Headlight Assembly

These are a good quality and were a perfect fit for my 2011 Nissan Titan. Came with high beam and low beam as advertised, not the side marker bulb or the blinker bulb. Something I did notice before I purchased was the 2011 Titan has Amber shaded blinker and side marker lights on the assembly, this one is all clear. So, you won't be able to use the current bulbs if you also have an amber shaded lens, otherwise your blinker and side marker will be bright white also. I just ordered some led replacements for both in an amber color. Another note, if you purchase a 3156/3157 led replacement for your turn signals, make sure to get one with a built in resistor or you will have "hyperflash" where your turn signals will flash faster than normal and may get an error in your instrument panel advising that you have a burnt out bulb. Or you can just order the old style 3157 in an amber color and not worry about hyperflash. Also, know that on my 2011 anyway, there is a piece of trim that attaches to the bottom of the headlight assembly. You will need to remove that trim and add to the new assembly. I recommend searching youtube on changing the headlights out so you can see how that trim detaches. It has those plastic grommets that look like all the others and you think you can just squeeze them and pull them out, but actually all you have to do is slide them both to the side at the same time, which is rather easy. Mine didn't attach to the new assembly tight enough to stay in place, probably worn out. You may want to get some new ones before installing. I didn't, but I didn't really care about future changes as I don't see myself changing these assemblies again in the future, so I just hot glued them in place. If I do have to replace them, I will just have to dig the hot glue out from around the inside of the grommets. Another lesson learned for me, before putting it all back together, test your lights after plugging them in. The plugs will allow you to inserts the wires in both directions. One being right and the other being wrong. When I tested my driver's side, the high beam wasn't working. I played with the connection, unhooked and rehooked it up and it started working, so I thought I just had a bad connection. When I went to install the passenger side, neither the high or low beam was working. That is when I realized I inserted the plugs upside-down. When I flipped them over, both worked. End result, both are working great. Nice and bright and has a nice clean and crisp appearance. No gaps between the assembly and trim or grill. Everything bolted up using existing equipment and holes/grooves/et cetera thout having to drill or relocate anything. Looks like the old ones did, only new and cleaner.

The items looked awesome opening the box. I installed the headlights with new T3 HID bulbs. On the very first day of installation, I washed my truck and whatta ya know. WATER GETS INSIDE THE HEADLIGHT. This usually takes years before it happens, never on the first day. The passenger side is flawless it’s the driver side that’s ruined.

I bought these lights for my son's truck. It was installed within 30 minutes. The down side it that the side lights that are recommended to be an orange color this does not come with it. Wish I would have know a head of time so that I could have bought those as well before giving this to my son. He had to spend more time to put those in since we did not have them when we were putting these lights on his truck.

Up Side - They look awesome and install fairly easy. Was impressed with how perfectly the mounting holes line up and leave some room for adjustments, if necessary. The beam alignment function was also easy and had a good vertical range, but no horizontal adjustment. Down Side - The lower trim mounting holes are larger than my model year. Seen reviews where newer models didn’t seem to have an issue, so Nissan may have used larger diameter fasteners in newer models. If they had inserts to fit OEM trim pins, this product would’ve gotten 5 stars. Note: I live in Southern California, so I haven’t experienced moisture in the light yet, hopefully that doesn’t become an issue.

There are fitment issues with accessories. The valance wont stay on the holes were made to big for the factory clips. The high beam bulb seat is off set , so if using led bulbs the element will not sit up and down the light pattern is strange with dead spots.

Gives it a more modern look

These headlights look great. But the holes for the body colored trim piece that fits to it is too big. Now I have to try to find a way to Jerry rig it together. If I can't, I'll have to send them back. A major oversight. Not worth the frustration. UPDATE 29 Mar 2023 I used zip ties to attach the trim pieces. It worked out fine. But now, my driver side light holds moisture inside of it in the morning and at night. I'm going to try to ask for a replacement driver side headlight unit. Again, the lights look great, but the detail quality is very suspect. Buyer beware. UPDATE 30 MAR 2023 I found a small piece of breathable tape about an inch long on the back of the headlight. I guess this is the way it vents because there are no other holes. I poked some bigger holes in the breathable tape yesterday, but the light is still condensed on the inside. I'm going to remove the tape tomorrow and find a way to block water from possibly getting in. I'll keep updating. 11 April 2023 Both lights are now showing condensation. The one I altered is a little better than the other right now. I'm going to alter both of the again. I have to say. It is not worth it to purchase these headlights. I do not get intimidated by tinkering, but I shouldn't have to with a new product. The lights look great, and perform great with proper LED bulbs. But the condensation and the parts I had to modify in order to get it to fit properly are just too much of a hassle. If anyone is interested, let me know and I can take more pics of what I did. But as of right now, I am condensation free.

Love them, the bottom bezel piece doesn’t fit well in the headlight due to the hole being larger diameter than the plugs, so you will need super glue

مناسب جدا للارمادا

I’ve had these on my truck for a few months and both headlights leak really bad every time it rains or I go through a car wash they fill up with water

Perfect fit ......

مكسور ولكن ممتاز