Upgrade T-7000 Black Adhesive Glue for Phone, Cridoz 110ml Waterproof Jewelry Glue Precision Craft Adhesive for Cell Phone Screen Repair Glass Wood Crafts Metal and Stones

Worked very, very well to reattach the screen to my phone after replacing it. I tried he tape several times and it's garbage and failed several times. This glue worked well the very first time, and you get a LOT for the price. Be warned, it is hard to get off of your skin.

This glue works quickly and effectively used it to glue my cell phone after the repairs were made

This product is great I used it to fix one of my phones and this glue was perfect for the glass it is also useful on other type of materials excellent product

A very simple to use adhesive not just for cell phone LED screen reassembly, but for other electronic systems. This liquid adhesive I easy to use compared with other adhesives as glue strips which may not conform to a devices contours. Affordable and a great adhesive amount per tube. Very affordable.

I just repaired my friends phone and it seems to be holding well. It's doing it's job of holding the screen on. Time will tell how long it will hold.

Worked great phone is still working perfect!!

Excellent for putting cell phone screens back in, seems to create a very watertight seal and has a nice needle point to apply the glue with. Just remember though never try it unless you know you did a very good job re-glooing it, don't forget the clamps

So I ordered this because the adhesive strips that the Sony Xperia XZ1 uses are pretty unreliable at times. I was recommended this adhesive and so I ordered it. On opening it I noticed that the English on the tube is rather rough and slightly numerous. I also noticed that the tube is HUGE I ordered the small size as I only needed a single application and I was greeted with enough for around 200+. The glue is kinda watery and you have to be fast with it. Just get in, draw some fast, straight, lines. Clamp it down and be done with it. It's stated that it takes a day to cure. Weirdly enough I find that only a few hours in the screens on there good. Regardless I'm going to leave the clamps on for the full 48. On the test sample that dried, the glue appears to be rubbery and highly flexible. It gets tacky when it starts to dry and it starts to dry in a few minutes so you gotta be fast. If you clamp down the screen and some oozes out, that's fine. You can trim/tear off the excess or you can get some isopropyl alcohol and clean it off with that. Time will tell how long it will last but it's doing great so far. I will update this review as needed.