ASUS PRIME H610I-PLUS D4 LGA 1700(Intel 12th Gen&Intel vPro)mini ITX Motherboard(PCIe 4.0,DDR4,USB 3.2 Gen 1 Type-A,1Gb Lan,DP/HDMI/D-Sub,V-M.2(E),Q-LED,Mono-out header with amp IC,SPI TPM header)

Typical basic Asus motherboard. Looks good, fits perfectly. Needed no BIOS update.

Use a i5-13400 and 4060 low profile

It says it will support 13th Gen processors, and it does, but not without a bios update.You CANNOT do the bios update if you only have the 13th gen chip. You have to have the 12th gen chip to boot to bios then update the bios then you can use the 13th gen.The error light will be solid yellow and not advance indicating a FALSE dram issue. Even ASUS support tried to tell me it was a ram issue. I borrowed a 12th gen chip and did the proceedure above without issue.I hope this saves someone the expense and frustration it took me to figure this out.

I bought this motherboard for a compact computer build for my longer term stay in China. It runs Windows 11 right out of the box with no issues 3 months later. I’m using it with an Intel Core i5-2400 processor in a Cooler Master NR200 small form factor case. For me this motherboard is a no hassle setup and I wouldn’t hesitate buying it again. Built in wifi would be nice but that’s not a big issue.

I purchased this motherboard in advance for a 3D printed computer case I designed, which I finished this weekend. I wanted a cheap motherboard to use in this build, so this is the option I purchased since I have used ASUS motherboards previously.Firstly, the price is fantastic. This is by far the most alluring factor in purchasing this motherboard. It functions, has a basic BIOS, and is usable. However, it is obvious which corners were cut to keep the price of this board so low. There is almost no I/O on the motherboard. I know mini-ITX boards typically don't have a large selection of ports, but there is about 4 USB ports total. This is lower than any other motherboard I have used and if you use a keyboard, mouse, and USB headset then 3 of the 4 ports are already being used. There is no wifi included, so if you plan on installing a wifi card just spend the extra money on a better board with wifi.Also, I hate the design of this board. These mini-ITX boards are small and therefore have less space, but it almost feels like it's designed to frustrate you. For example, the case fan headers are directly under the CPU cooler. This means, depending on the cooler, you will have to either plug in case fans before installing the cooler or remove the cooler later to connect the case fans. Not ideal at all. Another design I don't love is for the M.2. The location requires you to install it over a heatsink covering the motherboard chip. The problem isn't that it goes over a heatsink, but that the M.2 standoff to screw it in is so shallow that the M.2 bends slightly over the heatsink.If you need the cheapest intel motherboard available in mini-ITX form, this is your board. Otherwise, buy something a little nicer.

It works very well.

came with a messed up ethernet port that drops connection. Luckily I had another network card laying around, ymmv.

A saviour for affordable Mini-ATX board. Transfered Wi-Fi 9560 cnvi module from ROG STRIX Z390-I successfully.