one of the best cost benefits I’ve ever encountered in this sort of mount, totally recommend

Producto muy solido. Practicamente montado desde la caja, lo cual es de agradecer. Adaptadores, tornillos y tuercas de sobra. Producto fantastico!

Snel geleverd in een flink zware doos. Gelukkig komen de houders al geassembleerd met de klemmen erop. Het monteren van de horizontale houders is een beetje een priegel werkje, Maar eenmaal vast aan je bureau maakt het een veel betere houding van je Joystick/Throttle combinatie. zware afwerking zonder wiebel tijdens gebruik. 5/5

These mounts are amazing. I admit to being sceptical regarding how good they could be for the price, but I needn’t have worried. I have mounted a TM Viper TQS Throttle and a Virpil Warbrd-D Joystick with no issues at all. The components are of very high quality, very sturdy and heavy in construction, and with a very wide range of mounting plate options. All manner of fixings are included to ensure compatibility with a wide range of products. They are easy to assemble and come with 2 allen keys (one end has a ball end, which is a nice touch), and they clamp very firmly to a very wide range of desk thicknesses. I can’t fault them!