CaptainGrill Grease Tray with Catch Pan - Dyna Glo Grill Replacement Parts | Universal Stainless Drip Pan for Gas Grill Models from Dyna Glo, Nexgrill, Expert Grill, Kenmore, BHG and More(Width 30"-36")

Good quality, easy to assemble. Fits and works great.

This was great easy assembly and a perfect fit. The parts come wrapped in plastic that must be removed. It can be a little difficult to remove the film but it prevents scratching.

Received quicky, nice product was well made and fit good.

The tray was easy to assemble and it looks like it will work well. But this review is more about my first impressions, as I haven’t used it yet.Complaints about the blue plastic protective covering is warranted. It’s difficult to start the removal process, as you need to dig at it to be able to peel it off. Once you get a sliver to pull on, it comes off pretty easily.The metal is thin, and all the edges are sharp. So you have to be extra careful in handling the sheets. After I assembled the drip pan, it felt like I had multiple paper cuts on each hand.The metal is thinner than the OEM drip pan, but mine developed a hole, so it needed to be replaced. I plan to line it with aluminum foil, so maybe it will hold up better than the original, which lasted 4 years.I paid more attention to the length of this drip pan, than the width. I have a Nexgrill, which has a couple tabs, that act as a backstop for the pan. This drip pan is a little wider than the original, so I’ll need to flatten those tabs so the drippings will flow correctly, as this pan sits on those tabs.Finally, while I wish the metal was thicker, it looks like it should work well, and the price was reasonable.

I ordered this to replace the original drip tray that came with my Expert Grill BG2824B. The original was galvanized steel and began staining and rusting soon after put into service.I set this one up for 26 inches to fit this grill. It fit perfectly and is what should have came with this grill. It is very easy to sweep the drippings right off of this down the hole into drip container.No grease leaks under the grill. When assembling it, make sure all three parts of it are as close together as possible before you tighten the screws. It looks practically seamless and works perfectly with this particular grill.I am a happy customer indeed. Excellent quality, beautiful look and easy to clean up.

I’m prompted to write a review because I was so pleased to find this affordable, compatible part, to replace the completely rotted out original drip tray and grease catch that came with my Dina- glo gas grill. I wasn’t expecting this nice replacement- I thought it would be random metal, that would likely rust like the original, (which had completely rusted through, as had the grease catch that attaches below it.). This is one is stainless steel. Came with a simple page of instructions, and sturdy hardware nuts, and bolts. All I needed was a Phillips head screwdriver. Took 15 minutes to peel off the anti-scratch wrap, which covered the four different pieces entirely. (That took the most time)- the tray assembly took five minutes. (I’m a senior citizen with arthritic hands). Good value for the money at $25. Looks nice. I compared this to other offerings - for example- a single $16 soft aluminum tray like we buy at thanksgiving and will only give you a couple uses, and other that we’re more expensive, are made of other random metal. So This seemed like the best bet. The tray has sliding adjustment so easily fit in the slot under the grill. (I used the old pan as a guide to make sure the new one would fit in the tracks before I trashed it- so that made it super fast). Then I just loosely inserted a couple of screws and tested the fit before I tightened them up. Also make sure that your account for the flexible gas tubing that goes from the tank to the starter but that was really simple, since that flex to is actually adjustable on my grill and probably yours I also put silicone mats on both side sides of the new tray for ease of cleaning as I just throw those in the dishwasher or wash out the sink. The only caution is to be careful taking off the wrap and assembling because edges are sharp. Photo below shows the assembled sheet as I was sliding it in, and then one that shows the catch tray underneath, which also slides in and out for cleaning.

The drip pan in my gas barbecue rusted out. It was also gnarly with grease. Should I just throw the whole thing out and buy a new barbecue? I looked on Amazon and found I could order a replacement that was very inexpensive. It was pretty easy to assemble and super-easy to install: It just slides in. The metal is mirrr-shiny and I feel so much better about grilling now.

That blue film the tray is wrapped in is a menace! It took me about 30 minutes to peel it off. Although the tray is adjustable and easy to assemble, some of the nuts wouldn't screw on properly on the screws. It seems to be a decent piece of equipment for now, but we'll see how long it lasts...

Nachdem ich kein Originalersatzteil für meinen Fat Fred bekommen konnte habe ich mich nach knapp 6 Monaten nicht Nutzung des Grills dazu entschieden ein anderes Blech einzusetzen. Das Blech lässt sich super einstellen, wie es sich im Einsatz schlägt muss sich noch zeigen.

Gruesa y pesada, se ajusto perfecto a mi asador Nexgrill de 4 quemadores... Muy recomendable

très bon bac, s'adapte parfaitement. plus facile a monter qu'a déballer, car très protégé. vis supplémentaires fournis. matériaux de qualité.

Eigentlich toller pasender Artikel, leider ist er defekt angekommen

J’ai acheté cette article il y a 3 ans et je suis encore très satisfait de la qualité du produit. Il est comme neuf, Il s’installe très bien et à ajustable pour la plus part des BBQ.Fini la rouille.