Peak Design Cuff Camera Wrist Strap, Compatible with DSLR, Compact and Point-and-Shoot Cameras, Low Profile, Quick Release

This wrist strap is exactly what I was looking for. The design is sleek and minimal, but still feels extremely secure when attached to my camera. It comes with two anchors, which is a nice bonus, and they’re fully compatible with other Peak Design products. I already had a shoulder strap from them, so being able to swap between setups instantly is a huge convenience. The anchors themselves are impressively low profile and don’t get in the way when shooting. They’re rated to handle up to 200 pounds of tension, which adds serious peace of mind. I also appreciate the built-in safety feature. The cords are color coded, so if they start to wear down, a yellow layer becomes visible as a clear warning that it’s time to replace them. Overall, a well thought out, high quality accessory that makes carrying and handling my camera easier and safer.

My favorite camera accessory, by far! The wrist strap is comfortable and secure and the system is ingeniously simple, yet reliable. I use the Peak Design strap system on multiple cameras. My most extreme example: I use this to carry my Canon 5D with Tamron 150-600mm lens on short nature walks and, when my hand gets cramped from holding the grip, I just let the setup hang from my wrist strap for a moment.

Over the past few months, I’ve been testing more and more camera gear. The wrist strap is something I never really thought much about until my time with other Peak Design products. Learning how all of their straps work together via their unique Anchor Link system really made me take notice of them and the wrist strap they call the Cuff. When taking my camera on and off tripods, sliders, neck straps, monopods, and now, wrist straps, I like to find ways to cut down on the time between swapping devices. It has been a priority to me. This is the main reason I switched from the Bogen/Manfrotto quick release plate to the ArcaSwiss style quick release plate systems and the same reasoning I have for switching all my straps over to Peak Design straps. I save time and hassle by using the products from Peak Design and it is outstanding. The Cuff is a low profile wrist strap that can be worn as a bracelet so that it is out of the way when it’s not in use but can be quickly applied as a wrist strap by snapping it into place with the Peak Design Anchor Link. I can go from handheld to unstrapped and back on my tripod in seconds. Because Peak Design uses a plate that is designed to work with ArcaSwiss plates I can leave this plate on my camera and switch from the Cuff to the Neck Strap to my Monopod faster than unscrewing a standard strap’s 1/4″ screw from the camera. The Cuff is made out of some incredibly strong materials. The strap features seatbelt-style nylon webbing with an anodized aluminum adjuster hardware while the connectors have anti-abrasion thermoplastic-corded Anchors. The Peak Design Clip is designed to handle over 200 lbs. The Cuff isn’t just for cameras, too. You can use it with binoculars, GoPros, rangefinders, tools, and more. What comes in the box? Peak Design includes the Cuff and two of their Anchor Links. These are a newer style and are not flat like the previous models. They are designed to be easier to clip on. The Cuff also comes with a Peak Design sticker and a small carrying pouch. I can’t really get in words how truly wonderful this is. Needless to say, the Cuff is built very well and feels like it will last a long time. The threading looks like it was tightly sewed and all-in-all, I don’t have any complaints with this product. Some people may say, “Who needs a wrist strap?” I personally feel better knowing my $3500 camera is safely attached to my wrist in the event that it gets knocked loose from my grip. It could happen easily when you are in a crowded room and trying to set up your gear or while you are breaking it down. Getting bumped while shooting interviews or just trying to take a break off to the side can cause catastrophe and having something like the Cuff to ensure that my Canon 5D Mark IV doesn’t smash to the ground is priceless to me. The Cuff might be a bit pricier than other wrist straps on the market coming in at $29.95 but because of the ecosystem that Peak Design has created, it’s worth every penny in my opinion.

The Peak Design Cuff is hands-down one of the best wrist straps I’ve used. It’s incredibly comfortable, with soft yet durable materials that feel great even during long shoots. The quick-connect system is brilliant — fast, secure, and super easy to swap between gear. I also love the magnetic clasp that keeps the strap tidy on my wrist or out of the way when not in use. It gives that extra peace of mind without adding bulk. Stylish, functional, and built to last — a must-have for photographers who like to keep it minimal and secure.

Great build, sleek design, the material feels sturdy.

So realistically it does exactly as it says, its a wrist strap and it looks great to boot what more do you need? well I have to mention a couple of flaws which are more frustrating than anything but here we go. First is that it doubles up as a kind of bracelet so you essentially remove it from the quick release (which is great by the way) and then simply wrap the strap around your wrist once more then a little magnet keeps it secured, this creates an easy to carry strap that removes the need to take it off completely. Whilst in theory this is great it depends heavily on your wrist, apparently I have pixie wrists, well I don't but this strap seems to think that I do. Now a little work around is that the little magnet can be slid up and down to adjust where the clip attaches but even as far as it will go its still a tad out of place. I'm not even sure if this is by design but it falls a little flat all the same. My next annoyance is that the strap appears to be permanently 'marked' where the magnet was sitting it created a square of worn leather, again its minor but hardly something you want to see on a brand new product (see pictures) it doesn't bother me too much but something to be aware of if you get the silver one at least where it may be more obvious. all in all it is rather minor issues and I had heard the magnet isn't that strong to hold it in place but it seems pretty strong to me so maybe they improved this? either way I never bought it for the magnet feature. Its just an added bonus so I can over look that, and just see if for what it is, a strong, well made and great looking strap, it does what it says on the tin and the quick release is a dream, how did I live without this? :)

very comfy, paired well with the same hardware that came with their leash. fits my xt-1 great. Its strong enough I can use it with my full sized canon!

Great quality, looks great, too. Easy to adjust and even better than I had hoped for. Will be buying additional ones for camera collection.

Tudo que é da Peak Design vale o preço, produto bem acabado, fácil de usar, vem com um saquinho de embalagem, e dois fios extras

Love the pucks and now also live this little strap!

You get what you pay for and for this camera accessory, there’s a reason why it commands a higher price compared to others. It may seem like many other camera straps, but it’s engineered very differently, having a clever attaching mechanism that is simple but very effective, strong and seems very dependable. Since being a photographer, I have heard of Peak Design for many years and had been using a different system but was looking to change, especially to use in my professional work, something simpler but efficient, knowing how well received this new brand is. This system has a more fluid eco system and very well engineered and thought out products, so I can expand further into their products as and when needed. My only one tiny criticism, when the strap cinches on your arm, I would like an ability to somehow lock it, so does not fully squeeze around my arm, perhaps something in the next iteration. I’ll probably engineer something myself to enable me to do that for now. This is professional product no doubt and worth every penny.

Si buscas una forma cómoda y segura de llevar tu cámara réflex, es la correa perfecta. Su diseño minimalista y funcional combina a la perfección con la estética de cualquier cámara, mientras que ofrece una sujeción excepcionalmente confiable. A pesar de su tamaño reducido, proporciona una sensación de seguridad total al sujetar la cámara. Gracias a su sistema de anclaje Anchor Link de Peak Design, puedes engancharla rápidamente, lo que facilita el uso en situaciones dinámicas, sin preocuparte de que la cámara se pueda caer. La correa es ajustable, por lo que puedes adaptarla perfectamente a tu muñeca para tenerla siempre a mano y lista para disparar. El material utilizado es resistente pero suave. La calidad de construcción es impecable, con un acabado premium que es habitual en los productos de Peak Design. ¡Una compra recomendada!

Expensive but fantastic.